Unconfigured Ad Widget

Collapse

GP-100 Help

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • vospertw
    Senior Member
    • Apr 2012
    • 791

    GP-100 Help

    I have a 3" GP100 with the Compact Ruger grips installed. The grips are a pretty close fit for me, but I'd like to have a bit more leverage especially when shooting one-handed. Anyone know of a grip for the GP that would have a more closed grip angle or a bit shorter LOP? I was looking at the boot grip on my J-frame; it comes down at more of a 90 degree angle whereas the Ruger grip rakes backward a bit more. (just talking grip angle, not grip length - the Ruger is spot on for me)

    Also, anyone have experience with a revolversmith that does good trigger work on GP's? Of course, maybe I should just shoot it more...

    Thanks in advance.
    Jesus Saves!
  • #2
    ShellBackItUp
    Member
    • Jan 2016
    • 235

    Evening OP

    I too have struggled finding grips that I like on my GP-100 (which I've had since the day I turned 21). Lyman grips have a good feel in the hand and doesn't feel as swept back as much as the standard Ruger grips. However I got two lemons from them, with manufacturing defects, and returned them both. Best of luck on the grips.

    On the trigger side of things though, if you are mechanically able, I'd suggest trying your own trigger work. The Ruger GP-100 (and SP-101) are incredibly easy to work on, and there's quite a few guides online (search for "Ruger GP100 Book of Knowledge" and "Ruger SP101 Trigger Job Guide" for the the best pictorial guides you can find IMHO).

    All you need is some super fine grit sandpaper and some patience, and you can get your single and double action pulls to feel like butter.

    I haven't yet taken my feeler gauges and bought the trigger shims to put around the hammer and cylinder (similar to the GP100 Match Champion) but those are my next project once summer is over.

    I haven't measured the single and double action pulls (don't have a gauge), but after just a little polishing (and a lot of dry firing the double action), my trigger action is as good as I could want it.

    Best of luck with getting that lovely hunk of metal exactly how you want it!

    Comment

    • #3
      RocketRider
      Member
      • Nov 2012
      • 254

      I bought some snap caps and dry fired my GP100 about 800 times in double action over 2 or 3 evenings. It really smoothed out the DA trigger. Give it a try, it's the easiest and cheapest method. If it's not smooth enough after that, you can always still get a trigger job.

      I don't have any tips on grips. I have the 4", and like the stock grips it came with.

      Enjoy your GP100! I think they are great guns.

      Comment

      • #4
        SoCal Bob
        Calguns Addict
        • May 2010
        • 5357

        No suggestions but my understanding is that the 3" has a different grip frame then the 4" & 6" models. You might check & verify that to aid your grip search.

        I agree that shooting (or dry firing) the GP100 will smooth it out.

        Comment

        • #5
          PachecoFTW
          • May 2010
          • 1422

          Whoa, whom sells trigger and hammer shims for the Ruger gp100?
          I know my match champion has then but the hammer shims still feel very loose too much play in no.
          Also any website or place to see a detailed stripping and polishing points?
          I tried using the manual but the pictures suck.


          Originally posted by ShellBackItUp
          Evening OP

          I too have struggled finding grips that I like on my GP-100 (which I've had since the day I turned 21). Lyman grips have a good feel in the hand and doesn't feel as swept back as much as the standard Ruger grips. However I got two lemons from them, with manufacturing defects, and returned them both. Best of luck on the grips.

          On the trigger side of things though, if you are mechanically able, I'd suggest trying your own trigger work. The Ruger GP-100 (and SP-101) are incredibly easy to work on, and there's quite a few guides online (search for "Ruger GP100 Book of Knowledge" and "Ruger SP101 Trigger Job Guide" for the the best pictorial guides you can find IMHO).

          All you need is some super fine grit sandpaper and some patience, and you can get your single and double action pulls to feel like butter.

          I haven't yet taken my feeler gauges and bought the trigger shims to put around the hammer and cylinder (similar to the GP100 Match Champion) but those are my next project once summer is over.

          I haven't measured the single and double action pulls (don't have a gauge), but after just a little polishing (and a lot of dry firing the double action), my trigger action is as good as I could want it.

          Best of luck with getting that lovely hunk of metal exactly how you want it!

