List: Vendors Selling Standard Capacity Magazines (Updated 2020-08-18 1600)

[ZombieLivesMatter]

Budsgunshop just made a official email sent that states they confirmed they are good to go shipping to California and taking orders.

[Air]

So I'm 0 for 5 on REAL shipments across 4 vendors. FML

I'm 2 for 4 so far...

[Anonreg_89323423]

OCFirearms.com is GTG. They even have product in-store. Please do not call them, they are very very very busy.

[paddyraid]

Midway didn't charge tax either. I think CA might have a compliance problem with the Free States.

[Smedkcuf]

Are these factory CZ or Mec-Gar ones? If they are the Mec-Gar ones, they have been dimpled during manufacturing process so you could (should) use a drill press and drill out the dimple and it will operate to full capacity. At least that's what I read on the CZ forums. I checked mine and confirmed he dimples are there and the "block" stops from the dimple area. I'd honestly hold off on drilling em out cuz you might have to lose them in a boating accident and be SOL when you need to go back to 10 rounds to legally comply with whatever laws they make up next.

They are the factory CZ ones, but I don't have access to them right now so can't inspect them. But as I can always buy more 10 rounders later it seems better to convert them now if it's possible.

[3rdiguy]

Just emailed RTG and got this automated response

Thank you for emailing RTG Parts. As a result of the recently overturned high-capacity mag ban in California we are experiencing an extremely high volume of orders.

For those emailing for tracking information, please keep in mind most automated tracking emails do not get sent until the end of the day when we close out our system.

Our entire staff is in the shop making sure orders ship out as quickly as possible. During this time, it will take us longer to reply to emails. We do care about your message and we will get back to you as soon as we can. For right now our number one priority is getting freedom-boxes out the door efficiently.

We are aware of the urgency and time sensitive nature of these orders. We are busting our butts to get every order out as fast as possible. Unfortunately excessive customer emails requesting status updates only slow this down.

Thank you for emailing.

God bless and happy shooting!

RTG Parts Staff

[KrisDSA]

Just FYI if you're nervous about GrabAGun not shipping in time, and using slow shipping when they finally ship, as of today they say they WILL charge you around a 15% restocking fee to cancel (yes, even if it has not shipped).

EDIT: I originally wrote 5%. They did not quote the percentage. But the amount they said it cost to cancel came out to about 15%.

I cancel my whole order this morning around 7 AM. I wasnt charge any restocking fee.

[RuMasco]

I'm in the same boat. Was told lead times are 4-5 days currently.
Instead of cancelling your order with them, and perhaps complicating things...why not just place another order with a supplier who is shipping same day?! Can you really have TOO many mags right now?

What ever happens I think I'm tapping out over 2k on mags in in a weekend is more than I intended to spend

[nu2gunstuff]

Just got back from Titan Sports, they have the following:
Magpul M2 30 round AR mags
C Products 30 round AR mags
C Products 32 round 9mm AR mags
Magpul Glock 19 15 round mags

I just got a ship notification from Titan, even though I tried to cancel my order because someone posted they were not gonna ship because of Becerra's request for a stay.
I'm okay with it though

[gecko82]

They just got ROASTED on facebook and changed their wording.

[Kyle1886]

PSA shipped>UPS picked up (turtle or slow boat?)>Delivery Date>8th

At least there is movement.

(Sat. order date 03/30/19)

Kyle

[JayG]

RobertRTG shipment notification received. Ordered April 1st.

[paddyraid]

Ordered from midway today at 1420 and I got shipping notice 2 min ago at 1523!

[SlickSlinky]

My Arms Unlimited order is in transit and has been since the day I received the tracking (yesterday).


I think the issue is that some people placed large orders with multiple items. I would guess that your order is sitting there waiting for a missing item.

I decided not to mix products on my orders and I think it worked because they have all shipped except for Grabagun.

Nah, I only have 2 mags of the same type ordered from Arms Unlimited and it has sat there with a tracking number but no movement. They are just overwhelmed with the amount. I would feel a lot better if it was on a truck though en route.

[SDnewbieshooter]

I read in another thread: NO. But I don't know for certain... just passing on what I read.

The CZ factory 10rd mag that came with my 75B-SA has a taller plastic base plate that, if removed and replaced with a standard factory plate, would be too short to load into the gun.

Mec-Gar 10 rounders can be unblocked more easily to my understanding.