Cz p01

[gate76]

Has any put the kadett conversion kit on their Cz? Wondering how accurate they are and are they worth the price.
Any comments please use p.m.

Thanks

[Litespeeds]

I have my CZ Kadet II on my CZ 75 BD frame. Very accurate and fun to shoot. It will fit the P01 but not sure if there will be any slight fitting involved.

[Humboldter209]

I run the cz Kadet kit on my cz75b sa and it is a lot of fun to shoot and accurate as well. Not as accurate as a S&W K-22 revolver but still shoots good groups at 15 yards. There was some fitting involved. Have shot Federal, Remmington and Winchester ammo with no issues. Hope this helps.

[TATER313]

Very accurate, will fit the P01.

[Litespeeds]

Tater313 is selling one in the Marketplace if you are interested.

[tbc]

Cz p01

Yup worth it. I am thinking of getting a second Kadet.

It is accurate enough for me from 50 ft




Sent from my iPhone using Tapatalk

[Tok36]

I know of a guy that shoots Bullseye with one and dose very well. I have not heard of accuracy being an issue with the Kadet.

Know issues with the Kadet 2 kit. I am no expert, this is only what i have seen pop up over the last year on the OG CZ forums.

-Light strikes with some ammo. This is sometimes a product of folks lightening up there hammer springs to obtain a reduced weight trigger pull. Some of the time is it the Kadet its self due to the firing pin and firing pin channel.

-Some failure to feed issues have come up from time to time. I am unclear on just how common this issue is. I am also unclear on the cause or causes.

To my knowledge nether of these issues are real common and there are a number of known possible fixes for both.

My Kadet 2 has seen both issues but i have not shot it enough to discern a cause. I have only put about 500 rounds through it. Could have been break in for all i know.

[symbology]

I had light strike issues when using an 11lb main spring. I upped it to 13lbs and zero issues. No feed issues for me and it is accurate and fun to shoot.

[bsumoba]

check this video out...

[TATER313]

Yes what Tok36 said you must use stock hammer strut spring, and it is reliable. with 13 lb spring had several light strikes.