Unconfigured Ad Widget

Collapse

Maintenance

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • clickbang
    Member
    • Dec 2009
    • 141

    Maintenance

    I plan on shooting my SIG P229 at the range while they are processing my DROS. My question is how often should I clean this gun? Do I need to strip and clean it every time I use it? If I cant take it home until my background check it complete, that might be a problem.
  • #2
    Full Clip
    I need a LIFE!!
    • Dec 2006
    • 10266

    Sorry, I'm confused.
    Is that legal? (Seriously. I don't know.)

    Comment

    • #3
      Black Majik
      Calguns Addict
      • Oct 2005
      • 9695

      It depends per person. Most importantly, make sure the gun is ALWAYS lubed with grease on the rails. You can go without cleaning , just make sure every time that gun is fired it is well lubed.

      It's good practice to field strip, clean and lube after every range session. However you can go much longer without cleaning. If you don't clean every time, just make sure you apply fresh grease on the rails and a drop of oil on the lug, barrel and guide rod. Takes 30 seconds.

      Have fun.

      Comment

      • #4
        Dadio
        Junior Member
        • Aug 2009
        • 50

        They let you shoot it before you pass backround? How does that work lol.

        Comment

        • #5
          civilsnake
          Senior Member
          • Jul 2008
          • 2261

          Originally posted by suckmynick
          I plan on shooting my SIG P229 at the range while they are processing my DROS. My question is how often should I clean this gun? Do I need to strip and clean it every time I use it? If I cant take it home until my background check it complete, that might be a problem.
          You could probably stand to clean all of the oil off of it if it's a new gun and then relube it, but really you can fire a thousand rounds through it over the week and not worry about cleaning it. I would just take some simple items with you when you go to shoot, like a rag and cleaning patches, oil and grease for lube as you see fit.

          It's a SIG. It's going to keep shooting until you try to MAKE IT stop. Even then it will probably keep shooting.
          Then another horse PONY came out, a fiery red one. Its rider was given power to take peace from the earth and to make men slay each other. To him was given a huge sword. My kinda guy.

          Comment

          • #6
            Juice5610
            Senior Member
            • Feb 2009
            • 1558

            Originally posted by Dadio
            They let you shoot it before you pass backround? How does that work lol.
            Background check is performed within minutes/hours, the 10 days are what they call a cooling off period in case you plan on commiting an act of violence based on a current emotion

            Comment

            • #7
              clickbang
              Member
              • Dec 2009
              • 141

              Originally posted by Full Clip
              Sorry, I'm confused.
              Is that legal? (Seriously. I don't know.)
              At the store that I purchased it at, they let you shoot it at the range before the 10 day period is over. You have to give it back to them before you leave.

              Comment

              • #8
                MidnightSon117
                Senior Member
                • Jan 2006
                • 551

                I think it's not only legal, but necessary. Especially if you bought used, and you want to make sure as soon as possible that the gun functions as expected.

                Comment

                • #9
                  joefrank64k
                  @ the Dark End of the Bar
                  CGN Contributor - Lifetime
                  • Mar 2009
                  • 10124

                  When you ask 10 gun people how to clean a gun, you'll get 12 different answers!

                  Modern handguns, shooting modern ammo, need very little in the way of maintenance. Your manual will detail what they recommend...as an example, FN recommends cleaning my Five Seven every 500 rounds.

                  And it's a SIG...that gun will function each time, every time with virtually zero maintenance as long as you use quality ammo...I use Breakfree lightly on all moving surfaces and to clean the bore, along with a dental pick and cotton swabs to get out any gunk from the nooks and crannies.

                  Just enjoy the heck out of your new gun!
                  You will never, in your life, have a chance like this again.
                  If I were you, I would not pass this up. I would not let this go by...this is rare.
                  Come on...what harm??

                  joefrank64k 251/251 100% iTrader?

                  Comment

                  • #10
                    clickbang
                    Member
                    • Dec 2009
                    • 141

                    Originally posted by joefrank64k
                    When you ask 10 gun people how to clean a gun, you'll get 12 different answers!

                    Modern handguns, shooting modern ammo, need very little in the way of maintenance. Your manual will detail what they recommend...as an example, FN recommends cleaning my Five Seven every 500 rounds.

                    And it's a SIG...that gun will function each time, every time with virtually zero maintenance as long as you use quality ammo...I use Breakfree lightly on all moving surfaces and to clean the bore, along with a dental pick and cotton swabs to get out any gunk from the nooks and crannies.

                    Just enjoy the heck out of your new gun!
                    Thanks a lot. Cant wait to take it home.

                    Comment

                    • #11
                      RedFord150
                      Calguns Addict
                      • Oct 2009
                      • 5665

                      Originally posted by joefrank64k
                      When you ask 10 gun people how to clean a gun, you'll get 12 different answers!

                      ...I use Breakfree lightly on all moving surfaces and to clean the bore...

                      This is very close to my practice. I use Shooter's Choice on the bore, Breakfree lightly on everything else.
                      What kind of grease would most people use on the slide rails?
                      God Did Not Create All Men Equal, Colonel Colt Did.

                      Comment

                      • #12
                        thefurball
                        Senior Member
                        • Dec 2006
                        • 610

                        A Sig?

                        If it is new, run a swab down the barrel and make certain the rails are greased.

                        Other than that... Dude - its a Sig.

                        It, like the Energizer Bunny will simply keep running and running and running.

                        Every few hundred/thousand rounds wipe away the bigger chunks and give it a nice oil rubdown.

                        Just make sure the rails stay happily greased.

                        Comment

                        • #13
                          HCz
                          Veteran Member
                          • Jun 2008
                          • 3295

                          I've shot 5000 rounds through my CZ 75B without cleaning until I broke down and cleaned it. SIG probably will do the same. Of course, I did lube the gun.

                          If you shoot regularly, (once a week) then just lubing it and cleaning it once a month should be ok. But if you are not shooting it for an extended period of time(I usually assume 1 month) than cleaning it would be recommended.

                          Comment

                          • #14
                            slik556
                            Senior Member
                            • Jan 2009
                            • 1192

                            Originally posted by RedFord150
                            This is very close to my practice. I use Shooter's Choice on the bore, Breakfree lightly on everything else.
                            What kind of grease would most people use on the slide rails?
                            I gave Slid Glide a try and it seems to work very well, stays where you put it and smooths and quiets the action. The dark parts of the frame and slide on my sigs still look like the day I got them even now that the guns are well used...
                            Here is a link:

                            Give it a try I think you will like the results
                            Last edited by slik556; 12-22-2009, 11:16 AM.
                            sigpic
                            IF THE BRADY BUNCH WAS AROUND
                            WHEN CAIN KILLED ABEL,
                            THERE WOULD BE A 10DAY
                            WAITING PERIOD ON ROCKS

                            Comment

                            • #15
                              razr
                              Senior Member
                              • Mar 2008
                              • 1415

                              Dont clean your gun like you're gonna eat with it.
                              Don't take refuge in the false security of consensus.
                              What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.
                              Nothing worse than an overrated F*** and an underrated S***
                              iF it'S nOt an aCt of goD, iT's a ConSpirAcy. If it can be measured, it can be optimized.
                              "What can be asserted without evidence can be dismissed without evidence." Chris Hitchens

                              Comment

                              Working...
                              UA-8071174-1