Unconfigured Ad Widget

Collapse

M & P .45 Problems

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ROSSERACER
    Junior Member
    • Feb 2015
    • 13

    M & P .45 Problems

    Has any one had issues with while the slide is "racked" after finishing a magazine, after removal of spent mag & smacking a loaded one in the slide will release, instead of having to pull slide to arm. I have done some things to the gun like apex trigger, but don't remember if it did that prior. A buddy says this is not normal & should be fixed. I don't see issue with it, because it ready to fire with out extra step. however DON"T want to blow my hand off. Any thought or info would be GREATLY appricieded
  • #2
    himurax13
    Veteran Member
    • Aug 2009
    • 3895

    This is normal for almost all pistols. I wouldn't worry about it.

    How exactly would you blow your hand off?
    Originally posted by Bumslie
    HK - the best 600 dollar gun, 900 dollars can buy.
    Originally posted by Sleighter
    Getting legal advice from a gun salesman, is like getting medical advice from a janitor at a hospital. Both make about the same per hour and both prove that being around something all day doesn't make you an expert.

    Lifetime NRA member.

    Comment

    • #3
      b_k
      Member
      • Apr 2009
      • 179

      It's common on M&P's (and Glocks and some 1911's and probably on a bunch of guns) to have the slide go home if you seat the magazine hard enough with the slide locked back.

      If you don't want to blow your hand off, don't put your finger on the trigger during the reload

      Comment

      • #4
        Legasat
        Intergalactic Member
        CGN Contributor - Lifetime
        • Mar 2009
        • 4151

        Most pistols will do this if you smack it hard enough.
        ..

        .........STGC(SW)


        SAF Life Member

        sigpic
        NRA Benefactor

        Comment

        • #5
          k1dude
          I need a LIFE!!
          • May 2009
          • 16304

          It's normal. Some guns do it more than others. M&P's are known to do it more than some.

          It's called a "birthday bump" for those that like the fact it does that. If you're a competitor, it can really speed up your reloads.

          But for self defense, don't rely on it bumping every time. It's not a 100% occurrance. So you have to still rely on proper training and manipulation.
          "Show me a young conservative and I'll show you a man without a heart. Show me an old liberal and I'll show you a man without a brain." - Sir Winston Churchill

          "I would remind you that extremism in the defense of liberty is no vice! And let me remind you also that moderation in the pursuit of justice is no virtue!" - Senator Barry Goldwater

          Comment

          • #6
            saudadeii
            CGN/CGSSA Contributor
            CGN Contributor
            • Dec 2012
            • 3474

            It's not "normal" as it's not an intended feature. S&W provides a warning in the manual.

            "WARNING: DO NOT USE EXCESSIVE UPWARD FORCE WHEN INSERTING A LOADED MAGAZINE INTO THE PISTOL. EXCESSIVE UPWARD FORCE COULD CAUSE THE SLIDE TO MOVE FORWARD, CHAMBERING A ROUND AND MAKING THE PISTOL READY TO FIRE."

            However, it's is common. My FS and Compact 9's do it but not consistently. I have to really bang them. AFAIC, it's not a problem.
            My Marketplace Feedback: https://www.calguns.net/forum/market...k#post54003245

            Comment

            • #7
              himurax13
              Veteran Member
              • Aug 2009
              • 3895

              Originally posted by saudadeii
              It's not "normal" as it's not an intended feature. S&W provides a warning in the manual.

              "WARNING: DO NOT USE EXCESSIVE UPWARD FORCE WHEN INSERTING A LOADED MAGAZINE INTO THE PISTOL. EXCESSIVE UPWARD FORCE COULD CAUSE THE SLIDE TO MOVE FORWARD, CHAMBERING A ROUND AND MAKING THE PISTOL READY TO FIRE."

              However, it's is common. My FS and Compact 9's do it but not consistently. I have to really bang them. AFAIC, it's not a problem.
              Wait, so common doesn't = normal?

              So, when I insert a magazine on any pistol, like a man, and the slide goes forward that is not "normal"?
              Last edited by himurax13; 02-23-2015, 2:58 PM.
              Originally posted by Bumslie
              HK - the best 600 dollar gun, 900 dollars can buy.
              Originally posted by Sleighter
              Getting legal advice from a gun salesman, is like getting medical advice from a janitor at a hospital. Both make about the same per hour and both prove that being around something all day doesn't make you an expert.

              Lifetime NRA member.

