Unconfigured Ad Widget

Collapse

Sig Sauer P6

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • K.G.B.
    Senior Member
    • Jul 2008
    • 1455

    Sig Sauer P6

    I got this P6 in a trade a couple of years back, finally took it to the range last week and had a bunch of light strikes with it. I guess whoever owned it before me bobbed the hammer and didn't change the springs to heavier. So my question is should I send it to sig or just order a new hammer and replace it myself. As it sits it's not very usable it will give you 3-5 light strikes on a single mag no matter what the ammo is.
    Last edited by K.G.B.; 07-27-2015, 6:37 PM.
    Someday someone may kill you with your own gun, but they should have to beat you to death with it because it is empty.
  • #2
    dc2allday
    Veteran Member
    • Jul 2011
    • 3559

    Send to Sig for father's day tune up!
    sigpic
    Originally posted by gun toting monkeyboy
    You did ask. They were only following your instructions. Next time be a bit more careful in how you phrase your posts. If you give people a straight line like that, this is about the level of response you are bound to get. Just be glad you didn't post "Date this rifle"... Those pictures are usually very disturbing.

    -Mb

    Comment

    • #3
      AreWeFree
      Veteran Member
      • Jan 2013
      • 4558

      Originally posted by dc2allday
      Send to Sig for father's day tune up!
      ^^^

      Comment

      • #4
        QXSOUP
        Senior Member
        • Sep 2011
        • 989

        Originally posted by dc2allday
        Send to Sig for father's day tune up!
        agreed!!! You get new springs and night sights for 99 bucks. They will charge you for the hammer however. It should be ~50 bucks and they will install it for free.
        WTB: Sig P245 or P220 Compact

        STOP THE TUNNELS

        Comment

        • #5
          K.G.B.
          Senior Member
          • Jul 2008
          • 1455

          Cool sounds like a good plan!
          Someday someone may kill you with your own gun, but they should have to beat you to death with it because it is empty.

          Comment

          • #6
            eternoplacer
            Member
            • Nov 2013
            • 330

            I hate dealing with shipping and waiting, just order new hammer and spring and do it yourself.
            The wait will be shorter, and the parts around $45.95 for the hammer and $6.95 for the spring at TOP Gun Supply.
            Last edited by eternoplacer; 06-17-2015, 11:26 PM.

            Comment

            • #7
              AreWeFree
              Veteran Member
              • Jan 2013
              • 4558

              Originally posted by QXSOUP
              agreed!!! You get new springs and night sights for 99 bucks. They will charge you for the hammer however. It should be ~50 bucks and they will install it for free.
              Tell them the problem you're having, ask if they'll replace the part complimentary while it's being serviced.

              If you have another Sig in need of a tune-up, you can send both at once and they may cut you a better deal.

              Comment

              • #8
                K.G.B.
                Senior Member
                • Jul 2008
                • 1455

                Just went to the website all they seem to have is sig Sauer barrels
                Originally posted by eternoplacer
                I hate dealing with shipping and waiting, just order new hammer and spring and do it yourself.
                The wait will be shorter, and the parts around $45.95 for the hammer and $6.95 for the spring at TOP Gun Supply.
                Someday someone may kill you with your own gun, but they should have to beat you to death with it because it is empty.

                Comment

                • #9
                  bsg
                  I need a LIFE!!
                  • Jan 2009
                  • 25954

                  Originally posted by eternoplacer
                  I hate dealing with shipping and waiting, just order new hammer and spring and do it yourself.
                  The wait will be shorter, and the parts around $45.95 for the hammer and $6.95 for the spring at TOP Gun Supply.
                  TGS (Top Gun Supply) is gtg. i've bought many parts from them over the years without a problem and their reputation is great. you can also pick up original factory OEM grips from TGS @ $22.95 and these grips are not easy to find elsewhere. i keep an extra set for my P225. i suggest you get a set; their ergonomics are great.

                  rather than getting a P225 hammer, i would most likely begin searching for a used P6 hammer to keep the integrity of the pistol as original; personal preference. as eternoplacer has noted, you can get a hammer (P225) for your P6 @ $45.95 via TGS.

                  Guns for sale. Gun Parts for Sig Sauer, Heckler & Koch, AR-15, Glock, 1911 parts. Your top gun supply superstore!

                  Comment

                  • #10
                    bsg
                    I need a LIFE!!
                    • Jan 2009
                    • 25954

                    Originally posted by K.G.B.
                    Just went to the website all they seem to have is sig Sauer barrels
                    go to the TGS site and choose GUN PARTS at top of page. then choose SIG SAUER PARTS on next page. then choose SIG SAUER GUN PARTS BY MODEL. then choose P225. this will take you to parts that you want to look at and i believe there are about 5 pages of parts.

                    Guns for sale. Gun Parts for Sig Sauer, Heckler & Koch, AR-15, Glock, 1911 parts. Your top gun supply superstore!

                    Comment

                    • #11
                      StefanJanowski
                      Senior Member
                      • May 2012
                      • 591

                      Sell it to me. Ill handle the waiting
                      http://www.1911addicts.com/showthrea...911-addicts...

                      Message me if you have the following:

                      PreLock Smith & Wesson Revolvers
                      Performance Center 1911

                      XDm 5.25 40sw

                      10mm ANYTHING , AMMO, PISTOLS, ETC

                      Comment

                      • #12
                        nbirnbaum2
                        Senior Member
                        • Aug 2011
                        • 791

                        My p6 is on its way back... sent out last friday will arrive tomorrow... 7 day turn around with shipping. Cant beat that. also GET THE SRT UPGRADE for $59 while it is in for the spa treatment. You will be very happy you did.

                        Also the $99 spa promo comes with a FREE FEED RAMP POLISH.... this is a big deal for HP ammo in P6's
                        Last edited by nbirnbaum2; 06-18-2015, 8:56 AM.

                        Comment

                        • #13
                          eternoplacer
                          Member
                          • Nov 2013
                          • 330

                          Originally posted by StefanJanowski
                          Sell it to me. Ill handle the waiting
                          Noooooo sell it to me I'll fix it!!!!
                          What ever you do it will be a nice gun once you are done with it.

                          Comment

                          • #14
                            nbirnbaum2
                            Senior Member
                            • Aug 2011
                            • 791

                            Originally posted by eternoplacer
                            I hate dealing with shipping and waiting, just order new hammer and spring and do it yourself.
                            The wait will be shorter, and the parts around $45.95 for the hammer and $6.95 for the spring at TOP Gun Supply.
                            The 225/p6 parts kit is on backorder. Its $25 bucks. For an older gun he should swap ALL the springs and the roll pins.

                            Sig will currently do this for $99 Im posting retail cost next to some parts

                            full disassemble
                            sonic clean
                            install new springs, roll pins $28.95---- if you can find one
                            new night sights $119.95
                            feed ramp polish $29.95

                            thats one hell of a deal !
                            Last edited by nbirnbaum2; 06-18-2015, 9:43 AM.

                            Comment

                            • #15
                              eternoplacer
                              Member
                              • Nov 2013
                              • 330

                              ^^^^ Do it, all new guts sounds great!

                              Comment

                              Working...
                              UA-8071174-1