Warren tactical sights

[BoJackUSMC]

Dear members,

Anyone know if this site will fit G19?
I do not see which model it will work or not in website.
Thank you

http://www.skdtac.com/Warren-Tactical-Sight-Tritium-Front-p/wrt.204.htm

[jpm804]

[dsouza411]

I cross-referenced exactly what jpm804 did for you. Went on 10-8, gathered as much information I could possibly find for proper sight heights. Multiple sources confirmed that they will work, with exception for a few. Reading a couple of reviews, some guys had a higher POI on Gen4. His solution for fixing it was moving up to the taller front sight only.
I actually just ordered a set from SKD yesterday for my 19 as well. Only difference, I went with FO front sight.

[tonyxcom]

Not every gun will have the same POI, you just need to start somewhere and adjust as necessary.

The Warren sights are a very good starting point on the 17/19/22/23. Will probably impact too high on a 34/35.

[jpm804]

I actually have a couple of mixed sets of 10-8 rears and WT FO fronts with no issues.

[BoJackUSMC]

Thank you everyone

[BoJackUSMC]

I have Hackathorn for my other Glock with U notch shape rear..
I want to get hackathorn for G19, but cannot seem to find U notch rear sight, only square shape hackathorn.

[BoJackUSMC]

Maybe my google skill might not be that good... but no luck so far..

[jpm804]

I have Hackathorn for my other Glock with U notch shape rear..
I want to get hackathorn for G19, but cannot seem to find U notch rear sight, only square shape hackathorn.

10-8 rears are U shape and serrated which why I went with them instead of warrens also.

[BoJackUSMC]

I have decided to go with Warren Tactical...
Thanks everyone..

[Gasman]

I have decided to go with Warren Tactical...
Thanks everyone..

Before you do that, you might want to check out my reply to your post on the WTB forum. I have the Warren, Ameriglo, and Trijicon HD sights, and I greatly prefer the HD's. They have the U-shaped notch and are nicely serrated.

[nothingextra]

Not every gun will have the same POI, you just need to start somewhere and adjust as necessary.

The Warren sights are a very good starting point on the 17/19/22/23. Will probably impact too high on a 34/35.

^^^^^^ this

Shoot your preferred load.
Most factory sights are regulated to a specific load and 25yds.
Take your impact deviation based on your load and distance and plug it into a calculator.
Order your sights.

It's like a lost art, used to be a normal deal in the 1911 and revolver era.

[Bill Steele]

I can't remember off the top of my head the dimensions/model number for the stock G17, etc. versus the ones for G34/G35. I can go measure my G35 tomorrow morning, I know they need to be taller on the G34/G35.

WT are my favorite AM sights, but I prefer a narrow FO up front. The semi U notch is perfect for me.

Edit update: I measured my G35 FS and it was .230" tall, so the one in your link sounds right for the G19.

[1911whore]

I had warrens on a g19 and have them on a g17. .work great on both..no issues.

[Libertarian71]

I have Hackathorn for my other Glock with U notch shape rear..
I want to get hackathorn for G19, but cannot seem to find U notch rear sight, only square shape hackathorn.

Here you go: http://ameriglo.com/products/glock-u...nt=18234204743

I like the lumigreen/Protector color better than the orange Hackathorns:

http://ameriglo.com/collections/glock/products/glock-protector-sets

http://ameriglo.com/products/glock-uc-tritium-sets?variant=8026796673

Not a big fan of tritium, or of wide front sight blades, but Hackathorn/Protector sights are a decent choice for geezer eyes, and are much better, IMO, than the Trijicon HDs. (Have no use for three-dot sights. I like an all-black rear.)

I think the Dawson Precision all-black rear (.145") and fiber-optic front (.105") set-up are the best Glock sights. (10-8s are nice, too, but I prefer a square notch rear sight.) The Ameriglo Defoor sights (all black) are excellent, too.