Unconfigured Ad Widget

Collapse

Comps in CA

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sallen67
    Junior Member
    • Jan 2013
    • 60

    Comps in CA

    Sorry I tried to search but the search is not working with my phone. The search box just closes as soon as I click on it.

    What are my options for a comp in CA since I can't get a threaded barrel for my pistol. Is there any alternative method that is worth the time and effort?

    Thanks
  • #2
    naz
    Veteran Member
    • Jun 2020
    • 3108

    What platform?

    Generic answer is : get the comp pinned and welded to the barrel

    Comment

    • #3
      IVC
      I need a LIFE!!
      • Jul 2010
      • 17640

      If the barrel is pulled out by pulling muzzle through the slide (most/all plastic-fantastics) you need threaded barrel if you want to retain the ability to field-strip and separate barrel from the slide. Since threaded barrel on a semi-auto is a no-go in CA (still), your only option is to have the comp permanently attached and lose the ability to separate the barrel from the slide.

      However, 1911/2011 designs disassemble by pulling the *breach* through the slide, so permanently attached comp is a non-issue and you remove the barrel the same way with or without the comp. Stay away from bushing compensators, they don't do much if anything, and they complicate field stripping.

      Looks like you are dealing with a Glock-like pistol, so your only option is to have the comp permanently attached and keep the barrel with the slide. Not the end of the world, just frustrating to have to do it that way.
      sigpicNRA Benefactor Member

      Comment

      • #4
        IVC
        I need a LIFE!!
        • Jul 2010
        • 17640

        Quick note - there are a few comp designs where they are removable, but not using threads. From what I've seen, they are a hit or miss sort of setup. Best to ask someone who went that route.
        sigpicNRA Benefactor Member

        Comment

        • #5
          saudadeii
          CGN/CGSSA Contributor
          CGN Contributor
          • Dec 2012
          • 3474

          There are some that attach to the rail, like HKs. Beretta 92s had one that used an extended guide rod to attach the comp (SGS).

          Otherwise not much available short of pin/weld.

          An alternative is to use a ported barrel.
          My Marketplace Feedback: https://www.calguns.net/forum/market...k#post54003245

          Comment

          • #6
            L-2
            Senior Member
            • Jan 2007
            • 1335

            Radian Weapons designs and manufactures precision AR-platform parts and accessories, including charging handles, triggers, and muzzle devices, built for reliability.

            Radian Weapons has a "Ramjet" product which has its compensator attach onto its own non-threaded barrel.
            Take a look, but you'd have to use it on a Glock of some type.
            The OP didn't specify what brand/model as somebody else also mentioned/requested.
            (former) Glock and 1911 Armorer; LEO (now retired)

            Comment

            • #7
              robledor
              Senior Member
              • Jan 2015
              • 791

              Tagged

              Comment

              • #8
                Palmaris
                Calguns Addict
                • Mar 2009
                • 6581

                Originally posted by L-2
                https://www.radianweapons.com/pistol-products
                Radian Weapons has a "Ramjet" product which has its compensator attach onto its own non-threaded barrel.
                Take a look, but you'd have to use it on a Glock of some type.
                The OP didn't specify what brand/model as somebody else also mentioned/requested.
                Looks interesting, I personally wouldn't touch due to the fact if somebody at DOJ, ATF and/or whatever it is, will try to qualify this locking system as "thread end" and of the barrel. There is no description of the thread type and kind on the book in reference to "threaded barrel". Any locking system can be interpreted as "thread" to hold "illegal" accessory. They left door open to screw us. That's just me.
                sd_shooter:
                CGN couch patriots: "We the people!"

                In real life: No one

                Comment

                • #9
                  RickD427
                  CGN/CGSSA Contributor - Lifetime
                  CGN Contributor - Lifetime
                  • Jan 2007
                  • 9282

                  Originally posted by IVC
                  Quick note - there are a few comp designs where they are removable, but not using threads. From what I've seen, they are a hit or miss sort of setup. Best to ask someone who went that route.
                  Be careful with this one. A lot of alternative mounting designs involve the use of lugs as an alternative to threads. The CCR's define a lug as being a form of thread.
                  If you build a man a fire, you'll keep him warm for the evening. If you set a man on fire, you'll keep him warm for the rest of his life.

