Does anyone know of a way to improve the trigger (both trigger pull and how gritty it is) on the Polish P64? I've tried polishing everything I could get to, and there's some improvement, but not enough to call that trigger decent.
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
P64 trigger improvement
Collapse
X
-
P64 trigger improvement
DiaHero Foundation - helping people manage diabetes. Sending diabetes supplies to Ukraine now, any help is appreciated.
DDR AK furniture and Norinco M14 parts kit: https://www.calguns.net/calgunforum/....php?t=1756292
sigpicTags: None -
The DA pull on the Polish P-64 is 24.5LBS. That 25 and a half pounds, DA my friend. However with a WOLFF 18LB hammer spring, DA pull is down to about 11LBS, with SA trigger pull a light 3.5-4LBS. The WOLFF spring kit from their shop in Eastern Pennsylvania is around $10. A GOOD internal cleaning of old cosmaline and preservative oils also may be necessary. Remember this gun is Milsurp.
Here the link to the Internet forum on the Polish P-64.....a very fine small hand gun and one of my personal favorites for OC or CC in Arizona.
Last edited by GWbiker; 10-30-2010, 11:25 PM."If 5% of Ducks could shoot back, would you go Duck hunting?" -
Wolff springs, of course! Thank you
DiaHero Foundation - helping people manage diabetes. Sending diabetes supplies to Ukraine now, any help is appreciated.
DDR AK furniture and Norinco M14 parts kit: https://www.calguns.net/calgunforum/....php?t=1756292
sigpicComment
-
Got my 17# and 18# hammer springs today (and while I was at it, I ordered the hammer springs for FEG PA-63 and recoil spring pack my Spanish Venus 1908 Vest Pocket knockoff, the latter could use a stiffer recoil spring). Now, the main question is whether to change it right away, or wait until the weekend? Decisions decisions...
DiaHero Foundation - helping people manage diabetes. Sending diabetes supplies to Ukraine now, any help is appreciated.
DDR AK furniture and Norinco M14 parts kit: https://www.calguns.net/calgunforum/....php?t=1756292
sigpicComment
-
Current Armory:
HK p7m8
Dan Wesson Guardian 9mm
Hi-Power Practical
Baby Eagle 9mm
P99 AS
Glock 43Comment
-
Changed the hammer spring to the 17# one (we'll see if I get any light primer strikes). The trigger pull is definitely lighter. The SA trigger pull is around where my 3.5# Glock trigger is at, although with more creep and not as clear reset. The DA is still gritty, although lighter. Looks like more cleaning is in order.DiaHero Foundation - helping people manage diabetes. Sending diabetes supplies to Ukraine now, any help is appreciated.
DDR AK furniture and Norinco M14 parts kit: https://www.calguns.net/calgunforum/....php?t=1756292
sigpicComment
-
Yes stock DA trigger pull on the Polish P-64 is 24.5lbs. but remember this is/was a Military handgun. A real good cleaning and a 18lb hammer spring puts the trigger pull in an acceptable range, but be aware a 17lb hammer spring may result in a very-very light SA pull and you risk doing a double tap when firing DA.
Picked up a LCP .380ACP a few days ago. VERY impressive pocket carry gun.
BTW, the West German Police surplus Sig P-6 DA trigger pull is no where near 24lbs.Last edited by GWbiker; 11-09-2010, 12:31 AM."If 5% of Ducks could shoot back, would you go Duck hunting?"Comment
Calguns.net Statistics
Collapse
Topics: 1,870,843
Posts: 25,176,541
Members: 358,862
Active Members: 5,396
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 29828 users online. 119 members and 29709 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment