Sig P229 .40 conversion to 9 mm?

[nearsightednate]

Hi.

I have a Sig P229 in .40 and was wondering if there is a way to convert it to 9 mm? Will switching the barrel and recoil guide tube work?

Any ideas?

Thanks.
Nate

[ontmark]

Will have to replace the whole top side and get the Mags.

http://www.topgunsupply.com/factory-sig-sauer-barrels/index2.html

Sig P228/229 Replacement Barrel - 9mm
SKU: 34280168

Replacement barrel for your P228 or P229 9mm. These are factory SIGARMS drop-in barrels. Not for use in a 357SIG or .40S&W Slide.

Not worth the cost IMHO

Just buy another SIG

[leelaw]

http://www.barsto.com/category_main.cfm?ID=229&cco=68

Get the 9mm conversion barrel. You'll need to replace the barrel and ONLY the barrel.

[RedDawn]

http://www.barsto.com/category_main.cfm?ID=229&cco=68

Get the 9mm conversion barrel. You'll need to replace the barrel and ONLY the barrel.

Nice, here I thought my bank account was going to be safe this month.

[randy]

You will need mags too.

[ontmark]

http://www.barsto.com/category_main.cfm?ID=229&cco=68

Get the 9mm conversion barrel. You'll need to replace the barrel and ONLY the barrel.

Sorry
I was wrong

I believe you will also need the 9mm recoil spring.

[nearsightednate]

Excellent! Thanks to everyone who responded!

Nate

[pl408]

just did mine and worth the money
you will need 9mm mag
bar sto conversion barrel
and a 15 ld (9mm recoil spring)
I bought the wolff spring and it caused the guide rod to tilt
ended up going with the sig spring and problem went away
topgunsupply.com

[C.G.]

Barsto conversion barrels are good, but on occasion they may need fitting. I have three conversion barrels and only one needed fitting. Barsto will fit them for your for the price of shipping, if you don't feel comfortable fitting your own.