Draco pistol.

[klikoman]

hello fellow calgunners. I been looking to buy a draco pistol but most FFL i talk to wont order one for me. LEO here btw so i can buy off roster. I know that i will need to have a ak maglock for the draco, since my ar pistols are the same. Instead of me driving around town any FFL willing to work with me? And what available ak maglock is outthere for the ak platform? Location bay area.

[r1ghtw1ng]

Check out the AK Compmag. It looks like the least invasive device. But AK's as a whole are a hassle to comply with.

[P5Ret]

Just a thought, it might be a good idea when you're looking for a FFL to work with, to let people know where you are.

[Quiet]

I been looking to buy a draco pistol but most FFL i talk to wont order one for me. LEO here btw so i can buy off roster.

It needs to be made CA legal before it can be imported into CA.
^Your LEO status does not provide an exemption to CA assault weapons laws.

You or your CA FFL dealer, needs to find an out-of-state vendor that sells CA legal Draco or willing to modify a Draco to be CA legal and then ship it to your CA FFL dealer.

And what available ak maglock is outthere for the ak platform?

Option A. Weld a 10 round magazine into the magazine well.
Option B. Install AK MagLatch and modified* 10 round magazine.
Option C. Install AK Compmag.

*Must use modified magazines only. Using unmodified magazines makes the firearm an illegal assault weapon.


Loading procedure for Option A:
1. Remove top cover.
2. Remove recoil spring.
3. Remove bolt-carrier group.
4. Load cartridges into magazine.
5. Install bolt-carrier group.
6. Install recoil spring.
7. Install top cover.
8. Charge firearm.
9. When firearm is unloaded, repeat #1-8.

Loading procedure for Option B:
1. Remove top cover.
2. Remove recoil spring.
3. Remove bolt-carrier group.
4. Load cartridges into magazine or replace the empty magazine with a loaded magazine.
5. Install bolt-carrier group.
6. Install recoil spring.
7. Install top cover.
8. Charge firearm.
9. When firearm is unloaded, repeat #1-8.

Loading procedure for Option C:
1. Pull down magazine spring tab and lock in place.
2. Open magazine side cover.
3. Load cartridges into magazine.
4. Close magazine side cover.
5. Release magazine spring tab.
6. Charge firearm.
7. When firearm is unloaded, repeat #1-6.

[mlevans66]

My gun store clean sold out of them.

[DT556]

Compmag is the best way to make compliant, but like others said it has to come into the state already installed.

[DT556]

Prepper Gun Shop is very CA friendly and I'm sure they'll install the Compmag for you before shipping for little or no charge

[klikoman]

It needs to be made CA legal before it can be imported into CA.
^Your LEO status does not provide an exemption to CA assault weapons laws.

You or your CA FFL dealer, needs to find an out-of-state vendor that sells CA legal Draco or willing to modify a Draco to be CA legal and then ship it to your CA FFL dealer.


Option A. Weld a 10 round magazine into the magazine well.
Option B. Install AK MagLatch and modified* 10 round magazine.
Option C. Install AK Compmag.

*Must use modified magazines only. Using unmodified magazines makes the firearm an illegal assault weapon.


Loading procedure for Option A:
1. Remove top cover.
2. Remove recoil spring.
3. Remove bolt-carrier group.
4. Load cartridges into magazine.
5. Install bolt-carrier group.
6. Install recoil spring.
7. Install top cover.
8. Charge firearm.
9. When firearm is unloaded, repeat #1-8.

Loading procedure for Option B:
1. Remove top cover.
2. Remove recoil spring.
3. Remove bolt-carrier group.
4. Load cartridges into magazine or replace the empty magazine with a loaded magazine.
5. Install bolt-carrier group.
6. Install recoil spring.
7. Install top cover.
8. Charge firearm.
9. When firearm is unloaded, repeat #1-8.

Loading procedure for Option C:
1. Pull down magazine spring tab and lock in place.
2. Open magazine side cover.
3. Load cartridges into magazine.
4. Close magazine side cover.
5. Release magazine spring tab.
6. Charge firearm.
7. When firearm is unloaded, repeat #1-6.

Cool thanks you. Yes i lnow we are not AW exempt or else ill be broke now lol.

[klikoman]

Prepper Gun Shop is very CA friendly and I'm sure they'll install the Compmag for you before shipping for little or no charge

i will contact them thanks