Glockworx

[caliboy1321]

http://www.calguns.net/calgunforum/showthread.php?t=55554

The thread above was closed but i wanted to add that i have one of these triggers and they are amazing i would highly suggest them. No play and light pull even makes me look like an acurate shooter.

If you want to give mine a try pm me and you are welcome to do so.

[PLINK]

I ended up getting one of the Comp III (competition version) Glockworx trigger kit. The best way I heard this described is a light single stage trigger with a very little creep.

My thoughts:

-Glockworx as a company was very professional. Answered all my questions via email in a timely manner and shipped the kit quickly.

-The overall kit is very nice.

-Clearly marked packaging is very helpful.

-Installation is very easy for someone that has removed the FCG
before. Instructions would be helpful for those who have never done it
before.

-Complete drop in. You can go back to your stock set up anytime.

-Metal parts are polished nicely

-Trigger pull is very nice for a Glock trigger. It is very light
with the Wolff reduced power spring. I am going to start with
the Wolff standard power spring. Seems to have a stronger reset with
this spring. I even messed with the stock striker spring a little and
the trigger pull seems to get even heavier. There seems to be a little
build up (creep) before the break when pulling the trigger very slow. This is
not much different for the stock trigger. The reset and over travel
is as advertised. The over travel set screw us nicely done.

-The trigger stays at the trigger reset position.

-Trigger safety is modified and does work.

-I had no failures after a 100 round fired.

-Does not use factory 3.5 connector. Looks to me like the LWD 3.5 connector.

-Stating the obvious - Finger off the trigger until pointing at your target is a must rule to follow with this system. This is a known rule for shooting but it
can not be broken with this set up. With no pretravel and a light
striker spring, the trigger is very light.

-I personally would not use this kit for anything but target or competition shooting. Maybe the tactical version would be better for personal protection or carry use. This is just a guess though because I have not tried that version.

Anyway, this is my first impression of the kit. I don't have anything
to measure it up against other than the stock G35 FCG that comes with the stock 3.5lb connector. It is definitely a huge improvement over stock.

Trigger position before firing:



Trigger position after:



Forgot to add gun specs for those that want to know.

G35
Glockworx Comp III trigger
Hienie Slant black rear sight
Dawson .105 fiber optic front sight
Dawson heavy magwell
barrel - stock

Adding soon:

Trugrip tape
THE extended guide rod
THE extended mag release
ISMI 15lb recoil spring.

Rig:

Ghost holster
CR Speed belt and mag pouches