Unconfigured Ad Widget

Collapse

CZ75B Trigger Work

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Phil3
    Senior Member
    • Oct 2008
    • 2249

    CZ75B Trigger Work

    I have a CZ75B single action (SA) that I bought new some years ago. The trigger is somewhat heavy with a lot of creep. Is there anyone in the San Francisco bay area that can rework the trigger, or is there a recommended place I can send it to. I am not too impressed by the accuracy either, so would like to hear of any place that can take the CZ to the next level. I really like the gun, but needs some improvement here and there.

    Thanks.

    Phil
  • #2
    Tok36
    Veteran Member
    • May 2013
    • 3061

    Cajun Gun Works @ http://cajungunworks.com/
    CZ Custom @ http://czcustom.com/
    Automatic Accuracy @ http://automaticaccuracy.net/

    These are the 3 most well knows shops for CZ tuning. I have used CGW and CZ Custom, both shops do a great work. I have only read good things about AA, but i have not used them to date.

    You also have the option to order the parts and install them your self. Here is a parts install guide. It can give you some perspective on what home installation entails.
    Last edited by Tok36; 11-22-2015, 4:07 PM.
    Vive La Exile Machine!!
    Link--> CZ 75B -vs- CZ 75 SP-01 Comparison
    Link--> CGW Type 3 Disco fitting fun
    Link--> What is a CZ Tactical sport?
    Will work for CZ Pics!

    Comment

    • #3
      michael0594
      Senior Member
      • Nov 2013
      • 764

      Send it to cajun gun works or CZ customs. It won't be cheap. If you do send in, you should consider changing out the rear and front sights for better target shooting. OEM sights are horrible.

      Comment

      • #4
        Par5In2
        Member
        • Aug 2015
        • 486

        Stock barrel and slide?

        If you're not impressed with the out of the box accuracy of the 75, I'm not so sure it's the gun.

        Like others have said, Cajun Gun Works will be where you want to get your parts, or where you want to order from.

        As far as the creep, get a disconnector and file it to your liking. Also, a comp hammer will be of great assistance, as well. Good luck with your shooting goals of 2015, young prince. We all gonna make it.

        Edit: Let me help you.

        Comp hammer
        13# hammer spring
        11# recoil
        All the reduced springs they offer; trigger, FP, etc.
        Disconnector
        Last edited by Par5In2; 11-22-2015, 4:08 PM.
        Originally posted by pacrat
        What part of Cuba are you located in, Havana? Or closer to Guantanamo?

        Comment

        • #5
          Phil3
          Senior Member
          • Oct 2008
          • 2249

          Yes, stock barrel and slide. The gun is 100% stock.

          I am probably the limiting factor on accuracy, but I have noted that it will slowly fade in accuracy during the day, and then suddenly, really fall off. Maybe it is me just getting tired. I am not sure how often the barrel should be cleaned, but 150 rounds will see a definite accuracy falloff.

          Compared to the CZ75B, I can shoot my Dan Wesson 1911 Pointman 7 (PM7) much better. The trigger and the sights are much better, so maybe I could do better with better trigger and sights on the CZ.

          Does a trigger job entail machine work or just replacement of parts?

          Oh, at my age, I am hardly a young prince!

          Thank you.

          Phil

          Comment

          • #6
            Old4eyes
            Senior Member
            • Feb 2010
            • 1758

            I found the stock sights on the CZ to be very difficult to see. I swapped out for fiber and it became much easier to shoot.

            Comparing a stock CZ trigger to a Dan Wesson is an apples and oranges type of thing. You can lighten the trigger of a CZ with a fairly simple parts kit. On a SP-01 and on a P-01 I installed the ultralight kit from cajun gun works. It's main function is to reduce the DA pull on those but it does reduce the SA pull as well.

            A very popular and extremely effective upgrade.  Tens of thousands are in service worldwide.  Fixes the minor design issue with the factory firing pin.   Combined with our shock absorbing spring steel retaining pin, reliability is greatly enhanced.  Reduces the heavy factory DA pull weight nearly 50%, yet retains reliable ignition when using our "blue" HS-13 hammer spring. The HS-13 music wire hammer spring is for defense use.   HS-12000 "black" hammer spring will cut the DA about 60% and will set off "most" primers, ideal for range and competition when using Winchester or Federal primers only. Installation Instructions    


            On my SP-01 it dropped about 2 lbs(DA) and 14 ounces (SA) off of the trigger. It does not help creep. I didn't do trigger work with my 75B-SA since the trigger is at 4lb 10 ounce and I can live with that.

            And no, my 75B-SA trigger doesn't match my Dan Wesson CBOB so I am not surprised you find a difference in your pistols. I've got a number of pistols whose triggers don't feel like my Dan Wesson.
            Send Lawyers, Guns and Money - On second thought, hold the Lawyers.

