Unconfigured Ad Widget

Collapse

Springfield GI accuracy modifications

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • shlonak
    Junior Member
    • Apr 2007
    • 44

    Springfield GI accuracy modifications

    ....
    Last edited by shlonak; 03-07-2009, 11:44 PM.
  • #2
    slick_711
    Veteran Member
    • Feb 2006
    • 4400

    If #5 means replace the trigger itself have at, but don't have them do a redundant trigger job after #1, the 4.5# pull is what you want. Also maybe consider having them fit an extended thumb safety if you like the feel of that, it's a little easier to engage/disengage quickly. And then find yourself a pair of sexy grips and you should be good to go. Accuracy is inherent more to the shooter than the pistol though, so upgrade away till you're happy with the pistol, but don't forget to save some money to make sure you're happy with the level of your shooting.
    Last edited by slick_711; 05-26-2007, 1:11 AM.

    Comment

    • #3
      slick_711
      Veteran Member
      • Feb 2006
      • 4400

      In my honest opinion then, #2 #1 and maybe #3 priority wise, the rest is cosmetic/aesthetic/low priority. The stock bushing may be a decent fit, and I'd imagine #1 would work it over if it is not. The main issue with the GI pistols is the very low profile sights, so definitely go with #2, and consider #1.

      #3 if it concerns you and the bushing is loose will definitely affect you accuracy. Key issues in accuracy are your sight picture/consistency, trigger pull, and the barrel lockup. Not the slide/frame lockup, I always laugh when people push on a 1911 and comment on it's accuracy. The only issue in fitting is whether or not the barrel returns to the same place relative to the sights.

      #4&5 you can do yourself for a combined total of less than $50 if you purchase smart and do a little research. #6 is nice but not necessary, #7 is cosmetic/comfort, and with a file and a little 600 grit sandpaper you can get that stock grip safety to a very comfortable point.
      Last edited by slick_711; 05-26-2007, 1:44 AM.

      Comment

      • #4
        slick_711
        Veteran Member
        • Feb 2006
        • 4400



        It's no high dollar match pistol, but that was a 10 yard target, 100 rounds shooting 2 shot pairs from the holster, so that's not bad at all for defensive practice shooting (for my standards at least). The pistol is a SA Mil-spec, all the work done myself. So sending it off is the easiest, fastest, fanciest way to do it, but you have options. I've got ~$750 total into it including the pistol itself and it's a great shooter for my uses, and I shoot regularly (used to be multiple times a week but now I have 2 1911s and the 9mm ammo is cheaper so the other sees more use lately).

        Comment

        • #5
          brassburnz
          Veteran Member
          • Nov 2006
          • 3553



          Take a look at what they do at Clark Custom Guns. It will only increase the value of your pistol to have it worked on at Clark.

          Their website can be difficult to navigate, but take a look at what you get for the money. Springfield isn't going to guarantee you 2 1/2 inch groups at 50 yards.

          Randy
          NRA Life Member
          CRPA Life Member

          Comment

          • #6
            saki302
            Calguns Addict
            • Oct 2005
            • 7193

            Have someone knowledgeable take a close look at your gun- a lot of the accurizing may be totally unnecessary until you become an excellent shot.
            Most people wouldn't be able to tell the difference between a 6" vs. a 2" at 50 yard gun!

            The single biggest difference you will notice is a nice trigger job. Is the gun unreliable as it is? If not, I would do a trigger job (maybe have Kings or someone local do it- I have a smith in Glendora), and just go shoot the thing.

            -Dave

            Comment

            • #7
              gottarollwithit
              Member
              • Aug 2006
              • 461

              +1 on what Saki says.

              800 bucks is starting to approach some more serious custom territory.
              Might want to get some ideas here:


              The guys on that forum can do ANYTHING you want. You should really assess what exactly you want from your pistol. From there, decide on the mods you want. It sounds like you want "everything on it", with the exception of a new barrel and slide to frame tightening. The reality is, you probably don't need all of that and don't sound like you want to pay for it either...
              Another harsh reality is that if ya don't shoot often or when you eventually do you're already tired out, you're not going to really notice much of an accuracy difference between stock and modded.

              Btw, if you're heartset on going ahead with all of this, it's cheaper to sell your GI and buy a Baer or a nice Kimber.
              The dude abides...

              Comment

              Working...
              UA-8071174-1