                  Comment

                  • #10
                    Fnfan
                    Senior Member
                    • Oct 2018
                    • 1354

                    Send it in to Monsoon Tactical for a port job, or get a threaded barrel/comp it and be careful about where you take it out.

                    Or, just do a fake pin/weld.

                    Comment

                    • #11
                      balver58
                      Member
                      • Jul 2014
                      • 150

                      Originally posted by sallen67
                      Sorry I tried to search but the search is not working with my phone. The search box just closes as soon as I click on it.

                      What are my options for a comp in CA since I can't get a threaded barrel for my pistol. Is there any alternative method that is worth the time and effort?

                      Thanks
                      Same thing happens on my phone or tablet. The work around is to click on "Search this forum," then click on "Advanced Search" at the bottom left of that box. This will open a window that will allow you to put in your search parameters.
                      Originally Posted by DSB :
                      Wow, that is a very specific hypothetical. Why has a small elderly person broken into your home to fight you?
                      Originally posted by beerman
                      They'll get my gas mower when they pry it from Jose's cold dead hands.
                      Originally posted by homelessdude
                      If those darn coyotes want cat they can go to the chinese take out like everyone else.

                      Comment

                      • #12
                        Capybara
                        CGSSA Coordinator
                        CGN Contributor
                        • Feb 2012
                        • 15791

                        Perhaps a question might be why do you think you want a comp? Are you shooting competition? For PD/HD? Or just to look cool/follow a trend? (no judgement)

                        I've been watching a lot of videos about what a comp actually does and how effective they are. The only reason I'd ever want one is for competition and so far, I don't shoot competitively but YMMV.
                        NRA Certified Metallic Cartridge Reloading Instructor, Shotgun Instructor and Range Safety Officer

                        sigpic

                        Comment

                        • #13
                          naz
                          Veteran Member
                          • Jun 2020
                          • 3108

                          Originally posted by Capybara
                          Perhaps a question might be why do you think you want a comp? Are you shooting competition? For PD/HD? Or just to look cool/follow a trend? (no judgement)

                          I've been watching a lot of videos about what a comp actually does and how effective they are. The only reason I'd ever want one is for competition and so far, I don't shoot competitively but YMMV.
                          Which vids and what ammo and what platform? If you have p365 spectre comp vids could you please share?

                          I’m not the op but I’m interested in a comped sub compact with the right ammo that makes enough gas to work the comp as a way to make it easier to shoot the gun even if grip is suboptimal or 1 handed

                          Comment

                          • #14
                            sigstroker
                            I need a LIFE!!
                            • Jan 2009
                            • 19993

                            Originally posted by IVC
                            If the barrel is pulled out by pulling muzzle through the slide (most/all plastic-fantastics) you need threaded barrel if you want to retain the ability to field-strip and separate barrel from the slide. Since threaded barrel on a semi-auto is a no-go in CA (still), your only option is to have the comp permanently attached and lose the ability to separate the barrel from the slide.

                            However, 1911/2011 designs disassemble by pulling the *breach* through the slide, so permanently attached comp is a non-issue and you remove the barrel the same way with or without the comp. Stay away from bushing compensators, they don't do much if anything, and they complicate field stripping.

                            Looks like you are dealing with a Glock-like pistol, so your only option is to have the comp permanently attached and keep the barrel with the slide. Not the end of the world, just frustrating to have to do it that way.
                            It's not a big deal. I have a CZ-75 clone with a permanently attached comp from the factory. Every other non-1911 sold with a comp is the same.

                            Comment

                            • #15
                              Fnfan
                              Senior Member
                              • Oct 2018
                              • 1354

                              Originally posted by naz
                              Which vids and what ammo and what platform? If you have p365 spectre comp vids could you please share?

                              I?m not the op but I?m interested in a comped sub compact with the right ammo that makes enough gas to work the comp as a way to make it easier to shoot the gun even if grip is suboptimal or 1 handed
                              Mike Glover did a good comp?d 365 comparison video

                              Comment

                              Working...
                              UA-8071174-1