Unconfigured Ad Widget

Collapse

Aiming for accuracy

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bootcamp
    Senior Member
    • Mar 2006
    • 1019

    Aiming for accuracy

    Last night my buddy and I took our guns target shooting. He brought his 226 and I had my S&W 645 .45.

    We shot the 226 first. 115gr. Remington hollow points. First time shooting it for me and for the first 35 shots I could not get any kind of grouping at all at a distance of 15 yards. When I shoot, I lock out my left arm (lefty) and grip my right hand over my left hand using a little bit of pressure. I could not get the x-ring. After the 35th shot, I decided to slack my left arm and not lock it out as I normally would. I finally got into the black and a little better with each shot. I don't get it. Can someone explain?

    After 50 rounds each on the 226 I pulled out the S&W .45. I am more familiar with this gun compared to the 226. Winchester WB .45 230gr. I lock out my left arm and pull back with a little pressure with my right. Good 3.5" grouping at 15 yards and I was very happy with that. I almost thought I couldn't aim anymore with the 226.

    I thought the 226 was a highly accurate pistol. What do I need to know to shoot it accurately?

    Thanks in advance.

    BTW: since this is somewhat of a range report. We were at Target Masters in Milpitas. We were shooting next to a bunch of first time shooters. There were a couple of first timers that were with their buddies that were very safety oriented and were very cautious of that. Then there was a couple of other parties that were there that didn't have a friggin clue. Boyfriends and girlfriends kinda chatting and laughing while holding the pistol and often turning their bodies past the 90 degree mark with their finger on the trigger and the barrel pointing at the next lane divider. Make sure to tell the range master if you see this crap. Made me nervous.
    Last edited by bootcamp; 06-30-2006, 10:46 AM.
    Originally posted by ar15barrels
    Lube helps whenever you are trying to get something into a tight hole.
  • #2
    onley11
    Member
    • Jan 2006
    • 224

    Souds like you're flinching with a new gun, maybe it's harder to flinch for you with your elbows flexed. The first position you described sounds like a proper weaver grip, and the second can (and often is) described as a modified weaver. I started using that grip in action pistol as it seems to reduce recoil and muzzle flip for some reason. I think the two flexed elbows make the recoil more linear and allows the gun to flip less. I first saw an extreme example of this when a navy seal was at a match and I though, "what the hell is this silly f-er doing?" then it seemed to work for him, so I tried it, and it actually works pretty well.

    One thing to help with the flinch, other than the standard dud load drill, is to put your non firing index finger knuckle under the triggerguard and apply pressure up while you're breaking the shot, that provides resistance to the flinch reaction, and also makes you think about something else. Another good habit is while you're staring at the front sight(you are, aren't you?) you want to see the muzzle blast and the front sight leaving the target, keep your eyes open and follow thru till you gun quits moving, you're not done till the bullet hits the target and the slide goes home after the shot. If you see the orange flash with the target behind the front sight while focusing on the front sight, you hit the target.

    Hope this helps.
    Last edited by onley11; 06-30-2006, 11:12 AM.

    Comment

    • #3
      bu-bye
      Veteran Member
      • Oct 2005
      • 2835

      I'm very picky about groups. I like them small and tight. I never lock my arms while shooting. Keeping them unlocked allows for faster followup shots. With your shooting hand you only want to grip the gun enough to hold onto it so it does not fall out of your hand while your not shooting. Using your non-shooting hand, wrap it around your shooting hand and the pistol and squize your shooting hand into your gun. The point is to not stress your shooting hand muscles and just allow the trigger finger to work. Just get your trigger finger to move in your shooting hand. You should not be trying to hold onto the gun with your shooting hand, that is what your other hand is for. Relax your shooting hand and just focus on pulling that trigger as smooth as you can. One trick I just learned is to put a penny on top of the slide (if flate on top) and pull the trigger without having the penny fall. This may sound odd but i have found that people who play musical insturments like the guitar are better shooters. The reason is their hand muscles have been trained to function independently so when I tell them to just pull their trigger finger they are able to do it. Non musical players have a harder time with muscle control but they can shoot just as well if not better. Also remember to dry fire the hell out of your snap caps. Pick a spot on the wall or put up a picture and do very slow smooth shots until your sights stay one target. When the trigger is pulled your sights should not move from your point of aim. Remember this too......recoil is not going to hurt you. Only with lots of live fire training will you become comfortable with the recoil and sound of the shot. No amount of yelling or coaching a new shooter not to flinch is going to work. Its somthing the shooter must overcome in their own time. I have trained a lot of people that the flinching just can not be delt with any other way.

