Unconfigured Ad Widget

Collapse

G32 trigger pins backing out

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lakersfan
    Member
    • Apr 2015
    • 499

    G32 trigger pins backing out

    Four range trips with my G32 this week. The second trip the trigger pin that connects it to the trigger bar backed out. Today the trigger safety pin backed out. Shot 200 rounds each trip. No trouble shooting them at the range only noticed it when I brought them home. Never had this happen with my G17. Not sure what I can do but keep an eye on them and push them back in if they back out.
  • #2
    SkyHawk
    I need a LIFE!!
    • Sep 2012
    • 23523

    You could just buy a new trigger bar assembly. You could also peen one end of each of those pins, which is what I'd probably try first. They'd be one way in and out after that though, be sure the peened end never gets pulled through the plastic, but is always last in & first out.

    Anyhow, $15 cure
    Last edited by SkyHawk; 05-26-2017, 4:00 PM.
    Click here for my iTrader Feedback thread: https://www.calguns.net/forum/market...r-feedback-100

    Comment

    • #3
      santacruzgunner
      Senior Member
      • Jun 2016
      • 549

      The trigger pin is held in by slide release push it in till it clicks. If you're still having problems try a new slide release

      Comment

      • #4
        lakersfan
        Member
        • Apr 2015
        • 499

        Not the large trigger pin going through the frame, the other two tiny pins in the trigger area. They both only go in one way. Only 800 rounds through the gun. At least its only a $15 fix. Want a smooth trigger anyway so get one for a 17.
        Last edited by lakersfan; 05-26-2017, 4:30 PM.

        Comment

        • #5
          otteray
          Veteran Member
          • Feb 2006
          • 3246

          Blue Loctite on the outside end of the pins will solve the problem.
          sigpic
          Single fin mentality

          Comment

          • #6
            Strykeback
            Senior Member
            • Mar 2012
            • 1574

            I always here about this one way in or out but I've watched people at the pistol bench at the range take their glock tool and pop them our every which way when swapping triggers.

            Sent from my SM-G930V using Tapatalk

            Comment

            • #7
              caliberetta
              Veteran Member
              • Jan 2014
              • 2751

              field strip and remove the slide release lever and put it back in. test it again. if it continues to happen, replace the pins and slide release.

              Comment

              • #8
                lakersfan
                Member
                • Apr 2015
                • 499

                Not the locking block and trigger pins. The two tiny pins on the actual trigger. I put some loctite on there for now.

                Comment

                • #9
                  Don the savage
                  Senior Member
                  • Aug 2010
                  • 2094

                  If you are having issues with the trigger shoe itself, contact glock or a glock armorer. This could be a dangerous situation where the safety fails. There are many glock armorers on this board and locally for a quick fix. Loctite is NOT the answer.
                  I support peace through superior firepower.
                  "Para ser libre, un hombre debe tener tres cosas, la tierra, una educacion y un fusil. Siempre un fusil ! (To be free, a man must have three things; land, an education and a rifle. Always a rifle)" -Emiliano Zapata.

                  Originally posted by rsrocket1
                  Of course they are in free territory where they can pick up ammunition at the local 5 and dime without going through a criminal background check. All we get is legalized pot.

                  Comment

                  • #10
                    lakersfan
                    Member
                    • Apr 2015
                    • 499

                    Nothing is broken just some pins backing out. Dry fires fine. Gonna buy a trigger assembly for a 17 I like the smooth trigger.

                    Comment

                    Working...
                    UA-8071174-1