CZ grip screw

[akjunkie]

Looking for some CZ grip screws.
Specifically Torx head. Anyone know the specs?
Thread pitch, length, etc.

TIA

[SkyHawk]

What Cz gun exactly? They are not all the same.

[tbc]

Lokgrips.com


Sent from my iPhone using Tapatalk

[Palmaris]

Armory Craft

[akjunkie]

What Cz gun exactly? They are not all the same.

Oops. CZ 75

[prestige]

https://lokgrips.com/cz-gun-grips/cz-75/accessories/t20-torx-grip-screws/

I just ordered my 3rd set of grips from them. Great company and products!

[Tok36]

Grip scerw dims for 75 Variant

3.5mm X 0.6 thread X 6 - 8mm long (Factory 8mm, Some Aftermarket 6mm)

[ChocoRolles]

Armory Craft

This

[akjunkie]

Grip scerw dims for 75 Variant

3.5mm X 0.6 thread X 6 - 8mm long (Factory 8mm, Some Aftermarket 6mm)

Where can I order this in bulk?

This would be M3.5 x 0.6, Length 8mm?

[prestige]

M3.5 Hex flat head 6mm
M3.5 Hex flat head 8mm

M3.5 Torx button head 6mm
M3.5 Torx button head 8mm

M3.5 Torx flat head tamper-resistant 6mm
M3.5 Torx flat head tamper-resistant 8mm

They don't have M3.5 torx with flat head though.

[Powder_Keg]

^^^ McMasterCarr
Good quality stuff and a well put together website

[akjunkie]

M3.5 Hex flat head 6mm
M3.5 Hex flat head 8mm

M3.5 Torx button head 6mm
M3.5 Torx button head 8mm

M3.5 Torx flat head tamper-resistant 6mm
M3.5 Torx flat head tamper-resistant 8mm

They don't have M3.5 torx with flat head though.

AWESOME!!! Thanks!

[SkyHawk]

Where can I order this in bulk?

This would be M3.5 x 0.6, Length 8mm?

Length 6mm to 8mm, depending on the grips thickness, the depth of the screw hole countersink, whether you plan to use O-ring or not, etc. You want long enough to hold the grip securely and have good thread contact in the bushing, but not so long that they penetrate into the magwell.