      Good luck
      "Calling an illegal alien a "undocumented worker" is like calling the drug dealer hanging around outside your kid's school an "unlicensed pharmacist."

      Comment

      • #4
        TMC
        Senior Member
        • Oct 2005
        • 2348

        Go to Shooting USA and check out the Pro Tips. Doug Koenig and Todd Jarrett have grip and trigger control tips for Autos, Jerry is he last word on Revolvers and Mike Voight is the 3-gun guy.

        where are my pistol mags?

        Comment

        • #5
          bootcamp
          Senior Member
          • Mar 2006
          • 1019

          Originally posted by bu-bye
          I'm very picky about groups. I like them small and tight. I never lock my arms while shooting. Keeping them unlocked allows for faster followup shots. With your shooting hand you only want to grip the gun enough to hold onto it so it does not fall out of your hand while your not shooting. Using your non-shooting hand, wrap it around your shooting hand and the pistol and squize your shooting hand into your gun. The point is to not stress your shooting hand muscles and just allow the trigger finger to work. Just get your trigger finger to move in your shooting hand. You should not be trying to hold onto the gun with your shooting hand, that is what your other hand is for. Relax your shooting hand and just focus on pulling that trigger as smooth as you can. One trick I just learned is to put a penny on top of the slide (if flate on top) and pull the trigger without having the penny fall. This may sound odd but i have found that people who play musical insturments like the guitar are better shooters. The reason is their hand muscles have been trained to function independently so when I tell them to just pull their trigger finger they are able to do it. Non musical players have a harder time with muscle control but they can shoot just as well if not better. Also remember to dry fire the hell out of your snap caps. Pick a spot on the wall or put up a picture and do very slow smooth shots until your sights stay one target. When the trigger is pulled your sights should not move from your point of aim. Remember this too......recoil is not going to hurt you. Only with lots of live fire training will you become comfortable with the recoil and sound of the shot. No amount of yelling or coaching a new shooter not to flinch is going to work. Its somthing the shooter must overcome in their own time. I have trained a lot of people that the flinching just can not be delt with any other way.

          Good luck

          Great, thanks for the info. Something new I can practice!!

          But one thing still gets me. Why can I shoot my .45 auto much more accurately than the 226? I figured I can shoot the 226 equally to my .45 auto. Does 9mm fire that much differently?

          Thanks.
          Originally posted by ar15barrels
          Lube helps whenever you are trying to get something into a tight hole.

          Comment

          • #6
            PistolKidd
            Member
            • Jan 2006
            • 198

            Grip has very little to do with accuracy in timed single shot situations..
            you could shoot with just 3 fingers and still maintain a reasonable group... the main advantages to proper grip are when you are trying to do followup shots or need to bring the sights onto another target.. the gun doesnt know if you're holding it soft or hard.. if you're lined up and dont disturb the sight picture when you squeeze, the bullet will already have exited the gun by the time recoil effects the accuracy..

            honestly, you're probably flinching or doing something in anticipation of the recoil.. the only thing i can imagine that you're experiencing when you're locking your elbows is that you're not allowing your arms to act as 'shock absorbers'.. this might give you the sensation of more recoil as the impulse is now allowed to travel laterally down your arms and into your body.. bending your elbows allows teh gun to "jump" more and you end up dissipating more of the recoil with your arms as they will naturally bend..

            as for the accuracy with the 1911.. well i cant explain that one.. but ive seen the same thing happen.. ill give my friends my sig and 1911..tehy easily shoot better wtih the 1911.. i dunno.. i can shoot both fairly well, as my groups are smaller on my 1911 but it has a better barrel, better sights, and a better trigger..so its' not fair to compare..

            9mm has a shorter but snappier 'impulse'.. the .45 has a larger, but less violent push.. tahts the only way i can describe the recoil between the two..

            Comment

            • #7
              onley11
              Member
              • Jan 2006
              • 224

              It's because you are used to your 45 and have used it more than the 226. You are comfortable with it and confident. I can shoot a 220, a full sized hk, a glock 21, and a smith and wesson 625(45acp revolver) with no flinch whatsoever. But a 1911 45 acp I have to really watch myself, or I start dumping rounds 6-8 inches low at 10-15 yards. And I don't flinch with a 3" 357 mag, or titanium frame 38+p with scanduim cylinder(I don't particularly like them, but only pain, no flinch.) It's just what you react to. Some people have issues with snappy, quick recoil, and some have more problems with a slower, heavier recoil. (quick= light snubby revolver, slower 12=gauge)

              But grip does have an effect on accuracy if you are fighting a flinch. Sure I can shoot my glock 19 with two fingers and a thumb, but I don't flinch with it, and if I did do that, I just might develop one. If I do catch myself start to flinch, and I can't stop, I'm done shooting for the day, and I come back another day to try again. I still can't shoot a Beretta M9 for crap, I qualified expert with it, but just by the skin of my teeth. Some people and some guns just don't like each other. I used to be that way with glocks in my youth (like 15 years ago) but I was forced to keep trying with them, and for me, a house gun is either going to be a revolver, a long gun, or a glock(ok,all three ).

              But seriously, if you can keep your front sight post in view, on the target, while the muzzle flash pops and the front sight kicks up, you are doing good. This is termed a "flash sight picture" and it is what allows high level practical shooters and rifle competitors to call their shots without seeing the holes. And if you fark up, you know it. An embarrasing method to also figure out what is happening is to stick a laser on the gun and everyone next to you can see your flinch or any other movement as you break you shot. One of only two or three things a laser on a gun is good for. (intimidation and submachine guns being the other two) Oh and being pimpy(IR lasers are different, they are cool, for their own reasons )

              Originally posted by bootcamp
              Great, thanks for the info. Something new I can practice!!

              But one thing still gets me. Why can I shoot my .45 auto much more accurately than the 226? I figured I can shoot the 226 equally to my .45 auto. Does 9mm fire that much differently?

              Thanks.

              Comment

              • #8
                JiminCA
                Member
                • Oct 2005
                • 122

                Sounds from your description like you're doing the weaver a little unconventionally. The normal "push-pull" (assuming you're lefthanded) is to push with your left and pull with the right, creating isometric tension. It can be very accurate. Also, how tightly you squeeze the grip should be something like 60% right (weak) hand and 40% left (strong) hand, or even better 70-30 (the description above was good btw). A tense trigger hand makes it hard to execute a smooth pull. I haven't had anyone ever tell me to lock an elbow. In the classic weaver i think you'd still be just slightly broken at the elbow but I don't know for sure.

                Grip and grip tension DO affect accuracy, especially on revolvers. This is because the revo begins to recoil before the bullet leaves the barrel. (If you don't believe this look at how tall the front sights are on long barrelled revos - they result in a significant downward cant). I've been able to change the poi of a revo just by changing my grip. I've also tightened up my revo grips by making my grip location and tension more consistent.

                In a semi I haven't noticed such large effects - probably because semiauto barrels tend to be a lot shorter.

                I use an isometric stance and hold nowadays but still use the 60-40 weak/strong grip tension. And I revert to a weaver-ish hold whenever a match requires longer, accurate shots.

                If your grip and stance don't feel comfortable (ie you have to really contort to get there) you'll never be able to repeat. It needs to be something that your body can replicate.

                Do the dry-fire practice. You should be able to trip the trigger without disturbing the sights. Even a little jiggle when the hammer or striker falls will affect your accuracy.

                As I've advanced as a shooter, I've come to realize that trigger control is as much, if not more important, than sight picture.

                Just my .02
                (edited to fix my left-right screwup in the grip description)
                Last edited by JiminCA; 07-01-2006, 12:03 PM.
                Not "inCA" anymore.....

                Comment

                • #9
                  onley11
                  Member
                  • Jan 2006
                  • 224

                  Yup, trigger control is where it's at. The flash sight picture is to insure you didn't screw up your trigger control at the last, and most important, instant(and incidentally, it makes you focus on something else, which can help )

                  I tend to flinch as the hammer(striker) is in motion, so other people can't see the finch unless I run dry, and even then it's small, but there, if I do it.

                  Comment

                  Working...
                  UA-8071174-1