Kriss Vector pistol mag-lock, does one exist?

[Adeodatus]

I've been looking around like crazy for a mag lock for a vector pistol and can't find one. Anyone know if they exist? I'm at the point of just manufacturing one myself for compliance.

[Quiet]

I've been looking around like crazy for a mag lock for a vector pistol and can't find one. Anyone know if they exist? I'm at the point of just manufacturing one myself for compliance.

Currently, there is no new magazine lock design that is commerically available that will make it 2017 compliant.

The only method of making it a fixed magazine is to permanently attach (weld/epoxy/rivet) the magazine into the magazine well.

Current options for a semi-auto KRISS Vector pistol with a "bullet button" style magazine lock: (one of these must be done by 07-01-2018)
A. Register it as an assault weapon.

B. Make it a semi-auto pistol with a fixed magazine.
^Permanently attach a 10 round magazine into the magazine well.

C. Make it a featureless semi-auto centerfire rifle.
^Increase barrel length to 16" or greater and install grip wrap and install fixed shoulder stock so that the overall length is 30" or greater.

D. Parts.
^Disassemble it into parts and never assemble it while in CA. It is also prudent to store the parts in seperate locked containers/locations.

E. Take it out-of-state for storage or to transfer through an out-of-state FFL.

F. Make it permanently inoperable.
^Destroy the receiver per BATFE specifications.

G. Surrender it to law enforcement for destruction.

[Adeodatus]

EUREKA!!!!

I just came up with a simple solution to manufacturing a mag lock for it!

Going to have some fun in the shop tomorrow!

Thanks Quiet!

[Quiet]

I just came up with a simple solution to manufacturing a mag lock for it!

Remember, in order to be 2017 CA legal, the magazine lock needs to prevent the magazine from being able to be removed until the firearm's action is disassembled.

For the TDI KRISS Vector, the firearm's action being disassembled means...

[Adeodatus]

Remember, in order to be 2017 CA legal, the magazine lock needs to prevent the magazine from being able to be removed until the firearm's action is disassembled.

For the TDI KRISS Vector, the firearm's action being disassembled means...

[Ultraxr]

I know this is a really old thread but I was wondering what you came up with for a mag-lock solution for your vector pistol.

[Verndogg]

updating this thread because I'm also very curious if anyone has come up with another option to suffice. I've noticed MagLatch makes a maglock for the Kriss Vector but it's always out of stock.. anyone have experience with the Vector MagLatch?