So I have recently bought a Ruger SR9C, I took it to the range fired abut 200 rounds or so through it and in functioned perfectly not 1 problem for the record I used 100 rounds of remington 115 grain FMJs and 100 CCI blazer 128 grain or somthing like that with the aluminum casings, I know for sure the blazer had more powder, anyways I get the gun home and im kinda playing with it loading and unloaded the chamber to smooth things out, so then I go to put all the bullets away and I notice the bullet I was chambering and ejecting had actually been pushed down further into the shell casing when I put said round next to 1 fresh out of the box there was a noticable difference, now I know that over time chambering and ejecting the same round can cause this but I only did it maybe 10 times at most, so now that ive rambled on my question is was it the cheap CCI blazer? or was it because my recoil spring and other internals are still very new and crisp? Was it the gun or ammo or maybe even both?
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Whats the problem here?
Collapse
X
-
Whats the problem here?
Tags: None -
im guessing the aluminum case cant hold a crimp as well as a brass one.... -
The problem is YOU chambering and ejecting the same round over and over. There is no magic number that a round can be chambered and ejected before this happens. 10 times or 1 time...doesn't matter. Why are you "kinda playing" with live ammo anyway? Snap caps were made for this purpose.The question is not "How far?". The question is "Do you possess the constitution, the depth of faith, to go as far as is needed?". - Il Duce/Prisoner#6570534 from Boondock Saints
sigpicComment
-
No problems. Lock the thread. Move onComment
-
Wow SGT. Safety I didnt know I wasnt allowed to load live ammo into my own gun, maybe I should throw it at intruders instead. I asked your opinion not for you to be a dick. also FYI the gun is less than 2 weeks old I havent had a chance to get any snap caps.Comment
-
I've seen that before on rounds that fail to feed but only at the range......and with brass cases.
As a side note I have a rule that I never chamber a live round at my residence or in my garage, only at the range. If I do any break in work or trigger practice I buy the snap cap and will only chamber that at home. Of course in the case of home defense it would be another story.... RegardsComment
-
It's completely normal. You should rotate your HD ammo when you clear your HD to take it to the range. Either that or just shoot it and replace.WTS all BNIB: Colt S70 Repro, HK45c, Gen4 G19Comment
-
i have the exact opposite philosophy, i ALWAYS run one in the pipe at home. i was always taught that a firearm is ALWAYS loaded, even if it isnt. so why not have it be loaded? condition 1 is the quickest way to defend yourself, and there is never a doubt as to whether or not my hd weapon is loaded. it is ALWAYS loaded, and ALWAYS ready to fire. so i ALWAYS must clear it before attempting maintenance, this eliminates the negligent discharges associated with "never having a loaded gun in the house unless i need it..."I've seen that before on rounds that fail to feed but only at the range......and with brass cases.
As a side note I have a rule that I never chamber a live round at my residence or in my garage, only at the range. If I do any break in work or trigger practice I buy the snap cap and will only chamber that at home. Of course in the case of home defense it would be another story.... Regards
Comment
-
-
Sgt. Safety...oh please.
Unbunch the panties sir.
First off, I never said don't load live ammo in your gun. You pointed out that you were chambering and ejecting 1 particular round multiple times, then asked why the bullet set in a bit deeper than the other rounds in the box assuming it was the ammo or your gun. The reason for the bullet seating deeper is YOU chambering and ejecting the same round over and over.
Second, where am I being a dick? Perhaps because I was pointing out it's You, and not the gun or ammo? New gun or old gun, if you load the same round over and over the bullet will seat in deeper than normal.
You didn't say you were loading it up for HD purposes. You said "I get the gun home and im kinda playing with it loading and unloaded the chamber to smooth things out". Snap caps are a better alternative to live ammo, but if you wanna do it with live ammo then that's your choice. I have my HD gun loaded with 1 in the pipe, but I don't chamber, eject, and rechamber that round over and over.
Don't get all angry because someone points out "kinda playing" with live ammo involved is not such a good idea.The question is not "How far?". The question is "Do you possess the constitution, the depth of faith, to go as far as is needed?". - Il Duce/Prisoner#6570534 from Boondock Saints
sigpicComment
-
ok, thanks.
Comment
-
You weren't being a dick. You hit him with real world fact and he couldn't take it. There are many here whom can't handle reality splashed in their face, even when they ask for it.
Second, where am I being a dick? Perhaps because I was pointing out it's You, and not the gun or ammo? New gun or old gun, if you load the same round over and over the bullet will seat in deeper than normal.
Comment
-
Frank
One rifle, one planet, Holland's 375

Life Member NRA, CRPA and SAFComment
Calguns.net Statistics
Collapse
Topics: 1,870,961
Posts: 25,177,925
Members: 358,862
Active Members: 5,392
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 33704 users online. 132 members and 33572 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment