Unconfigured Ad Widget

Collapse

9m.m. barrel

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ArtP
    Junior Member
    • Nov 2013
    • 87

    9m.m. barrel

    I have a Springfield 38.super and I would like to get a 9m.m. barrel looking for any recommendations.
    Thanks
  • #2
    JTROKS
    I need a LIFE!!
    • Nov 2007
    • 13093

    You need to verify what ramp cut you have. Then you new to decide if you want a drop in or a hard fit. Then you'll need to decide what brand barrel to get. If you get a drop in you may still need to get a gunsmith to do minor fitting. Hard fit will definitely need a gunsmith that knows 1911 barrel fitting. With all that said, for what purpose is the 9mm barrel for? What is your accuracy expectation?
    The wise man said just find your place
    In the eye of the storm
    Seek the roses along the way
    Just beware of the thorns...
    K. Meine

    Comment

    • #3
      ArtP
      Junior Member
      • Nov 2013
      • 87

      Just want to use as a plinker and use a less expensive ammo

      Comment

      • #4
        Bob Hostetter
        Senior Member
        • Oct 2005
        • 1291

        You may have to change the extractor, the rim diameter is different between the two.

        Comment

        • #5
          Pardini
          Senior Member
          • May 2014
          • 1204

          I just put a 9 mm Barstow in a 38 super Kimber Pro Carry. It was the drop in or semi fit barrel. Took just a tad of fitting with a stone. Works great, didn't have to do anything with the extractor. It was a little longer than they advertised so I'll have to take off about .160".
          Originally Posted by OCEquestrian View Post
          Excellent! I am thinking about it as well and I only have 4 points and an unfortunate "match bump" up to expert classification where I am far less "competitive" with my peers there.

          Comment

          • #6
            5ZS
            Senior Member
            • Mar 2014
            • 1047

            That's a .38 super Mil-Spec? Sell it (easy sell I am guessing, because those are difficult to find) and get the 9mm Loaded.
            Difference will be pretty much going to be the same money you are putting into the gun.

            Back to the barrel conversion...I would go hard fit (why not upgrade), you save in ammo eventually.
            +1, confirm your frame feed ramp.
            Don't forget a link & link pin. Also a new barrel bushing.
            Magazine -> go Tripp.
            Should be the same recoil spring weight (14# I believe), but might as well get a spare as you shop.
            Try the ejector last, might get away with the .38 super ejector.

            Barrels: Bar-Sto, Kart, KKM, Wilson Combat, Nowlin, all quality (all the same, it's about the fitting) and will be $150+ just for the barrel. Fit it yourself or add more for a Smith.

            Just to plink, I would trade up to a Loaded...but me - I like to upgrade . Adds up to convert it properly.

            But I did popped a 9mm RIA barrel into my neighbors RIA .38 super (that is it) and it actually ran just fine through 50 rounds. Now that is a cheap conversion, haha.

            Good Luck.

            Comment

            • #7
              Sunday
              Calguns Addict
              • Jan 2010
              • 5574

              (mm 1911s are the cats meow nothing nicer.
              California's politicians and unionized government employees are a crime gang that makes the Mexican drug cartels look like a Girl Scout Troop in comparison.

              Comment

              Working...
              UA-8071174-1