Threaded barrels

[Saym14]

I'd just move out state, say AZ or NV.

[glockman19]

Any particular reason why, or is it just one of those "I feel like fish today" things? It's been repeated multiple times in this thread that Loctite was deemed acceptable by the DOJ for Walther

Yes.

[Saym14]

Any particular reason why, or is it just one of those "I feel like fish today" things? It's been repeated multiple times in this thread that Loctite was deemed acceptable by the DOJ for Walther

where is this proof that loctite is acceptable? its not permanent ?

[FeuerFrei]

Walther p22 barrels are sleeved. The muzzle has threads and protector installed from the factory with thread locker to keep the sleeve/barrel in place.

Thread protector has no knureling or flats for wrench purchase.
No easy disassebly is possible.

The sleeves are attached with the same or similar glue du jour.

Sent using 2 cans and a long string.

[Noonanda]

The Thread protector/ California compliance part came off of mine with a fairly easy turn with a pair of channel locks.
This is how it looks now

[KrisDSA]

where is this proof that loctite is acceptable? its not permanent ?

Well that is how the p22 is legal in CA

[KrisDSA]

Walther p22 barrels are sleeved. The muzzle has threads and protector installed from the factory with thread locker to keep the sleeve/barrel in place.

Thread protector has no knureling or flats for wrench purchase.
No easy disassebly is possible.

The sleeves are attached with the same or similar glue du jour.

Sent using 2 cans and a long string.

there are pics of some CA P22 leaving the factory with the free state sleeve. Only a dozen or so of them