Barrel porting service

[Mr. Patis]

I have a p10c that has a window cut on top of the slide...I would like to get my barrel ported....any recommendations?

[L-2]

My thoughts,
Call Mag-Na-Port

https://magnaport.com/index.html

and speak with them. Magnaport will typically cut the barrel AND the slide for ports.

I'm unfamiliar with a CZ P10C and don't remember it coming with any pre-cut slide. Your slide cuts may prevent Magnaport from porting your barrel as the ports may be in the wrong place for Magnaport's specifically placed barrel cuts.

You might take some photos of your slide to show to Magnaport if asked to email them. You might even post those photos in this thread so everyone can understand your particular situation.

Other suggestions might be to place a weight or a weapon light on the accessory rail, rather than no light or a small/light weapon light.
Here's a look at a P10C, which I had to search for anyway as I didn't know what a P10C was.

https://cz-usa.com/product/cz-p-10-c/

Good luck.

[Mr. Patis]

My thoughts,
Call Mag-Na-Port

https://magnaport.com/index.html

and speak with them. Magnaport will typically cut the barrel AND the slide for ports.

I'm unfamiliar with a CZ P10C and don't remember it coming with any pre-cut slide. Your slide cuts may prevent Magnaport from porting your barrel as the ports may be in the wrong place for Magnaport's specifically placed barrel cuts.

You might take some photos of your slide to show to Magnaport if asked to email them. You might even post those photos in this thread so everyone can understand your particular situation.

Other suggestions might be to place a weight or a weapon light on the accessory rail, rather than no light or a small/light weapon light.
Here's a look at a P10C, which I had to search for anyway as I didn't know what a P10C was.

https://cz-usa.com/product/cz-p-10-c/

Good luck.

Sorry...mine didn't come with a window from factory...I sent it to jagerwerks for slide cut and optic cut and window...i can maybe send my complete slide

[rareair]

Check out https://www.sastacticalcustoms.com/c...ow-small-ports

They milled C-ports on my barrel, along with fluting and a cut & crown

[Mr. Patis]

Check out https://www.sastacticalcustoms.com/c...ow-small-ports

They milled C-ports on my barrel, along with fluting and a cut & crown

Thanks...that center line port is what I'm looking for