RESOLVED
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
RESOLVED
Collapse
X
-
Tags: None
-
I would say it would work as long as it's clamped down enough. A penny will probably suffice. I know you don't want to scuff up the frame, but it will probably happen anyway if it's being used. Have you tried to forcibly slide it off?
I would say your bigger problem would be a holster. The TLR 7-8 holsters are a little harder to find and if your light isn't in the same position as the holster maker used, it may be problematic. -
look at this data sheet, the bottom page tells which key to use per gun mfg. This is for the TLR1 I have but will work the same for compact lights.
Comment
-
Try other keys. I use the Glock key on my SA XD9
Sent from my SM-G965U using Tapatalk"It is currently CA legal to modify a double-action revolver into a single-action revolver and modify a single-action revolver into a double-action revolver.
CA DOJ BOF stance on modifying handguns only applies to dimensionally compliant bolt-action single-shot pistols and dimensionally compliant break-open single-shot pistols.
^It does not apply to revolvers, manually operated repeating pistols, and semi-auto pistols." ~~ QuietComment
-
I would at least put a Glock key to ensure it will never slide offComment
-
You should be able to close up that gap with the right key. A penny makes the perfect tool for loosening and tightening the retention screw. I personally would not use it without some sort of key.Comment
-
Is there not another cross slot more towards the trigger?
When I put mine on, I had to put the key in the spot, then tighten the rails down. Wasn't able to slide it along the rails.
Sent from my SM-G965U using Tapatalk"It is currently CA legal to modify a double-action revolver into a single-action revolver and modify a single-action revolver into a double-action revolver.
CA DOJ BOF stance on modifying handguns only applies to dimensionally compliant bolt-action single-shot pistols and dimensionally compliant break-open single-shot pistols.
^It does not apply to revolvers, manually operated repeating pistols, and semi-auto pistols." ~~ QuietComment
-
I believe a key is always required, at least according to the design intent. With only a handful of keys and a data sheet that doesn't cover much of what is out there, it really falls back to trial and error. Out of habit, I usually try all of them by themselves in the groove to get an idea how close they are. Sometimes the key that works for a particular gun isn't the one you expect.
To add to that, my USP 45 and USP 45 expert do not have the same spec'd rail system. Neither do my M9A1 and 92A1. So much for uniformity......Comment
-
Also consider that there are two fitment considerations: Obviously the width is the first, but the depth too. Some keys fit nicely into the slot but are too long and create a gap between the top of the light and the bottom of the rail.Comment
-
-
Lol, that's what I sad earlier in the thread. That I had to put the key in, then clip the rails on the outer rails and tighten them down"It is currently CA legal to modify a double-action revolver into a single-action revolver and modify a single-action revolver into a double-action revolver.
CA DOJ BOF stance on modifying handguns only applies to dimensionally compliant bolt-action single-shot pistols and dimensionally compliant break-open single-shot pistols.
^It does not apply to revolvers, manually operated repeating pistols, and semi-auto pistols." ~~ QuietComment
-
Thanks Jimbo. Missed your reply.
Sent from my iPhone using TapatalkComment
Calguns.net Statistics
Collapse
Topics: 1,870,845
Posts: 25,176,591
Members: 358,862
Active Members: 5,398
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 30251 users online. 63 members and 30188 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.


Comment