            Comment

            • #7
              Par5In2
              Member
              • Aug 2015
              • 486

              Originally posted by Old4eyes
              I found the stock sights on the CZ to be very difficult to see. I swapped out for fiber and it became much easier to shoot.

              Comparing a stock CZ trigger to a Dan Wesson is an apples and oranges type of thing. You can lighten the trigger of a CZ with a fairly simple parts kit. On a SP-01 and on a P-01 I installed the ultralight kit from cajun gun works. It's main function is to reduce the DA pull on those but it does reduce the SA pull as well.

              A very popular and extremely effective upgrade.  Tens of thousands are in service worldwide.  Fixes the minor design issue with the factory firing pin.   Combined with our shock absorbing spring steel retaining pin, reliability is greatly enhanced.  Reduces the heavy factory DA pull weight nearly 50%, yet retains reliable ignition when using our "blue" HS-13 hammer spring. The HS-13 music wire hammer spring is for defense use.   HS-12000 "black" hammer spring will cut the DA about 60% and will set off "most" primers, ideal for range and competition when using Winchester or Federal primers only. Installation Instructions    


              On my SP-01 it dropped about 2 lbs(DA) and 14 ounces (SA) off of the trigger. It does not help creep. I didn't do trigger work with my 75B-SA since the trigger is at 4lb 10 ounce and I can live with that.

              And no, my 75B-SA trigger doesn't match my Dan Wesson CBOB so I am not surprised you find a difference in your pistols. I've got a number of pistols whose triggers don't feel like my Dan Wesson.
              with a full disco that needs to be fit, comp hammer, hammer spring and polish, I'm sure I can get your CZ pretty damn close to your 1911...
              Originally posted by pacrat
              What part of Cuba are you located in, Havana? Or closer to Guantanamo?

              Comment

              • #8
                Old4eyes
                Senior Member
                • Feb 2010
                • 1758

                Yep, I can probably get my CZ damn close to my 1911.
                Or I can simply pick up one of my 1911's.
                The point is well taken, I can do some work to get there - it's not that important to me.
                The OP might want to go that way and can try doing it himself or send it out for custom work.
                Send Lawyers, Guns and Money - On second thought, hold the Lawyers.

                Comment

                • #9
                  Litespeeds
                  Veteran Member
                  • Jul 2015
                  • 3260

                  My vote is to send it to David at Cajun Gun Works and get a Pro-Package and maybe some better sights. Get will transform your gun and bring it to another level.

                  Comment

                  • #10
                    Par5In2
                    Member
                    • Aug 2015
                    • 486

                    Originally posted by Old4eyes
                    Yep, I can probably get my CZ damn close to my 1911.
                    Or I can simply pick up one of my 1911's.
                    The point is well taken, I can do some work to get there - it's not that important to me.
                    The OP might want to go that way and can try doing it himself or send it out for custom work.
                    Half the price.
                    Originally posted by pacrat
                    What part of Cuba are you located in, Havana? Or closer to Guantanamo?

                    Comment

                    • #11
                      michaelm818
                      Member
                      • May 2014
                      • 239

                      Consider removing the fpb if you want the trigger pull to get as close as possible to your 1911.

                      Comment

                      • #12
                        Bullitt01
                        Veteran Member
                        • Sep 2013
                        • 3905

                        Originally posted by Par5In2
                        Half the price.
                        R U a Smith?

                        Comment

                        • #13
                          schmeky
                          Member
                          • Apr 2011
                          • 114

                          Consider removing the fpb if you want the trigger pull to get as close as possible to your 1911
                          Could you please explain, in more detail, why doing this alone will create a 1911 like SA?

                          Comment

                          • #14
                            jsigone
                            Senior Member
                            • Apr 2006
                            • 1211

                            If you are decent w/ your hands, you can do the work yourself. You are mostly just swapping out parts. Polish job is required in a few areas but is pretty simple with a cheap dremel and polishing compound.

                            The creep removal is done by swapping out the hammer. The new hammer and adjustable sear is tuned for each other.

                            Comment

                            • #15
                              Par5In2
                              Member
                              • Aug 2015
                              • 486

                              Originally posted by jsigone
                              If you are decent w/ your hands, you can do the work yourself. You are mostly just swapping out parts. Polish job is required in a few areas but is pretty simple with a cheap dremel and polishing compound.

                              The creep removal is done by swapping out the hammer. The new hammer and adjustable sear is tuned for each other.
                              Wrong, the creep is rectified with a full disconnector that is file fit to the specific gun. Hammer just gets you a quicker and lighter break in SA.

                              Originally posted by schmeky
                              Could you please explain, in more detail, why doing this alone will create a 1911 like SA?
                              This should get interesting. lol!!
                              Originally posted by pacrat
                              What part of Cuba are you located in, Havana? Or closer to Guantanamo?

                              Comment

                              Working...
                              UA-8071174-1