              Comment

              • #8
                k1dude
                I need a LIFE!!
                • May 2009
                • 16304

                Originally posted by saudadeii
                It's not "normal" as it's not an intended feature. S&W provides a warning in the manual.

                "WARNING: DO NOT USE EXCESSIVE UPWARD FORCE WHEN INSERTING A LOADED MAGAZINE INTO THE PISTOL. EXCESSIVE UPWARD FORCE COULD CAUSE THE SLIDE TO MOVE FORWARD, CHAMBERING A ROUND AND MAKING THE PISTOL READY TO FIRE."

                However, it's is common. My FS and Compact 9's do it but not consistently. I have to really bang them. AFAIC, it's not a problem.
                It IS normal. If they all do it most of the time, then it's normal regardless of what they have to say for liability reasons.
                "Show me a young conservative and I'll show you a man without a heart. Show me an old liberal and I'll show you a man without a brain." - Sir Winston Churchill

                "I would remind you that extremism in the defense of liberty is no vice! And let me remind you also that moderation in the pursuit of justice is no virtue!" - Senator Barry Goldwater

                Comment

                • #9
                  carb1a4h
                  CGN/CGSSA Contributor
                  • Sep 2012
                  • 824

                  My M&P45 does that time to time. I searched around and it is "normal." The issue is where the slide stop catches the slide stop notch... if it is just barely engaged, then it can rack a round when a new full mag is slapped home.

                  I just use extra caution and trigger discipline when I am using the handgun. I haven't found it to be to much of a problem to warrant sending it back to S&W but YMMV.

                  Comment

                  • #10
                    billofrights
                    CGN/CGSSA Contributor
                    CGN Contributor
                    • Oct 2012
                    • 2343

                    That's never happened to me, I'll have to keep an eye out.

                    The only "problem" I've had with my M&P .45 is that my girlfriend outshoots me with it with little to no training.

                    Comment

                    • #11
                      CaffeinFeign
                      Member
                      • Feb 2012
                      • 323

                      believe it or not I like that it does this. I run an M&P 9mm in IDPA and USPSA and having that happen saves me time. Not quite sure I understand how it would "Blow your hand off" but okay... it is normal, I can even do this sometime with my XD 45 if I slam the mag hard enough...
                      1 John 4:15 "Whoever confesses that Jesus is the Son of God, God abides in him, and he in God."

                      Comment

                      • #12
                        coronaman
                        Member
                        • Feb 2013
                        • 125

                        My M&P .45 does this. I don't really worry about it. I always treat it as if there is a round in the chamber cause there usually is.

                        Dave
                        Dave

                        sigpic

                        Comment

                        • #13
                          fmunk
                          Veteran Member
                          • Apr 2011
                          • 3896

                          Originally posted by ROSSERACER
                          Has any one had issues with while the slide is "racked" after finishing a magazine, after removal of spent mag & smacking a loaded one in the slide will release, instead of having to pull slide to arm. I have done some things to the gun like apex trigger, but don't remember if it did that prior. A buddy says this is not normal & should be fixed. I don't see issue with it, because it ready to fire with out extra step. however DON"T want to blow my hand off. Any thought or info would be GREATLY appricieded
                          Common and not unique to the M&P45. This happens when the slide catch isn't fully engaged, but just enough to hold the slide back. When you aggressively slam a magazine home, the shock dislodges the slide from the catch.

                          Now if a slam fire occurs, then you have a malfunctioning gun... because these guns are specifically designed so that they can't fire unless the trigger is deliberately pulled.


                          FS: Atlas Bipod, Custom G23 RMR slide, ETS mags, Jagerwerks, Recover G26/27, CZ Scorpion bits, etc.

                          Comment

                          • #14
                            L84CABO
                            Calguns Addict
                            • Mar 2009
                            • 8798

                            It's not a "problem." It's a "feature."

                            Seriously, my M&P 45 and 9mm Core do this too. I find I can actually control it by how hard I seat the mag.

                            You'll want to be sure you train for this. That gun is hot and ready to go immediately upon a firm mag seating. Make sure your finger stays off the trigger and the gun in pointed in a safe direction during mag changes...as it should be anyway.
                            "Kestryll I wanna lick your doughnut."

                            Fighter Pilot

                            Comment

                            • #15
                              ROSSERACER
                              Junior Member
                              • Feb 2015
                              • 13

                              I feel I can control it. So if it slam fires that is an issue? Other than that I feel it's a PARTY BONUS!!!!! Thanks to all. You Guys or girls are great.

                              Comment

                              Working...
                              UA-8071174-1