Please Delete

[kevinnnnnn]

ttt

[olhunter]

They're worth whatever you just paid for them.

Maybe less if you bought them from a dealer.

[giants_fan24]

It doesn't matter if its 4'' or 6'' the value is the same. It depends on cond. and if they have there box and paperwork. At 98% with box and paper work your looking at around $1100 to $1200 range.

[Andy Taylor]

Unless the numbers are consective, that means nothing. And even if consective it only means something to the right buyer.

Nice guns though.

[HPGunner]

According to this site your Pythons were produced after 1985.

http://www.guncollectorsclub.com/python_1965.htm

There is some good background provided too.

[fishdude]

i'll give ya $500 bucks for the 6" tomorrow - so now you know its worth at least $500!

[saelee23]

350 for the 4" if your local i'll take it!

[kevinnnnnn]

i'll give ya $500 bucks for the 6" tomorrow - so now you know its worth at least $500!

Really? For that much I'll throw in my AR-15. I can meet you tomorrow in Fantasyland to do the transfer, where a DROS is never required.

[kevinnnnnn]

350 for the 4" if your local i'll take it!

Thats great, get together with fishdude (another purveyer of a ridiculous offer) and we can all meet tomorrow in your dreams to do the transfers.

[ap3572001]

As far as the value , they START at 1000.00 . And go up from there ....

[kevinnnnnn]

As far as the value , they START at 1000.00 . And go up from there ....

Thanks for the info.

[kevinnnnnn]

According to this site your Pythons were produced after 1985.

http://www.guncollectorsclub.com/python_1965.htm

There is some good background provided too.

I think I found the same link as you did but the info stops at 1985. I know they kepy producing these into 1999.

[kevinnnnnn]

Unless the numbers are consective, that means nothing. And even if consective it only means something to the right buyer.

Nice guns though.

Thanks.

[kevinnnnnn]

It doesn't matter if its 4'' or 6'' the value is the same. It depends on cond. and if they have there box and paperwork. At 98% with box and paper work your looking at around $1100 to $1200 range.

Where did you get that information? I've heard and seen 4" pythons consistently sell for more because there weren't as many produced.

[GM4spd]

The 4" in the picture is stainless not brush nickel. Pete