Unconfigured Ad Widget

Collapse

Registering an Encore frame as a pistol instead of a rifle....

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    Capt.Dunsel
    Senior Member
    • May 2011
    • 1199

    Originally posted by dfletcher
    Don't you just love the way ATF uses language? Safire would be proud.

    "Held further, a firearm, as defined by 26 U.S.C. 5845(a)(3) and (a)(4), is not made when parts in a kit that were originally designed to be configured as both a pistol and a rifle are assembled or re-assembled in a configuration not regulated under the NFA (e.g., as a pistol, or a rifle with a barrel of 16 inches or more in length).

    Held further, a firearm, as defined by 26 U.S.C. 5845(a)(3) and (a)(4), is not made when a pistol is attached to a part or parts designed to convert the pistol into a rifle with a barrel of 16 inches or more in length, and the parts are later unassembled in a configuration not regulated under the NFA (e.g., as a pistol)."


    Meaning, well it looks like a rifle but it's not really a rifle - it's only a pistol temporarily put together like a rifle .....

    Every time I read one of these threads I end up buying another T/C barrel. No one makes one for the 458 SOCOM, do they?
    HMMMMM ? You look into SSK Industries ? they got one in 458 Win Mag ? And list a 416 , you could get one there made just have to watch the pressure.
    These are of course the Encore version .

    458win mag 53,000 cup pressure , 458 socom 35,000 cup. Looks like you might get one made, if you can find an original reamer .
    Last edited by Capt.Dunsel; 07-07-2017, 9:03 PM.
    Bweise says "I have to say the situation was not at all helped by 22 yr old former Airsoft douches who kept touting here, "But possession is not illegal!" "

    Fighting on the internet is like being in the special Olympics , everybody wins but your still retarded.

    Librarian " Calguns is not a 'general discussion board".

    Comment

    • #17
      dfletcher
      I need a LIFE!!
      • Dec 2006
      • 14768

      Originally posted by Capt.Dunsel
      HMMMMM ? You look into SSK Industries ? they got one in 458 Win Mag ? And list a 416 , you could get one there made just have to watch the pressure.
      These are of course the Encore version .

      458win mag 53,000 cup pressure , 458 socom 35,000 cup. Looks like you might get one made, if you can find an original reamer .
      I've looked at SSK, Bullberry too. I've always leaned toward MGM. At the Reno show many years back they gave me an 8mm Mauser barrel, have helped me on a few other deals. They offer the 458 too, but I have a Ruger No1 and am content with that. I hear the rebated rim on the SOCOM causes an extraction reliability issue and there may be a rimmed version out there just for the T/C.

      The 25s always do well for me - 25.35 Win, 257 Roberts and the Weatherby. Maybe it's time for the 250 Savage
      GOA Member & SAF Life Member

      Comment

      Working...
      UA-8071174-1