Brownells 1911 lug fitting kit-Sold!

[krondoUSA]

I have 2 side charging upper receivers for sale. Bought from runnerrunnerguns out of texas. They are non reciprocating, heavy-duty, with very nice black anodizing. each comes with its own proprietary cam pin that works with any mil-spec BCG. These are the same uppers as the Gibbz arms and X-products but without the ridiculous logos on them. Asking $200+ s/h per upper or open to trades of any kind.

I am new to posting on calguns and still need to figure out how to post pics so please bear with me! Feel free to contact me via text(three3three-zero9three6) or pm for any questions regarding these uppers!

Kevin M.

[krondoUSA]

WTS- Wilson Combat .204 Ruger barrel for AR15

Hello, I have a 18" Wilson Combat .204 Ruger match grade SS fluted barrel for sale. It is used with 120rds of hornady v-max down the barrel. 1/12 twist Getting 1/2 groups at 100 yards no problem. I have no need for it anymore and could use the cash for a concealed carry pistol. These retail for $324 but since it is used I will let it go for $290. I accept payment through paypal +3% or meet FTF. I also have several boxes of Hornady 32gr v-max that i can sell with the barrel. Have a nice day

Kevin M.

[krondoUSA]

Primary arms delux extended 30mm mount

Hi, I have a slightly used primary arms deluxe extended 30mm scope mount I would like to sell. There is the usual wear on the nuts used to tighten the mount to the picatinny rail. Absolutely nothing wrong with it, just going a different route with my build. Asking $50 shipped. I will send detailed pictures to email or cell upon request. Thank you for looking!
Link to product page- http://www.primaryarms.com/primary-a.../p/kt-padlxsm/

[krondoUSA]

FS- Brand new REDX arms 20" 6.5 grendel barrel

Hello, I have a brand new 20" Red x arms 6.5 grendel barrel I would like to sell. I am going a different route with my build and need a mid length gas system instead of rifle length. The barrel comes with a custom machined thread protector to match the contour of the barrel. Asking $195 shipped. I accept paypal gift or +4%. Thank you for looking.

kevin

MADE FROM 416 STAINLESS STEEL HARDENED TO 26-32 RC AND STRESS RELIEVED. 1-8.5 RH TWIST.
CHAMBERED IN 6.5 GRENDEL TYPE 2 (TRUE 6.5 GRENDEL CHAMBERING)
.750"DIAMETER UNDER GAS BLOCK
RIFLE LENGTH GAS SYSTEM
9/16-24 THREAD FOR ATTACHING MUZZLE DEVICE.



Link to manufactuer- http://shop.redxarms.com/STRAIGHT-FL...REL-65GBBL.htm

[krondoUSA]

FS- Horus Falcon 5-20x50, illuminated H59 retical-Pics up(SPT)

Hello calguns, I have a Horus Vision Falcon 5-20x50 with the illuminated H59 retical. I purchased this scope new 2 years ago, mounted it on a 6.5 Grendel and used it for about 200 rounds over the course of a year and decided to go with something a bit smaller. Then put it in the safe until now. The scope is still pristine, only lite scuffing from scope rings. Comes with the Horus ASLI (angle scope level indicator) flip up front and rear lens covers, and a choice between a aero precision spr mount or a primary arms ultra extended mount. I will post photos this afternoon. I can meet FTF anywhere between Fresno and Bakersfield. Over $1300 invested, asking $950 obo. I accept PayPal friends and family or buyer pays +4%. I will ship but on buyers dime. PM me with any questions.
Thank you for looking!

Kevin

[krondoUSA]

Sold- used 80% arms AR15 easy jig, $110 shipped

Hello, I have a 80% arms universal AR15 easy jig I would like to sell. I've used it to complete 4 lowers, all turning out perfect. I will throw in the used end mill as well. Asking $110 shipped via PayPal gift or +4% I will send detailed pics upon request to either email or phone. Please PM me with any questions! Thank you for looking

Kevin

[krondoUSA]

Sold!-New 80% Arms .308 easy jig & 80%l lower

Buyer backed out last minute.

Hello, I have a brand spanking new 80% Arms .308 easy jig and raw .308 lower (dpms)I would like to sell. I am asking $250 shipped (firm, $35 off MSRP)to anywhere in california. As for trades I am Looking for ammo(.223,5.56,6.5 grendel,.22,12G,9mm,45acp,.204ruger),1911 parts, AR15/10 parts or maybe you have something I didn't even know I wanted! I accept PayPal gift or +4%. Please PM with any questions. First "I'll take it" gets it. Thanks for looking


-Kevin

[krondoUSA]

FDE Radlock-SOLD

I've got a FDE raddlock I would like to sell. I installed it on an 80% lower that never got used but I guess it can be considered used. Asking $25 shipped firm. Payment via PayPal gift or add 3%. I can send photos to email or cell upon request. For fastest response please pm me. Thanks!

-Kevin

[krondoUSA]

Tapco AR Armorers wrench

Hello, I have a used tapco AR armores wrench I would like to sell.

(https://www.cheaperthandirt.com/prod...51348007366.do)

Asking $30 shipped to anywhere on california. I accept payment through PayPal gift. I will send photos to cell or email upon request. Please pm with any questions. Thanks!

-Kevin

[krondoUSA]

Delete-Noveske GenIII FDE chainsaw Stripped upper

Hello, I have a Noveske Gen III stripped upper w/ factory cerakote in FDE. The cerakote finish is absolutely flawless. The reason for being chainsaw is the white noveske logo on the top rear portion of the picatinny is a little dis colored and the chainsaw marking on the underneath of the forword assist is botched. It is still brand new, never built on. I'm looking to sell for $265 via PayPal gift or trade for a standard black Gen III stripped upper. I will send photos upon request to email or cell. Please PM me with any questions as I do not check my threads often after they have been posted. Thank you!

-Kevin

[krondoUSA]

WTT- BCM fde stock & short vertical grip for black

Hello, I have a BCM gunfighter stock and short vertical grip in FDE I would like to trade for the black versions. They are new, installed on rifle and realized FDE is not my cup o' tea. PM me if you are interested. Thanks!

-Kevin

[krondoUSA]

Updated-1-20-17,JP gasblock,service rifle float tube

Last 2 items! All prices include shipping to anywhere in California, out of state will be a bit more. I accept either paypal gift or add 4%. Prices are FIRM, anymore loweballers will be ignored. Please PM me with any questions or if you would like more detailed photos. The first ill take it followed by a pm gets it.

-Kevin


JP .750 stainless steel railed adjustable gas block. New in box. This has been discontinued by JP. Asking $85 shipped


Custom mid length service rifle float tube made by compass lake with a round handguard cap instead of the standard triangular one.The triangular float tube is Sold. Asking $135 shipped

[krondoUSA]

ronin sold!

Sold

[krondoUSA]

Brownells 1911 lug fitting kit-Sold!

Sold to fndaway66

Hey everyone, I have a brand new never opened Brownells 1911 lug fitting kit. Comes with a slide pusher, barrel holder, lug cutter handle, .195 and .186" cutters. All this comes in a foam lined hard plastic case with detailed instructions on how to cut your barrel lug with said tools. This kit goes for $179 +shipping. Looking to get $140 shipped. Link below is the Brownells product page. I can post photos upon request but what you see on the website is exactly what you will be getting from me. Please contact me via PM with any questions. Thank you!

-Kevin

http://www.brownells.com/gunsmith-tools-supplies/handgun-tools/barrel-tools/barrel-fitting-tools/1911-lug-fitting-kit-prod18787.aspx