Beretta work in OC?

[MattB]

[gumby]

Bolsa gunsmithing on Bolsa at Hoover in Westminster, it's where I take all my Beretta's.

[9Cal_OC]

Bolsa gunsmithing on Bolsa at Hoover in Westminster, it's where I take all my Beretta's.

Yp, they’re the approved repair center on the west coast for Beretta.

[keith1911]

But you're SOL if you have a regular job as they're only open M-F 8-5:30.

I use Applied Kinetics in Fullerton for gunsmithing work.

[Sequencer60]

Bolsa gunsmithing on Bolsa at Hoover in Westminster, it's where I take all my Beretta's.

And I believe they're pretty backed up. You will probably be waiting a month or more to get the work done.

[paintballdad]

Beretta's are fairly easy to work on. Shouldn't take much effort to install the LTT tJIAB. What other work are you looking to have done?

[orangeusa]

Beretta's are fairly easy to work on. Shouldn't take much effort to install the LTT tJIAB. What other work are you looking to have done?

Yup. DIY videos help a lot.

[Yodaman]

Beretta work in OC?


Just did the TJIB on a Beretta myself. Easy peasy. And I knew nothing about them other than they had a lot of parts!

Plenty of videos on it, one from LTT themselves.


Sent from my iPhone using Tapatalk

[wl518]

I did the TJIB last year on my LTT Elite and have no experience with Beretta. It was not bad with the videos out there on YouTube. I recommend watching disassembly and assembly of a 92 a few times before you try. It helps a lot.

[Dimitri A.]

Beretta 92 is one of the easiest platforms to work on. As others have mentioned, YouTube is your friend. If you don’t feel comfortable, Bolsa is an authorized Beretta service and repair center, one of a handful in the whole country. I recently took my 30 year old 686 Onyx there for some work. Got it back in just a little bit over three weeks and couldn’t be happier. Alex Tanaka in Gardena is also an extremely competent gunsmith if you don’t go with Bolsa.

[saudadeii]

I did the 92X Xtreme trigger and the G-mod on mine. No previous experience other than shooting it. Had to change the firing pin on my vertec slide. That was a bit more involved but no special tools required.

[Clippers015]

if you need to take it somewhere, I also recommend Applied Kinetics in Fullerton. Took a few of my berettas there over the years in addition to other firearms.

[Uscband79]

Pm sent.