Unconfigured Ad Widget

Collapse

Glock 21 conversion??

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mountaindweller
    Senior Member
    • Mar 2009
    • 528

    Glock 21 conversion??

    Can you convert a Glock 21 down to a 10mm or 40cal? I just posted a thread about the g17 vs 92fs.....I think I am going to stick with the fs for 9mm...but I am going to get the glock for 45acp. I fired a few different ones at the range(45's), HK, Sig, Kimber, Glock...and have to say that I loved them all, but something about the Glock got me....it was SO light and I shot it the most accuratly out of all the pistols. The Sig, HK and Kimber were like Cadillacs, but the G21 just did it for me. Anyway I have been looking on line to see if you can "down-grade" the G21 to 10mm or 40cal....but have just seen and read a lot of speculation, no real answers......does anyone out there really know?
  • #2
    squishyhead
    Member
    • Nov 2008
    • 228

    Don't really know anything about these, just saw them while I was looking at trigger parts.

    "I have 3 lower receivers, 1 upper receiver and two middle fingers." -tiki

    "As someone I know said one time, going after NFA stuff right now is like asking the girl you just met in the bar if she's into anal sex. Babysteps..." -leitung

    Comment

    • #3
      Quiet
      retired Goon
      • Mar 2007
      • 30242

      Yes.
      You can convert a .45ACP to 10x25mm and .40S&W.
      Need a conversion barrel in the caliber you want to convert to. (.45ACP to ???)
      Need to use Glock 20 magazines when shooting 10x25mm, 9x25mm, .40S&W and .357SIG.
      May require changing the ejector block. (.45ACP to 10x25mm)
      sigpic

      "If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun." - Dalai Lama (Seattle Times, 05-15-2001).

      Comment

      • #4
        SJgunguy24
        I need a LIFE!!
        • May 2008
        • 14849

        The best way to go 10mm would be to just build a complete slide assembly and buy a couple of mags. If not then you'll need to swap the extractor and change the barrel out any time you change calibers.
        There are 3 kinds of people in this world.
        The wise, learn from the mistakes of others.
        The smart, learn from their own mistakes.
        The others, well......they just never learn.

        "Is life so dear, or peace so sweet, as to be purchased at the price of chains and slavery? Forbid it, almighty God! I know not what course others may take; but as for me, Give Me Liberty, Or Give Me Death!"
        Patrick Henry.

        Comment

        • #5
          mountaindweller
          Senior Member
          • Mar 2009
          • 528

          Originally posted by SJgunguy24
          The best way to go 10mm would be to just build a complete slide assembly and buy a couple of mags. If not then you'll need to swap the extractor and change the barrel out any time you change calibers.
          That's what I was thinking....so it can be done, thanks. Is the lower frame of the 21 to wide to convert to a 9mm? Being that it couldn't take the mags..

          Anyway not really a big deal, my main concern/want was to convert to 10mm/40cal......thanks for the info.

          Comment

          • #6
            mountaindweller
            Senior Member
            • Mar 2009
            • 528

            Originally posted by Quiet
            Yes.
            You can convert a .45ACP to 10x25mm and .40S&W.
            Need a conversion barrel in the caliber you want to convert to. (.45ACP to ???)
            Need to use Glock 20 magazines when shooting 10x25mm, 9x25mm, .40S&W and .357SIG.
            May require changing the ejector block. (.45ACP to 10x25mm)

            Thank you.

            Comment

            • #7
              Spyduh
              Senior Member
              • May 2008
              • 870

              Originally posted by SJgunguy24
              The best way to go 10mm would be to just build a complete slide assembly and buy a couple of mags. If not then you'll need to swap the extractor and change the barrel out any time you change calibers.
              Easier way to go, is just to buy a G20 and G21 straight up. IMHO the more guns you have the better
              Don't you know the rule?? Never open the safe in front of the wife!!!

              Comment

              • #8
                Futurecollector
                I need a LIFE!!
                • Oct 2008
                • 11562

                Originally posted by Spyduh
                Easier way to go, is just to buy a G20 and G21 straight up. IMHO the more guns you have the better
                + 2 !!!
                None of my posts are serious or real, nothing I post is legal advice.

                Originally posted by SanDiego619
                I am a complete idiot

                Comment

                • #9
                  railroader
                  Veteran Member
                  • Oct 2005
                  • 3115

                  Originally posted by Quiet
                  Yes.
                  You can convert a .45ACP to 10x25mm and .40S&W.
                  Need a conversion barrel in the caliber you want to convert to. (.45ACP to ???)
                  Need to use Glock 20 magazines when shooting 10x25mm, 9x25mm, .40S&W and .357SIG.
                  May require changing the ejector block. (.45ACP to 10x25mm)
                  I have heard of conversion barrels from 40 to 9mm, 10mm to 40 and 357 to 40 never 45 down to 40 without a slide change. There is the 400 corbon which is a necked down 45 with a 40 caliber bullet. I'd really like to see a link for a 40 cal conversion barrel for a 45. It would be news to me but I have been wrong before. Mark

                  Comment

                  • #10
                    SJgunguy24
                    I need a LIFE!!
                    • May 2008
                    • 14849

                    Originally posted by Spyduh
                    Easier way to go, is just to buy a G20 and G21 straight up. IMHO the more guns you have the better
                    Sure you could do that, don't for get the DROS fee, and waiting 30 days + another 10 days to buy......oh yeah it'll also be in the DOJ computer. Or just get a new top end without paperwork and just slap it on.
                    There are 3 kinds of people in this world.
                    The wise, learn from the mistakes of others.
                    The smart, learn from their own mistakes.
                    The others, well......they just never learn.

                    "Is life so dear, or peace so sweet, as to be purchased at the price of chains and slavery? Forbid it, almighty God! I know not what course others may take; but as for me, Give Me Liberty, Or Give Me Death!"
                    Patrick Henry.

                    Comment

                    • #11
                      SJgunguy24
                      I need a LIFE!!
                      • May 2008
                      • 14849

                      Originally posted by railroader
                      I have heard of conversion barrels from 40 to 9mm, 10mm to 40 and 357 to 40 never 45 down to 40 without a slide change. There is the 400 corbon which is a necked down 45 with a 40 caliber bullet. I'd really like to see a link for a 40 cal conversion barrel for a 45. It would be news to me but I have been wrong before. Mark
                      It can be done. The extractor needs to be swapped, and the aftermarket barrel will need a fully supported chamber. I'll always recommend just building a new top end insted of retrofitting.
                      There are 3 kinds of people in this world.
                      The wise, learn from the mistakes of others.
                      The smart, learn from their own mistakes.
                      The others, well......they just never learn.

                      "Is life so dear, or peace so sweet, as to be purchased at the price of chains and slavery? Forbid it, almighty God! I know not what course others may take; but as for me, Give Me Liberty, Or Give Me Death!"
                      Patrick Henry.

                      Comment

                      • #12
                        railroader
                        Veteran Member
                        • Oct 2005
                        • 3115

                        Originally posted by SJgunguy24
                        It can be done. The extractor needs to be swapped, and the aftermarket barrel will need a fully supported chamber. I'll always recommend just building a new top end insted of retrofitting.
                        Where do you get the barrel? It would have to be the same outside diameter as a 45. I'm not saying they don't exist but I went to the normal places and they aren't listed. (Edit) I found some KKM 10mm conversion barrels for a glock 21. Here's more info from glocktalk: http://glocktalk.com/forums/showthre...+21+conversion
                        Last edited by railroader; 05-31-2009, 9:11 AM.

                        Comment

                        • #13
                          bohoki
                          I need a LIFE!!
                          • Jan 2006
                          • 20826

                          how abtou that 50 gi

                          Comment

                          • #14
                            APNF128
                            Senior Member
                            • Feb 2009
                            • 1156

                            Just pondering your idea, why stick to FS on the 9mm then go Glock-21 on the 45cal. Just like you said if you can shoot G-21 far better than the others wouldn't make more sense to stick to one platform and master them. As the old man say's beware of a guy who only shoot one type of a gun!

                            Comment

                            • #15
                              Futurecollector
                              I need a LIFE!!
                              • Oct 2008
                              • 11562

                              Originally posted by SJgunguy24
                              Sure you could do that, don't for get the DROS fee, and waiting 30 days + another 10 days to buy......oh yeah it'll also be in the DOJ computer. Or just get a new top end without paperwork and just slap it on.
                              someone seemes a lil



                              anyways so what, what is a top end costing like 400 ish right, get a new 10mm and buy a used .45, or the other way around, then you dont have to worry about 1 in 30 day rule!
                              None of my posts are serious or real, nothing I post is legal advice.

                              Originally posted by SanDiego619
                              I am a complete idiot

                              Comment

                              Working...
                              UA-8071174-1