Unconfigured Ad Widget

Collapse

1911 Spring question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Barbarossa
    Veteran Member
    • Aug 2008
    • 4436

    1911 Spring question

    I've been advised not to shoot commercial loads out my 1911, as it's been setup for light target loads for bulls-eye competition.

    As I don't yet have space to reload I'm stuck with commercial ammunition.

    I'm wondering what all I would need to change to shoot commercial loads. I assume it is just a stiffer springs (what rate?), or is there something else I may be overlooking?

    I'm also looking at upgrading the grips to these. Any feed back?
    Looking for a 3" Magnum 870 $200-$250ish
  • #2
    Daniel Hunter
    Member
    • Jan 2009
    • 165

    Probably just the recoil spring.

    I've had good luck with 18lb. springs in my 1911's.

    Comment

    • #3
      wamphyri13
      CGN Contributor
      • Apr 2008
      • 2759

      18 - 19 lb recoil and same for mainspring should do the trick. That's most factory spring weights. You can play around with various combos from 18 - 23 lbs to find what you like, but those will work for standard 230gr FMJ.
      Ryan
      The following statement is true.
      The preceding statement was false.

      Comment

      • #4
        Barbarossa
        Veteran Member
        • Aug 2008
        • 4436

        Recoil Spring?
        Main Spring?

        Sry I'm new to 1911s. Which is around the guide rod? Difficulty for swapping the other?
        Last edited by Barbarossa; 02-12-2010, 3:22 PM.
        Looking for a 3" Magnum 870 $200-$250ish

        Comment

        • #5
          wamphyri13
          CGN Contributor
          • Apr 2008
          • 2759

          As far as grips, I wouldn't consider those an upgrade. That price is pretty high too. Much cheaper on ebay. I might have an extra slightly used set around. PM me, kick in a few bucks for shipping and they're yours. At least you can try them for cheap, and if you like them, order a new set from ebay. What kind of 1911 and what color?
          Ryan
          The following statement is true.
          The preceding statement was false.

          Comment

          • #6
            wamphyri13
            CGN Contributor
            • Apr 2008
            • 2759

            Recoil spring is the one in the slide, and the mainspring is the one in the mainspring housing. The checkered part on the back that make up the grip.
            The following statement is true.
            The preceding statement was false.

            Comment

            • #7
              Barbarossa
              Veteran Member
              • Aug 2008
              • 4436

              Gotcha.

              So using this Diagram. we're looking at #22 main spring. #32 Recoil spring.

              Pistol is below: (you can see why I'm looking at wrap around's)
              Last edited by Barbarossa; 02-12-2010, 3:36 PM.
              Looking for a 3" Magnum 870 $200-$250ish

              Comment

              • #8
                cmichini
                Senior Member
                • Oct 2008
                • 1739

                No expert here but here goes with SOME info:

                You're right. Recoil spring is the sping that lives in the slide under the barrel it is held in alignment by the recoil spring guide and held in place with the recoil spring plug. That spring should be totally easy to replace as you normally remove it during a basic field stripping.

                Mainspring is housed in the mainspring housing, which is located at the rear of the grip, near the base of the magazine.

                The mainspring replacement will require more effort since you need to break down the pistol enough to remove the mainspring housing, disassemble that, replace the spring and re-assemble it all.

                If you're not familiar enough I bet there's some CG'er in your neighborhood that would be happy to help you out. I am in Alameda county too (near Oakland) and I am perfectly willing to help (had a springfield milspec before that I completely disassembled once), but my guess is there are other 1911 gurus locally that will provide true guidance and education. I fear that I'd be the blind leading the blind.

                Good luck. If you don't hear from others, feel free to PM me and we can talk to get her ready to tackle std. loads.

                Cheers
                NRA Certified Rifle Instructor
                NRA Certified Range Safety Officer

                Comment

                • #9
                  golfrj
                  Senior Member
                  • Jul 2007
                  • 1623

                  Remember every action has an opposing reaction, I would not go over 18# on a 1911 as when the spring Unloads it will needlessly batter the gun..

