Congratulations. Nice find.
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Buying a Python
Collapse
X
-
Use this toll free number and call Colt customer service, tell them your Python's serial number and they will tell you what year it was made-free service. 1-800) 962-COLT (2658)
Your Python is wearing Generation lll style walnut grips. If the year of manufacture is 1973 and the grips are correct, you've got one of the earliest Gen lll grip releases.Comment
-
A clean box like that adds a lot of value.
That is a pristine gun, you did good."I saved your life, AND brought you pizza" -- MeComment
-
Respect playa....sigpic
PIMP stands for Positive Intellectual Motivated Person
When pimping begins, friendship ends.
Don't let your history be a mysteryComment
-
You did well. Thank you for sharing
Well, there she is. I lost a big chunk of my life savings today to put this beautiful snake in jail.
The serial number per the Proof House indicates it's a 1973 (E59XXX) but the box included a warranty card and manual dated December 1981 and was devoid of any serial number. Regardless, the gun is in truly like new condition... and I've never felt an action so butter smooth.
Comment
-
Join Active Junky for online rebates....$10 to both you and me!
https://www.activejunky.com/invite/238017
Comment
-
Congrats OP, condition looks beautiful...
Final Price???Comment
-
Thanks for the compliments, guys! I can't wait to break this thing out of jail then have my buddy Cerakote it in FDE and put some Hogues on it.

Just kidding. As for the price, I bought this thing as an investment piece. I may end up keeping it as an heirloom, but it may wind up in the Marketplace here one day so I won't say. Let's just say it was a lot, but still cheaper than what I expected to find one in this condition for, legitimate box or not.Comment
-
Comment
-
Very nice looking Python and the action will probably get smoother over time. You've probably already found that the action can be worked with the cylinder swung out - kind of avoids a drag line when doing the "it's so smooth" routine.
Well, there she is. I lost a big chunk of my life savings today to put this beautiful snake in jail.
The serial number per the Proof House indicates it's a 1973 (E59XXX) but the box included a warranty card and manual dated December 1981 and was devoid of any serial number. Regardless, the gun is in truly like new condition... and I've never felt an action so butter smooth.
You mentioned the box is for a 1981 Python and your gun dates to 1973. Attached is a pretty good link to Python grips over the years:
The switch over from the 2nd grip version to 3rd took place in the "mid-1970's". I don't know if 1973 would be included in that description. If the box is from 1981 it could be that the grips were at some point on a gun original to the box. None of this makes any difference regarding the gun, just part of the minutiae of the deal.
I don't quite recall what else would be included, mentioned the "Colt" screwdriver and I'm sure others know better the rest such as warranty card or company literature.GOA Member & SAF Life MemberComment
-
OP, the Colt Python fully locks up the cylinder when the trigger is pulled, not when the hammer is at full cock position like a S&W. So there can be a little cylinder wiggle when the hammer is cocked but before the trigger is pulled. However the cylinder should be fully rotated into position when the hammer in the fully cocked position.
To fully test the lock up you have to very, very slowly cock the hammer, then pull the trigger, If you see the cylinder advance a little when the hammer is pulled then the timing is off.
I had a Colt Python like this and it never gave me a problem, as normal speed cocking of the hammer or pulling of the trigger resulted in enough momentum of the rotating cylinder to fully advance it into the correct position prior to lock up.
Beautiful Python. With the erroneous paperwork and box, it could make one wonder if this also had a refinish. The gun is gorgeous none the less.Comment
-
^
To add to the above just a bit, and this applies on other old style Colts like the OM Trooper, D frames, New Service, etc - with the hammer at full cock but held by the thumb, when the trigger is pressed just enough for the SA sear to clear the SA sear notch you may feel a slight rub through the hammer. That means the 2nd stage of the hand is locking the cylinder, and the SA sear is just clearing the SA sear notch at the right time with just the right engagement/lock up. Of course you won't feel it if you press the trigger and let the hammer drop for real, nor will it be felt in DA mode. And over time it tends to go away a bit as the parts wear in. But if felt now it's a good sign the gun was little used - or that a new hand has been fitted, and there's nothing wrong with that either. But from the looks of the gun I'd expect it to be original and fitted tight.GOA Member & SAF Life MemberComment
Calguns.net Statistics
Collapse
Topics: 1,870,820
Posts: 25,176,338
Members: 358,862
Active Members: 5,396
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 25760 users online. 142 members and 25618 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.


Comment