          Comment

          • #6
            thoughtpolice59
            Junior Member
            • May 2013
            • 70

            TriggerShims - Precision Gun Shims. Family owned, American made since 2008.

            Comment

            • #7
              thoughtpolice59
              Junior Member
              • May 2013
              • 70

              Ruger GP100s are reliable revolvers that are a lot of fun to shoot. Unfortunately, out of the box, the trigger pull is heavy and the trigger...


              Comment

              • #8
                ShellBackItUp
                Member
                • Jan 2016
                • 235

                Originally posted by PachecoFTW
                Whoa, whom sells trigger and hammer shims for the Ruger gp100?
                I know my match champion has then but the hammer shims still feel very loose too much play in no.
                Also any website or place to see a detailed stripping and polishing points?
                I tried using the manual but the pictures suck.
                Here's the GP-100 Book of knowledge
                Iowegan’s Book of Knowledge for the Ruger GP-100 revolver Written by Iowegan This material is copyrighted by the author. Please visit the Ruger Forum for additional IBOK’s on various Ruger mo…


                Here's the SP101 guide, nearly identical to the GP-100, and has better pictures.


                And thoughtpolice already shared the link for the shims (http://www.triggershims.com/

                Comment

                • #9
                  ShellBackItUp
                  Member
                  • Jan 2016
                  • 235

                  Hadn't seen these ones, great pics, thanks thoughtpolice!

                  Comment

                  • #10
                    vospertw
                    Senior Member
                    • Apr 2012
                    • 791

                    Thanks guys! Appreciate the info. As far as the grips, I have a 6" GP100 from late 80's and the same compact grips sold at the Ruger store fit both guns. Someone said they used to come on the shorter barreled models, but can't vouch for it. But they are nearly perfect and decently priced.
                    Jesus Saves!

                    Comment

                    • #11
                      thoughtpolice59
                      Junior Member
                      • May 2013
                      • 70

                      One last thing,
                      You're probably aware of this, but with the GP100 frame you have a lot of room to play with your grip shape. On most wood grips there is a lot of material that can be ground off of the back surface. Just get a cheap full sized grip and have at it with a Dremel. Refinish it and you've got a great grip for your revolver that will fit you like a glove.

                      Comment

                      • #12
                        FalconLair
                        Veteran Member
                        • Apr 2012
                        • 3994

                        Originally posted by RocketRider
                        I bought some snap caps and dry fired my GP100 about 800 times in double action over 2 or 3 evenings. It really smoothed out the DA trigger. Give it a try, it's the easiest and cheapest method. If it's not smooth enough after that, you can always still get a trigger job.
                        GP100 has a transfer bar, you don't need snap caps to safely dry fire it

                        OP, Badgergrips make some boot grips for the Ruger GP100 - you might find something you like to try


                        Badger Custom Grips makes the finest revolver grips on the market. With grips for Smith & Wesson, Ruger, and Colt, Badger's unique designs and customization options allows customers to customize the look and feel of their grip to perfectly fit the shooter.
                        Originally posted by Barang
                        I! hate! you! FalconLair.
                        Originally posted by JagerDog
                        I hate you FalconLair!
                        Originally Posted by JTROKS
                        I hate you FalconLair! I double hate you if you get it before Christmas!
                        Originally posted by gcvt
                        They hate you FalconLair
                        Originally posted by Greta
                        HOW DARE YOU!! I hate you FalconLair

                        Comment

                        • #13
                          TeddyBallgame
                          Calguns Addict
                          • Sep 2012
                          • 5732

                          Originally posted by vospertw
                          I have a 3" GP100 with the Compact Ruger grips installed. The grips are a pretty close fit for me, but I'd like to have a bit more leverage especially when shooting one-handed. Anyone know of a grip for the GP that would have a more closed grip angle or a bit shorter LOP? I was looking at the boot grip on my J-frame; it comes down at more of a 90 degree angle whereas the Ruger grip rakes backward a bit more. (just talking grip angle, not grip length - the Ruger is spot on for me)

                          Thanks in advance.
                          OP, Uncle Mike's had a nice set of grips for the GP100...i've heard they are no longer in production, but, i found a set on Ebay that i bought...not sure if this is what you might be interested in finding...i have the 3" too, it came originally with the big Hogue grips



                          sigpic

                          Comment

                          Working...
                          UA-8071174-1