Here's the first range report for my G20L that I showed off here: http://www.calguns.net/calgunforum/s...d.php?t=296288
Range report:
I put 200rds of 180gr WNFMJ BVAC and 50rds of 165gr JHP DoubleTap through it on Saturday with one failure to feed. Everyone else who shot it (another 200rds of the WNFMJ BVAC) had multiple FTFeed and FTEject. Not sure about what they were doing wrong but even veteran shooters couldn't get it to run right but I did. One thing I noticed was they were knocking the extended slide release UP since they weren't used to it versus the standard Glock slide release and would accidentally lock the slide back.
Muzzle flip is nearly non-existent with either loading however there is a difference between the two with the DT being noticeably heavier. I do wish that Lone Wolf hadn't removed material from the top of the slide to make it work with ported barrels as the extra weight up front would have made for an even easier shooting gun (trading recoil for muzzle flip) but it's more of a "want" than a "need" for this setup. The 22lb recoil spring did well however if I routinely experience FTFeed, I may swap out the spring for a 20lb one instead. The fiber optic Warren Tactical Sevigny carry sights I installed are dead nuts accurate and with a little adjustment, I was hitting 12"x12" plate steel at 95yds with relative consistency. The longer sight radius certainly didn't hurt in this department.
For being a 10mm, this is a very soft shooting gun. As far as muzzle flip is concerned, it has less than my 19 but more than my 21. With time, I have a feeling my 21 slide is going to be a paperweight as the ballistic advantage of the 10mm caliber relative to .45ACP far outweighs the marginally increased difficulty in follow-up shot placement. I will run a bunch more rounds through it before I go tromping through the hills of Missouri with it but we're off to a good start.
Range report:
I put 200rds of 180gr WNFMJ BVAC and 50rds of 165gr JHP DoubleTap through it on Saturday with one failure to feed. Everyone else who shot it (another 200rds of the WNFMJ BVAC) had multiple FTFeed and FTEject. Not sure about what they were doing wrong but even veteran shooters couldn't get it to run right but I did. One thing I noticed was they were knocking the extended slide release UP since they weren't used to it versus the standard Glock slide release and would accidentally lock the slide back.
Muzzle flip is nearly non-existent with either loading however there is a difference between the two with the DT being noticeably heavier. I do wish that Lone Wolf hadn't removed material from the top of the slide to make it work with ported barrels as the extra weight up front would have made for an even easier shooting gun (trading recoil for muzzle flip) but it's more of a "want" than a "need" for this setup. The 22lb recoil spring did well however if I routinely experience FTFeed, I may swap out the spring for a 20lb one instead. The fiber optic Warren Tactical Sevigny carry sights I installed are dead nuts accurate and with a little adjustment, I was hitting 12"x12" plate steel at 95yds with relative consistency. The longer sight radius certainly didn't hurt in this department.
For being a 10mm, this is a very soft shooting gun. As far as muzzle flip is concerned, it has less than my 19 but more than my 21. With time, I have a feeling my 21 slide is going to be a paperweight as the ballistic advantage of the 10mm caliber relative to .45ACP far outweighs the marginally increased difficulty in follow-up shot placement. I will run a bunch more rounds through it before I go tromping through the hills of Missouri with it but we're off to a good start.


Comment