sig pro 2022

[gogojwc]

i just got a sig pro and it jamed up on me about 20 times i shot 170 rounds out of it 3 diffrent brands of ammo what could be the problem does the gun need to go back

[MT1]

What kind of jam - failure to feed or to eject?

[gogojwc]

more on the loading but it also did it on the eject

[nazgulnarsil]

i got failures for the first 50 rounds with umc. switched to winchester white box and only got 1 jam in the next 100. ran flawlessly after that. try a hotter ammo to break it in and be sure to CLEAN. mine felt gritty until i cleaned it.

[gogojwc]

ok i will try that thank you for reply

[MT1]

Mine has been flawless - no failures of any kind. And although I usually detail strip all my new guns, this one I left alone because the grease looked to be clean and I planned on it being my "beater" gun.

What exactly happens - does the round strip from the magazine but jam on the feed ramp? Does it fail to strip from the magazine? Only partially go into battery?

[toneman]

Sig recommends 500 rounds to break in for SP 2022 model http://lundestudio.com/SigProFAQ/X/2.htmll,
usually SP 2022 likes hotter loads,
So you might have a ETE or FTF on PMC 115gr.
If you have a same problem after your 500 rounds
contact Mark Hanson at the customer service
Mark Hanson
Customer Service Rep
Sig Sauer, Inc.
18 Industrial Drive
Exeter, NH 03833
(603) 418-8102 CS Direct Line
(603) 772-4795 - Fax
mark.hanson@sigsauer.com

It's direct number for one of customer service rep,
this way you don't have to hold on the phone for a long time.
usually they send prepaid postage to you & you ship it out to them,
& takes 3 to 4 weeks.

Good luck.

[gorenut]

Clean it, rack the slide a buncha times before going to the range. Despite the 500 rounds break-in time recommended, mine worked perfect right out the gates. I say if next range trip, you're not getting improved results, contact Sig.

[gunwurkz]

Contact Sig after 500 rounds and see how it goes

[zman]

i just got a sig pro and it jamed up on me about 20 times i shot 170 rounds out of it 3 diffrent brands of ammo what could be the problem does the gun need to go back

Where did you get yours? Turner's special?

Sig recommends 500 rounds to break in for SP 2022 model http://lundestudio.com/SigProFAQ/X/2.htmll,
usually SP 2022 likes hotter loads,
So you might have a ETE or FTF on PMC 115gr.
If you have a same problem after your 500 rounds
contact Mark Hanson at the customer service
Mark Hanson
Customer Service Rep
Sig Sauer, Inc.
18 Industrial Drive
Exeter, NH 03833
(603) 418-8102 CS Direct Line
(603) 772-4795 - Fax
mark.hanson@sigsauer.com

It's direct number for one of customer service rep,
this way you don't have to hold on the phone for a long time.
usually they send prepaid postage to you & you ship it out to them,
& takes 3 to 4 weeks.

Good luck.

Good info. Tagged!

[SIGman Freud]

I'm wondering if the "new" production models of the 2022 are going to have this annoying break-in period. I alnost bought this pistol last Sat., but ultimately went for the CZ P01 brcause of the good price point, excellent ergonomics, and most importantly, it's readiness to hit paper right out of the box.

That said, I would still be interested in getting a Sig polymer pistol at a reasonable price and reliability.

[schenkelini]

Mine did not have the problem, so I really think he either didn't get a "good" one, or he didn't clean and lube his gun before using. The packing grease is not meant for shooting, just corrosion protection.

[pkc168]

Try a hotter load like WWB or Fiocchi, mine ran flawless with it. But would have problems with Remington Yellow or Green box.