Unconfigured Ad Widget

Collapse

Hand-fitted trigger?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • madoka
    Senior Member
    • Dec 2012
    • 2039

    Hand-fitted trigger?

    I saw this in the marketplace:

    This particular firearm has an Agency Arms hand-fitted flat face trigger (not drop-in) that has minimal pre-travel, clean, crisp break at around 4 lbs (on my scales) with all OEM parts other than the trigger shoe and plunger safety spring.
    What the heck is a "hand-fitted" trigger and how is it any different than a drop in?
  • #2
    kappatxl
    Member
    • Sep 2014
    • 106

    I will respond because I am the OP of this marketplace post. Hopefully this won't be construed as a ploy to promote my post.

    A "hand-fit" trigger is one that was sent to the gunsmith, and had its components filed and polished specific to the firearm to achieve the best performance. It is no different than buying a ghost edge connector, which requires gunsmith or amateur filing to be fitted with a trigger of your choosing.

    The price difference they charge is nominal, $200 (plus return shipping) for the "fitted" trigger and $150 for the drop-in. I have both in different guns and the difference is quite noticeable.

    Thanks.

    Comment

    • #3
      TAP4M1A
      Junior Member
      • Feb 2014
      • 43

      Originally posted by madoka
      I saw this in the marketplace:
      What the heck is a "hand-fitted" trigger and how is it any different than a drop in?
      Hand fitting refers to the act of custom fitting a trigger system so that DA and SA pre-travel and over-travel are removed/minimized and trigger SA reset and trigger DA resting position are optimized. Trigger pull weights are also lowered during this process of polishing and timing. It's not just the actual trigger swap; that gives all these benefits, its a complete action/trigger job including polishing and timing of the internals. This would not be for the weekend shooter with no smithing training or skills. This is skilled work on the OEM parts, NOT DROP-IN aftermarket parts.

      Comment

      • #4
        madoka
        Senior Member
        • Dec 2012
        • 2039

        Thanks for those definitions. Turns out that I own a couple of hand-fitted triggers and didn't even know it. I had a couple of M&Ps "hand-fitted" with Apex triggers by the same gunsmith that does work for the LAPD pistol team.

        Comment

        • #5
          9mmepiphany
          Calguns Addict
          • Jul 2008
          • 8075

          Originally posted by madoka
          Thanks for those definitions. Turns out that I own a couple of hand-fitted triggers and didn't even know it. I had a couple of M&Ps "hand-fitted" with Apex triggers by the same gunsmith that does work for the LAPD pistol team.
          I think you still misunderstand.

          Unless they have changed, the folks who usually work on LAPD M&Ps are armorers, not gunsmiths. Just about anyone can hand-fit an Apex trigger in a M&P

          There is a big difference between fitting a trigger and balancing the action to optimize the fit of the trigger
          ...because the journey is the worthier part...The Shepherd's Tale

          Comment

          • #6
            madoka
            Senior Member
            • Dec 2012
            • 2039

            Originally posted by 9mmepiphany
            I think you still misunderstand.

            Unless they have changed, the folks who usually work on LAPD M&Ps are armorers, not gunsmiths. Just about anyone can hand-fit an Apex trigger in a M&P

            There is a big difference between fitting a trigger and balancing the action to optimize the fit of the trigger
            Well, since he charged me extra for polishing and tuning when installing, I'm assuming that's what he did. I just never heard it called hand-fitting before. I always referred to it as tuning. Plus, he works on the LAPD Pistol team's M&Ps; not normal LAPD. He told me he worked on their triggers/actions.

            Comment

            • #7
              AreWeFree
              Veteran Member
              • Jan 2013
              • 4558

              Hand fitted to me means an actual gunsmith used his extensive knowledge to safely fit and perfect engagement surfaces, likely with stones and files, not rags and polishing compounds.

              Gunsmith would be like an engineer, armorer would be like a mechanic.

              Comment

              • #8
                saki302
                Calguns Addict
                • Oct 2005
                • 7193

                "Hand Fit" is a term usually used for things like a 1911 trigger- where a good oversized aftermarket trigger needs to be stoned down on the top and bottom surfaces for a perfect fit.

                I doubt a Glock /M&P trigger requires "Hand Fitting". More like hand-tuning or assembled by hand

                -Dave

                Comment

                • #9
                  JTROKS
                  I need a LIFE!!
                  • Nov 2007
                  • 13093

                  If I do a Glock trigger as in install a custom trigger kit complete with polished FP block, polished/lightened striker, and +/- spring kit, I still need to inspect the parts and polish areas that were missed at the factory. If it has trigger stop and take up screw adjustments those can take a bit of time to dial in just right, hence the extra.

                  Now if you mean each OEM parts are polished, trigger bar relocated on the trigger, polish everything and install set screws and springs then it qualifies as hand fitted.

                  Huh? What's the difference between the 2? Not really sure because I have to pay attention to the parts I'm installing to get the desired end result and still function reliably and safely.
                  The wise man said just find your place
                  In the eye of the storm
                  Seek the roses along the way
                  Just beware of the thorns...
                  K. Meine

                  Comment

                  Working...
                  UA-8071174-1