Red Dot / RMR on a Glock... $229....

[hermosabeach]

So there is a trainer who uses a few names and he promoted the RMR Glock combo... Kelly McCann aka Jim Grover

His draw drills with the RMR combo are excellent

I know that others came along, kinda claimed the idea as their own invention...

Fortunately Glock started making a factory version...
Lone Wolf is making an RMR slide too

And now- I just got an ad from Brownells

http://www.brownells.com/handgun-parts/slide-parts/slides/rmr-slide-for-gen3-glock-17-stainless-nitride-sku078200001-107977-206178.aspx?sku=078200001&utm_medium=email&utm_source=marketo&utm_campaign=2017_08_17_newproducts&utm_content=newproducts&mkt_tok=eyJpIjoiTkRBME5qVmhPREUwWm1JMyIsInQiOiJsVm16S1wvWVZQUzFxSWJaS0o3NXFobUNrYjFcLzZha0R0SWJ1eTBQSWlMbXoxNmJvRVFHZkVMYkZxWVdnQ3A1VVllbU9Nb0h3VlBoUUoyVm1hbTBSRHkwckhPeFB4WWg0WElEVHNnZTg2U01NOHVZbUVuSGRxMUdFXC9rV1ErRkxcL2gifQ%3D%3D

As we can't get gen 4 Glocks in CA, I guess RMR is our way to keep them fun...

[9mmContagion]

Not a bad price! RMR cut alone is about $125 + 3 week wait and shipping back and forth. For another $80 you can get this whole slide which includes front serrations

[echopapa]

$209 if you use the code LDN

[solipsism]

Absolutely hideous but a great price regardless.

[sitruc]

Argh, 19s with no window are out of stock/no back-order.

Thanks for post.

It is advertised that it will co-witness with irons. Anyone know if it is a lower 1/3 co-witness or absolute?

[Steve1968LS2]

That would work on a gen4.. right?

I have an RMR.. might be fun to try for that price, but my G17 is a gen 4

Or I could get a G19 one.. but it's a gen2 ..

I guess I don't like gen3s.. lol

So, any reason why it wouldn't work with gen4 or 2?

Also, looks like a bare slide, so you need all the rest of the bits to make it work (if you didn't want to rob your existing slide).

[jpm804]

That would work on a gen4.. right?

I have an RMR.. might be fun to try for that price, but my G17 is a gen 4

Or I could get a G19 one.. but it's a gen2 ..

I guess I don't like gen3s.. lol

So, any reason why it wouldn't work with gen4 or 2?

Also, looks like a bare slide, so you need all the rest of the bits to make it work (if you didn't want to rob your existing slide).

Will work on a Gen4 Frame will just have a little gap from the slide to frame in front where the guide rod is.

[Steve1968LS2]

Will work on a Gen4 Frame will just have a little gap from the slide to frame in front where the guide rod is.

What about a gen 2?

Might be fun on my G19?

[jpm804]

What about a gen 2?

Might be fun on my G19?

Looked it up... looks like it will fit fine.

https://www.glocktalk.com/threads/gen-2-frame-gen-3-slide-assembly.1601863/

[Varg Vikernes]

Some people are saying the Delta Point Pro is better.

[JDMIS300]

Some people are saying the Delta Point Pro is better.

It is not...

[Andyman562]

It is not...

That's just your opinion.

I say check both out. I personally like the Delta Point Pro better. No tinted glass and a bigger sight picture and less frame boarders around the glass. There was also a survey that went around showing how most competitive shooters are using the C-more or delta point; also stated how the delta point is becoming more and more used competitively.

[NorCalEmperor]

Brownells does not carry an optic cut slide for the DPP. this means that the RMR is better.

[floogy]

Are there other red dots that use an rmr mount?

Sent from my Nexus 7 using Tapatalk

[fmunk]

It is not...

And for that matter Shield RMS is even better, if just slightly, than the Trijicon RMR. It costs less and is about the same width as a Glock slide. RMR is slightly wider. The problem is you'd be looking at a Glock MOS slide or custom cut if you want to mount one. And, most places that offer slide work don't yet mill for this sight.