Tweet
NIW Denny's Super Duty Complete BCG $175 shipped CONUS, $190 shipped with New Charging Handle
USPS money order-SF East Bay-Livermore $SPF$
The SUPER DUTY BOLT CARRIER GROUP is built by hand by me from the finest components for those individulsl who want a drop in Bolt Carrier Group that exhibits the highest level of reliability.
The components used are as follows:
AR-15 MILSPEC PARKED BOLT CARRIER. INTERNALLY CHROMED
INTERNALLY CHROMED GAS KEY
GRADE 8 GAS KEY SCREWS
CMT MILSPEC FIRING PIN
CMT MILSPEC CAM PIN. MOLY PLATED
CMT FIRING PIN RETAINING SPLIT PIN
CMT "CM" MARKED MPI BOLT COMPLETE
SHOT PEENED EXTRACTOR
CHROME SILICON EXTRACTOR SPRING
BRAVO CO.CORRECT DUROMETER BLACK BUMPER
BRAVO COMPANY 4 COIL EXTRA STRENGTH CHROME SILICON EXTRACTOR SPRING
The bolt carriers are shipped stripped. They are assembled by me personally. I check the keys on our granite block to make sure they are flat and true. I then de-grease the keys, screws and the mounting area on the bolt carrier.
Red Locktite is then applied to the bottom of the carrier key to insure a perfect gas seal. Red Locktite is then applied to the cap screws. The carrier key is then put in place and the screws are properly torqued tight.
The next step is to side stake the bolt carrier key. After staking the top of the key is peened to remove any burrs that may have occured in the staking process.
The ejector is removed so the factory ejector spring can be replaced with the Chrome Silicon ejector spring and the extractor reinstalled.
The final step before reassembly of the bolt is to install the Chrome Silicon extractor spring, black bumper and then replace the upgraded extractor assembly into the bolt
USPS money order-SF East Bay-Livermore $SPF$
The SUPER DUTY BOLT CARRIER GROUP is built by hand by me from the finest components for those individulsl who want a drop in Bolt Carrier Group that exhibits the highest level of reliability.
The components used are as follows:
AR-15 MILSPEC PARKED BOLT CARRIER. INTERNALLY CHROMED
INTERNALLY CHROMED GAS KEY
GRADE 8 GAS KEY SCREWS
CMT MILSPEC FIRING PIN
CMT MILSPEC CAM PIN. MOLY PLATED
CMT FIRING PIN RETAINING SPLIT PIN
CMT "CM" MARKED MPI BOLT COMPLETE
SHOT PEENED EXTRACTOR
CHROME SILICON EXTRACTOR SPRING
BRAVO CO.CORRECT DUROMETER BLACK BUMPER
BRAVO COMPANY 4 COIL EXTRA STRENGTH CHROME SILICON EXTRACTOR SPRING
The bolt carriers are shipped stripped. They are assembled by me personally. I check the keys on our granite block to make sure they are flat and true. I then de-grease the keys, screws and the mounting area on the bolt carrier.
Red Locktite is then applied to the bottom of the carrier key to insure a perfect gas seal. Red Locktite is then applied to the cap screws. The carrier key is then put in place and the screws are properly torqued tight.
The next step is to side stake the bolt carrier key. After staking the top of the key is peened to remove any burrs that may have occured in the staking process.
The ejector is removed so the factory ejector spring can be replaced with the Chrome Silicon ejector spring and the extractor reinstalled.
The final step before reassembly of the bolt is to install the Chrome Silicon extractor spring, black bumper and then replace the upgraded extractor assembly into the bolt
