CZ P10c question.

[stormvet]

[Old Flash]

Yeah, looks like a recent redesign.
According to CZ-USA:
"One change that happens on both the US-made and Czech-made P-10s is the switch to a swappable magazine release. With a change in geometry, the goal was to eliminate the stiffness some customers experienced as the magazine release broke in, even though it became smooth after some use. This new reversible release just requires a few minutes to swap, allowing the P-10 to remain lefty-friendly. "

Here's the link: https://cz-usa.com/product/cz-p-10-c/

My P10C is an ambi but I don't have issues with it.

[stormvet]

Thanks for the info, kinda thought so. Mine is only an issue with a full 15 round mag, pretty stiff and hard to release. Pushing a little on the bottom of the mag makes it much easier. A empty or partially empty mag is not an issue, I’ve got quite a bit of rounds fired with it and mag changes not sure it’s ever going to get better.

Next time I visit my buddy I’ll see if it’s a direct replacement or not, if so I may make the switch.

[railroader]

Apex makes an extended mag release that might work better.

[stormvet]

Apex makes an extended mag release that might work better.