Glock help

[jkcerda]

will the MAG for a Glock 22 fit the Glock 35?

looking at getting a few mags as we speak, have not found much ionfo regarding a difference between the 2

[glk-21]

yes the G22 mag will work in the G35

[Greg-Dawg]

FYI: The G22 magazine will also fit the G23 and G27. Pretty much the standard or full size mags will fit the same caliber Glock guns.

[1911whore]

yup

yup, as will t he g17 mag, now go get a 9mm conversion barrel

[glockk9mm]

yup, as will t he g17 mag, now go get a 9mm conversion barrel

can the original factory g17 barrel be put in? Or does it have to be an aftermarket?

[SJgunguy24]

can the original factory g17 barrel be put in? Or does it have to be an aftermarket?

Are you asking about a G17 barrel in a G22 slide?

[glockk9mm]

Are you asking about a G17 barrel in a G22 slide?

yes....

And to the op sorry not trying to jack your thread.

[SJgunguy24]

Your gonna want a conversion barrel. The hole in the slide is larger on the 22 and the conversion barrel has a thicker wall to make up the difference.

I guess in a pinch it would work, but there will be some slop.(loose fit)

[Greg-Dawg]

Personally, I'd stay away from any modifications to your Glock unless you want it to work 60-75%.

I have a 40-9 conversion barrel on my G35 and it jams a lot:




As you can see, the 9mm conversion barrel has to fit the slide's .40S&W barrel hole:

*Yes I took this without being in front of the Glock.

[savasyn]

The G22 and G35 have the same exact frame as far as I can tell, so yeah, the mags are interchangeable.

I've had very good luck with the 9mm conversion on my G35. It works 100% with factory ammo and only recently had some trouble with my lightly loaded match ammo.

[glockk9mm]

I kinda figured the best thing would be a conversion barrel instead of a factory one.

[jkcerda]

thanks alot guys, sorry I did not get back here sooner.

ill be ordering some mags then

[nick]

The G22 and G35 have the same exact frame as far as I can tell, so yeah, the mags are interchangeable.

I've had very good luck with the 9mm conversion on my G35. It works 100% with factory ammo and only recently had some trouble with my lightly loaded match ammo.

WHich conversion barrel do you use? DId you have to change extractor/ejector to make it work?