Unconfigured Ad Widget

**halifax** · 06-10-2010, 7:32 PM

Yes. Reset on my 245 is ~ 1/8".

**sirgiles** · 06-10-2010, 9:32 PM

it works.

**Dhena81** · 06-11-2010, 1:31 AM

Do you think its worth 100 bucks though.

**shoupdawg** · 06-11-2010, 1:42 AM

You can do it yourself. I did. Get the kit from OMB Express and PM me if you have questions.

**Dhena81** · 06-11-2010, 1:46 AM

Originally posted by shoupdawg

You can do it yourself. I did. Get the kit from OMB Express and PM me if you have questions.

Thanks man

**kduly** · 06-11-2010, 9:44 AM

Here's the video:

404 Not Found

http://www.customizedcreationz.com/videos.html

**Black Majik** · 06-11-2010, 10:54 AM

Besides the short reset, did you know any difference in the actual pull? Did it become more/less gritty?

Thanks

**wu_dot_com** · 06-11-2010, 11:19 AM

Originally posted by Dhena81

Has anyone had any experience with the short reset trigger job done by Sig. Can you really tell a difference when rapid shooting or when just plinking.

if you have any questions about the installation, just let me know. im in LA area too. i can show you how its done. if you want to try it out, just let me know too.

**wu_dot_com** · 06-11-2010, 11:19 AM

Originally posted by Dhena81

Thanks man

the wait from OMB for the SRT sear is about 3-4 weeks. its on back order.

**wu_dot_com** · 06-11-2010, 11:22 AM

Originally posted by Black Majik

Besides the short reset, did you know any difference in the actual pull? Did it become more/less gritty?

Thanks

no, the SRT does not lighten the trigger pull, it also does not eliminate the creep or over travel.

if you want the trigger to be less gritty, you will have to polish the sear/hammer, hammer/ sear/ safety lever to frame, trigger bar to sear, and trigger bar to trigger interfaces.

**Black Majik** · 06-11-2010, 11:27 AM

Originally posted by wu_dot_com

no, the SRT does not lighten the trigger pull, it also does not eliminate the creep or over travel.

if you want the trigger to be less gritty, you will have to polish the sear/hammer, hammer/ sear/ safety lever to frame, trigger bar to sear, and trigger bar to trigger interfaces.

Thanks, what parts do the SRT kit replace?

**golfrj** · 06-11-2010, 11:32 AM

Originally posted by Black Majik

Thanks, what parts do the SRT kit replace?

The Sear and the firing pin safety lift lever...

**wu_dot_com** · 06-11-2010, 11:46 AM

Originally posted by golfrj

The Sear and the firing pin safety lift lever...

the stock setup for the sig have the trigger bar actuate the safety lever, then the safety lever actuate the sear.

the SRT setup have the trigger directly actuating the sear, and the sear actuating the safety lever. the point contact where the safety lever interface w/ the trigger bar is higher for stock than the SRT. that interface point is where the 60% trigger reset reduction comes from.