Delete!

[Elgindy25]

Gun is gone please delete this!

[code_blue]

You have 21SF MB model. Does yours have the 1913 rail on it? That's a pretty rare model. Have you tried calling Glock USA to see if they'd replace it if that's what you truly wanted?

IIRC, the Gen4 21 mags should work since they have the ambi cuts. Have you tried those?

[SemperInExcretiaSumus]

You might try the Glock Store in Clairemont Mesa, it's off of Ronson Rd and Ruffin Rd, between Balboa Avenue and Clairemont Mesa Blvd. As the name suggests they specialize in Glocks and have a ton of aftermarket and stock Glock parts, they probably have the mags you need too.

[Elgindy25]

Semper fi, thats where i went and thats where i found out this was a glock 21 sf ambi, ill have to look for gen 4 glock mags, but im hoping that discount will spot me mags if they do work because even though it was a consignment, had they done a basic function test, this could been avoided. Whoever sold the gun knew what he was doing because he consigned it with no mags, im sure that discount would have noticed the problem right away had he included mags.

[Gregchico]

If yours is like mine, you should only need the "ambi cut" magazines.




Does your magazine catch look like this?

[Elgindy25]

You need the Gen 4 mags.
If you found this model, I'm jealous, it took me almost 3 years to find this particular one.

Edit to add: Just tried the "SF Cut" style and they worked fine in my gun.

How rare are these? I truly hope you are right and that gen 4 mags will work because id rather not sell this if i dont have too but i need the gun to work.

[BigPimping]

Did you try calling the company in Georgia? They are very helpful.

[Gregchico]

How rare are these? I truly hope you are right and that gen 4 mags will work because id rather not sell this if i dont have too but i need the gun to work.

After my first post I went back and checked some of my other magazines. I updated my post with the current info.

As far as rare, the picatinny rail models (from what I can remember from my initial research so I'm not able to back any of this) I read on the Glock forum that there was 3000-ish of these released to the public back in 2010-ish and due to some pistols having problems Glock has exchange program with the frame. Again, I can not back up any of this with concrete facts.

[Elgindy25]

Rail seems like normal glock rail?

I just looked at mine, it doesnt have the same rail as yours but still has an ambi mag release?

[Gregchico]

I just looked at mine, it doesnt have the same rail as yours but still has an ambi mag release?

Yep

[Elgindy25]

Ive looked on google and seen others with the same rail as mine and still ambi mag release, just not a picatinny rail, but apparently this one is still off roster.

[sigstroker]

I have a Gen 4. One mag has the weird center cutout, the other two don't. So if you need the center cutout, don't assume any Gen 4 mag will work.

[Elgindy25]

Well if anyone has one of the ones with a cutout id love to buy it or even just try it to see if it fits for anyone in san diego! Ill pay you $10 just to let me test fit it wether i buy it or not.

[Elgindy25]

If yours is like mine, you should only need the "ambi cut" magazines.




Does your magazine catch look like this?

Ill have to double check but i believe it has a thing in the middle that pops in and out not side to side like a standard one i was showed at glock store.

[Elgindy25]

This is such a pain to have to have specific mag types for a gun just to get it work, glock is supposed to be simple, id rather not have to send mine off to glock and change the frame because im sure that would take ages.