Unconfigured Ad Widget

Collapse

Magazine Loading Problems/XD 45 Tactical.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • II ADAM II
    Junior Member
    • May 2010
    • 15

    Magazine Loading Problems/XD 45 Tactical.

    So Ive recently bought the XD45 Tactical, and when I put in empty mags or mags loaded with only 7 rounds, it slides in, locks up and ejects great and smooth, but when I load 8 or 9 (and is extremely more difficult with a full 10) rounds, I have to slam it in HARD, and if I want to eject the mag without firing anything (so it still has 10 rounds in it), it seems like the mag release gets stuck and is really stubborn to press. Anyone have any experience with this problem before? Ive tried light oil on the mag relase, on the mag, re-applied to the slide and everything and it still has this problem. Do i have a faulty gun, or does it need to be broken in some more? Thanks for your tim ein reading and more so for any help.
    Brute Force-If it ain't workin', you ain't using enough.
  • #2
    Carsgunsandchics
    Veteran Member
    • Mar 2009
    • 3537

    I'd say that it needs more breaking in. Sounds like that mag spring is quite stiff and not compressing smoothly. Possibly take the mag apart and check for a blockage or dirt etc... You might have to load up the mag to full capacity and let it sit for a while.
    Originally posted by fighterpilot562
    I am more of a sucker than a blower...

    Comment

    • #3
      cmace22
      Veteran Member
      • Jan 2008
      • 2717

      It's normal. Do a search, its been talked about A LOT.

      Comment

      • #4
        cineski
        Calguns Addict
        • Nov 2007
        • 6205

        Normal. Slam that mag home. Loading up a magazine and letting it sit won't do anything to the springs. Using them will. It's the contraction and expansion of springs that causes them to wear.

        Comment

        • #5
          SVRider
          Senior Member
          • Apr 2007
          • 1914

          Trying to drop a fully loaded magazine with the slide closed is hard because the magazine spring is pushing the rounds up against the bottom of the slide, which in turn tries to push the magazine down out of the well (thus putting tension on the mag lock). I am assuming if you do this with the slide locked back, there is no problem.

          Next time, push up on the bottom of the mag when you are trying to drop a loaded one. Relieving the spring pressure off of the mag release should make it easily drop out.

          Everything you are describing is completely normal....sounds like you were just not expecting it.

          HTH!
          FOR SALE:

          Check back later

          Comment

          • #6
            Californio
            CGN/CGSSA Contributor - Lifetime
            CGN Contributor - Lifetime
            • Dec 2006
            • 4169

            I like my fingers and only load 9 max, then slam it home.
            "The California matrix of gun control laws is among the harshest in the nation and are filled with criminal law traps for people of common intelligence who desire to obey the law." - U.S. District Judge Roger T. Benitez

            Comment

            • #7
              II ADAM II
              Junior Member
              • May 2010
              • 15

              SVRider. I do push up on the mag when its loaded full and it is easier (forgot to mention that). I took the mags apart this morning but nothing other than the smell and feel of new mag parts was to be seen. So it is normal, I am relieved. It's only a minor nuisance to me, i'm just spoiled because I was so used to my 92fs before where that mag just fell like a brick when you released it, regardless of load amount. I have both my mags loaded with dummies to wear them out while its locked up. Thank yall so much for the feedback. Yall have a great day/night!
              Brute Force-If it ain't workin', you ain't using enough.

              Comment

              • #8
                ElkHunterSL
                Member
                • May 2010
                • 282

                Yep, normal. Mine does that too. At the Raahauges show Todd Jarret gave a tip during his handgun demo about never filling a clip more than 70-80% of capacity. It wears out the springs quicker when keeping ten rounds in a clip and does one really need 10 rounds to take down a danger when one should be able to do it with one or two.

                I immediately took 3 rounds out of my magazine when I got home and it works smooth now.
                sigpic Steve from So. Cal.

                Comment

                • #9
                  08duramax
                  Member
                  • Jul 2009
                  • 441

                  Isn't the spring the same for the 10 rd mags and the 13 rd mags? I thought only the magazine body was different. If so you are already running the spring at 3 less than full capacity so according to your theory you should be ok.

                  Plus they are magazines not clips b
                  "The democracy will cease to exist when you take away from those who are willing to work and give to those who are not."
                  Thomas Jefferson

                  Comment

                  • #10
                    ElkHunterSL
                    Member
                    • May 2010
                    • 282

                    08duramax - Yes, magazines not clips. My bad.

                    Not sure the diff between 10 and 13.

                    I just know that trying to put #9 and #10 takes a herculean effort, so if it was the same spring, I couldn't imagine #11-#13.
                    sigpic Steve from So. Cal.

                    Comment

                    • #11
                      FeuerFrei
                      Calguns Addict
                      • Aug 2008
                      • 7455

                      Originally posted by SVRider
                      Trying to drop a fully loaded magazine with the slide closed is hard because the magazine spring is pushing the rounds up against the bottom of the slide, which in turn tries to push the magazine down out of the well (thus putting tension on the mag lock). I am assuming if you do this with the slide locked back, there is no problem.

                      Next time, push up on the bottom of the mag when you are trying to drop a loaded one. Relieving the spring pressure off of the mag release should make it easily drop out.

                      Everything you are describing is completely normal....sounds like you were just not expecting it.

                      HTH!
                      What he said.

                      Comment

                      • #12
                        mif_slim
                        I need a LIFE!!
                        • Apr 2008
                        • 10089

                        oad your mag wit 10 rounds and let it sit for a few days...your mag will break in.
                        Originally posted by Gottmituns
                        It's not protecting the rights of the 1%, it's IMPOSING new laws because of the 1%.

                        Comment

                        Working...
                        UA-8071174-1