need to get my HSC!

[2wheelryder88]

so i just came across a ok deal on a xd40 and need to get my HSC so i can do the transfer. im in rancho cucamonga anyone know who administers the handgun safety test? or can i do it at any gun dealer because theres a bass pro shop down the street, and turners and the rancho magnum range arent far either

[Nynvolt]

You can get it at turners for sure. Not sure about the other places but usualy if they sell guns they also have the test.

Good luck.

[2wheelryder88]

also what are they looking for with the "safe handeling demo"

[Nynvolt]

They did not ask me to demo it, I suppose it's up to the person behind the counter to determin while you handle the gun. As in watching you to see if your pointing it or mishandling it I really don't know. I would suggest you just use common sense and you will be ok.

[2wheelryder88]

They did not ask me to demo it, I suppose it's up to the person behind the counter to determin while you handle the gun. As in watching you to see if your pointing it or mishandling it I really don't know. I would suggest you just use common sense and you will be ok.

cool thanx for the input shortly ill have a xd40

[bobnfloyd]

For the safe handling demonstration.

1) Point the gun in a safe direction (with finger off the trigger)
2) Take off a trigger lock
3) Drop the magazine
4) Lock the slide back
5) Visually (and physically) check that there is no round in the chamber or a magazine in the gun.
6) Allow the slide to move forward
7) Re-apply the trigger lock

I believe they also make you do it with a checked dummy round for loading a single dummy round into the gun and being able to load the gun.

1) Point the gun in a safe direction (with finger off the trigger)
2) Lock the slide back
3) Put the dummy round in the magazine
4) Put magazine in the gun
5) Release the slide to strip the round into the chamber
6) Pull the slide back to visually inspect that a round is in the chamber.
7) Then the steps above to unload the gun.

You will have to do this for every pistol you buy and sign a letter saying that you've done this procedure.

[forgiven]

^^^pretty easy as they walk you through it.

[JimmyW]

go to magnum range for the test.

[Nynvolt]

Maybe they forgot to have me do that? Don't want to get anyone in trouble but they didn't have me do any of that.

[2wheelryder88]

ok cool. i can handle that

[MrBrent]

Turners in Chino Hills is where I got mine. Very easy to pass.They have a study guide you can purchase for less than a buck if I remember correctly.

[waitwha?]

they never asked me to do any of the demonstration stuff either

[dg29]

The closest place to you would be Bass Pro or the new (second location) Ammo Bros by the 10 & 15 near Scandia. Test test is a minor $25.00 speed bump, just don't start waving the handgun around while holdin it at an angle like a gangsta
Seriously, enjoy your new XD,
dg

[2wheelryder88]

The closest place to you would be Bass Pro or the new (second location) Ammo Bros by the 10 & 15 near Scandia. Test test is a minor $25.00 speed bump, just don't start waving the handgun around while holdin it at an angle like a gangsta
Seriously, enjoy your new XD,
dg

lol im far from a "gangsta" but ill keep that in mind. im in bass pro all the time since it literally around the corner from my house but i think im gonna check out that new ammo bros in ontario

[dg29]

Just be careful because these things have a way of multipling. The other day I went into a store in orange for a deal on .50 cal. ammo cans......and ended up purchasing another Sig.
I think I might have that H1handgun virus