                  Most 1911 competition shooters go to about 16# with a modified firing pin holder (less angle) But you can go to 1911 forums for tons of info, those guys have it down to a science (You are gonna have Lots of Fun learnin your 1911).. Have Fun, Jim

                  Comment

                  • #10
                    wamphyri13
                    CGN Contributor
                    • Apr 2008
                    • 2759

                    You got it. Look at YouTube to familiarize your self with taking it apart and reassembling it. It's not as bad as you think. All you need are some decent tools like a good set of punches, brass hammer, (comes with punch set) a rubber band, and basic tools. If you don't have one already, get a Midway and a Brownells catalog. Everything you need is in there. Plus the Midway catalog comes with an exploded diagram of the 1911, (not 1922, I know, it was a typo, just giving you some grief ) very handy for reassembly.
                    Ryan
                    The following statement is true.
                    The preceding statement was false.

                    Comment

                    • #11
                      buffybuster
                      Veteran Member
                      • Oct 2005
                      • 2615

                      Originally posted by Barbarossa
                      I've been advised not to shoot commercial loads out my 1911, as it's been setup for light target loads for bulls-eye competition.

                      As I don't yet have space to reload I'm stuck with commercial ammunition.

                      I'm wondering what all I would need to change to shoot commercial loads. I assume it is just a stiffer springs (what rate?), or is there something else I may be overlooking?

                      I'm also looking at upgrading the grips to these. Any feed back?
                      Depends.

                      If whoever set the pistol up, just re-sprung it with a lighter recoil and mainspring, then it would just be a simple changing of springs with a standard power recoil spring (16# is standard but 18# usually works well) and standard power mainspring (23# is standard).

                      If however, the slide had been lightened with internal cuts, then re-springing would not be the appropriate. The mass of the slide and barrel as an assembly have more to do with keeping the action locked than the spring rate. If the slide has been lightened, while you can re-spring it and shoot standard loads, it will wear at an accelerated rate and you may experience reliability issues since the action/slide is moving at a faster rate than it was originally designed.
                      Luck favors the prepared.

                      The original battle plan did not survive initial contact with the enemy.

                      "The things that will destroy America are prosperity at any price, peace at any price, safety first instead of duty first, the love of soft living and the get rich quick theory of life." -Theodore Roosevelt

                      Comment

                      • #12
                        Barbarossa
                        Veteran Member
                        • Aug 2008
                        • 4436

                        Yup got a midway sitting here on my desk. (should have seen the secretary's face )

                        Thanks for the input guys.

                        I'm trying to visualize what effect the main spring has on recoil, can someone talk me through it?
                        Looking for a 3" Magnum 870 $200-$250ish

                        Comment

                        • #13
                          buffybuster
                          Veteran Member
                          • Oct 2005
                          • 2615

                          Originally posted by Barbarossa
                          Yup got a midway sitting here on my desk. (should have seen the secretary's face )

                          Thanks for the input guys.

                          I'm trying to visualize what effect the main spring has on recoil, can someone talk me through it?
                          When the slide comes back in recoil, the FP retaining plate has a radius which begins pushing the hammer back. This radius and the resistance of pushing the hammer back (compressing the mainspring) play an important part in controlling the slide velocity. The radius of the FP retainer is a relatively fixed item (though originally is was much smaller than it is now and you can buy un-radiused ones that you can experiment with) and the mainspring weight can be changed to increase the resistance of the hammer being pushed back by the slide.
                          Luck favors the prepared.

                          The original battle plan did not survive initial contact with the enemy.

                          "The things that will destroy America are prosperity at any price, peace at any price, safety first instead of duty first, the love of soft living and the get rich quick theory of life." -Theodore Roosevelt

                          Comment

                          Working...
                          UA-8071174-1