DELETE
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
DELETE
Collapse
X
-
Gen 2 and 3 barrels are interchangeable. Spend the extra $40 and get the KKM barrel though. Best place is usually directly off their site. G17 mags in a G22 is not problem...it's the same frame. Some people want to change springs/extractors. I run 40>9mm barrel in my G35 using G17 mags and the stock extractor w/no problems.
Some people get away with stuffing 9mm in their .40cal mags. It works, but I wouldn't do it if you needed reliability.
NRA Benefactor MemberComment
-
Most folks have problems using the .40 mags with 9mm. I could never get through a full mag without FTFs. I don't know about the Gen 2, but the stock extractor in Gen 3s work perfectly fine with a 40-9 conversion. I've used Lonewolf's 40-9 conversion in a G27, G23 & G22 and never had a problem.Comment
-
On the Gen2 (while you are shopping) if you like to fill up the moon shaped opening on the mag-well: http://www.pearcegrip.com/Products/GLOCK/PG-FML
Oh, on the 40sw caliber, I do not think the Gen2 barrels had good support as the current generation barrels. So check you brass if when you fire them, if they have that smile bulge, get another barrel or lower loads.
Consider a 34 slide for the longer radius, of course more expensive than just a conversion barrel.Comment
-
If you are selling, I am a cash buyer.
sigpic
PIMP stands for Positive Intellectual Motivated Person
When pimping begins, friendship ends.
Don't let your history be a mysteryComment
-
Congrats on the pickup. My Glock 17 was a Washington State Trooper trade-in. Couple years and few K rounds through her and she shoots even better than when I first bought her.Comment
Calguns.net Statistics
Collapse
Topics: 1,870,772
Posts: 25,175,756
Members: 358,862
Active Members: 5,399
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 28946 users online. 121 members and 28825 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment