Glock Gen 4 owners...Do you have this problem?

[Guest]

[Matt3989]

I have a gen 4 glock 23.I had a problem getting the slide back on with that bump at first. All you have to do is give it some muscle though and it slides right on no problem. I had a couple failure to ejects the first 200 rounds but since then I have had no problems.

[SarcoBlaster]

The connectors on the Gen4's are rotated 5 degrees counter-clockwise (when looking at the connector) which gives it a slightly heavier trigger pull because the angle that the trigger bar needs to overcome has increased.

[THE NEW GUY]

The connectors on the Gen4's are rotated 5 degrees counter-clockwise (when looking at the connector) which gives it a slightly heavier trigger pull because the angle is increased.

Not worth smoothing that bump with a file?

[Nor-Cal]

Good post!

[bwiese]

Not worth smoothing that bump with a file?

I have handled quite a few Gen4 Glocks and broken them down. Nonissue.

Noobs should never ever take a file or Dremel to a new gun that's already been tested at the factory.

The chance the gun is bad from the factory is very SMALL.

The chance the noob will f*** up something he doesn't understand is HUGE.

[Blackhawk556]

That grinding on the slide has to be causing something. Metal grinding cause more pressure inside so I believe it did add to the trigger pull.

[SarcoBlaster]

Not worth smoothing that bump with a file?

Might be better to swap it out with a Gen3 trigger w/trigger bar if you really don't want the bump on the vertical extension present.

[X-NewYawker]

The GLOCK Gen 4 is the "new Coke" of guns. Instead of redesigning the frame, we get a add on that looks like just that.

[RollingCode3]

How is that a problem? It is a non-issue. Don't listen to some youtube commando and do something that stupid to your glock. If you dont like that bump, get a Gen3 trigger to replace it.

[THE NEW GUY]

I was thinking of getting one next month, stores say its not CA compliant.

Whats the deal on that?

[dr_communist]

I was thinking of getting one next month, stores say its not CA compliant.

Whats the deal on that?

ha ha yea a store were i am said any non roster gun is an assault weapon

from what i hear prk arms in fresno has em

[THE NEW GUY]

ha ha yea a store were i am said any non roster gun is an assault weapon

from what i hear prk arms in fresno has em

Thats one hek of a drive for a glock. Do they ship?

[Cyc Wid It]

Every shop here has them:

http://www.calguns.net/calgunforum/showthread.php?p=5607217#post5607217

[Gio]

Don't listen to that guy. After a few hundred rounds the trigger breaks in and is 5.5#'s, I can't wait to get mine in my hands and take it to the range.