Unconfigured Ad Widget

Collapse

Luger toggle release?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 7x57
    Calguns Addict
    • Nov 2008
    • 5192

    Luger toggle release?

    tl;dr: does a Luger have a toggle release as, say, a 1911 has a slide release? I've never used a Luger so I don't know if I should expect there to be one or not.

    Details: my son got an KWC airsoft Luger for Christmas. It works fine, but I don't see a slide release as a recoil-operated pistol would have. For example of what I mean, the Luger's toggle will lock back on an empty magazine as the 1911 slide will. The 1911 has a slide release you can let it slam back forward, magazine or not. I don't see a way to do the same thing on a Luger, but could very easily have missed it. It seems like there should be one so you can swap magazines and then hit the release rather than have to use two hands to pull back (up) on the toggle.

    I don't personally know anyone who does airsoft (this is the first airsoft gun I've handled), but I thought Calguns would have the answer.
    sigpic

    What do you need guns for if you are going to send your children, seven hours a day, 180 days a year to government schools? What do you need the guns for at that point?-- R. C. Sproul, Jr. (unconfirmed)

    Originally posted by bulgron
    I know every chance I get I'm going to accuse 7x57 of being a shill for LCAV. Because I can.
  • #2
    subscriber
    Senior Member
    • Nov 2011
    • 929

    Surely this works the same way as many self loaders that don't have an external slide/bolt release? You remove the mag, or replace it with a loaded one; then draw back the bolt/slide/toggle to release it.

    You should be able to lower the mag a little without completely removing it, then draw back the toggle to close the breech on an empty mag. Then fully seat the mag.

    This is pure speculation, but seems rather obvious...

    Comment

    • #3
      Supersapper
      Senior Member
      • Jan 2014
      • 1232

      Lugers do NOT have a toggle release mechanism (aka "slide release"). They have a hold open; ie after the last round the toggle will lock to the rear, but there are only two ways to lock the toggle to the rear without firing a shot:

      1. The easiest is to just load an empty magazine and pull the toggle back.
      2. Bracing the barrel at your knees, pull back the toggle with one hand, then slip a finger into the opening created by the open bolt, the lift the toggle lock mechanism.
      Just FYI...regular Lugers have a top mounted extractor that functions also as a chamber loaded indicator. Fun fact: Most Lugers, if you look at the side of the extractor, they say "geladen" -- "loaded".

      I've done both. Easiest is an empty mag.

      EDIT: I checked the link. The pistol is a pretty true replica of the real one, down to the toggle operating like a real one. They look like a lot of fun. The real ones are a lot of fun to shoot, too.

      Sapper
      Last edited by Supersapper; 12-29-2022, 7:50 PM.
      --Magazines for Sig Sauer P6
      --Walther P-38. Prefer Pre 1945
      --Luger P08

      Originally posted by ar15barrels
      Don't attempt to inject common sense into an internet pissing contest.

      Comment

      • #4
        19K
        Veteran Member
        • Aug 2013
        • 3621

        No. They have a “bolt hold open”.

        Toggle locks open. You drop the magazine. You can pull the toggle and lower on an empty chamber or insert a fresh magazine pull the toggle and release to chamber a round.


        If you want to just lock it open, the safest method is to insert an empty magazine and pull the toggle to lock it in the open position.

        Comment

        Working...
        UA-8071174-1