Tweet
SOLD TO H2O sport!!!! Thank you Randy.
Also looking for the following to trade:
Springfield armory EMP
Kimber 1911 stainless with 4 inch barrel or less
Im open to your suggestions, however I am not looking for any more polymer guns. Send me details of what you have and let me take a look.
I will get a more specific shot of the press posted later.
I am located in north orange county in the city of cypress.
OK.heres an update. I had originally intended to sell to another individual but looks like he has other priorities right now. Here are the details for the equipment:
It will only come with the small primer setup. There is a "thunk" sound that is generated when sizing a shell and only happens on the upstroke , all others stations works fine. The press will come with what is pictured + drop tube, powder measure. And last, the item only has one caliber conversion kit which has a chip on one slot of the plate. The shell plate is a #5 (which is for 9mm/ but also works with 40). No dies will be included , except that one that is directly above the swaging slot. You will have to provide your own sizer/seat/crimp.
As far as priorities, H2O sport was 1st in order of stating an interest. Followed by mioduz, thirdly by funranger and then MSA. This order will be the one I will abide by in fairness to everyone, however as i have stated the reloading press is a "used press" and as such I would like to give everyone the opportunity to inspect it prior to purchase. I have been using it for my 40 S&W but have become frustrated with the "clunk" sound that comes on the upstroke. The shell plate will need replacement but that is definitely an easy fix. There are no other conversion kits included with the press and the toolhead that is attached to it will be the only one in the package. Send me a pm if you decide to stay on the short list and i will get back to you as soon as possible.
Also looking for the following to trade:
Springfield armory EMP
Kimber 1911 stainless with 4 inch barrel or less
Im open to your suggestions, however I am not looking for any more polymer guns. Send me details of what you have and let me take a look.
I will get a more specific shot of the press posted later.
I am located in north orange county in the city of cypress.
OK.heres an update. I had originally intended to sell to another individual but looks like he has other priorities right now. Here are the details for the equipment:
It will only come with the small primer setup. There is a "thunk" sound that is generated when sizing a shell and only happens on the upstroke , all others stations works fine. The press will come with what is pictured + drop tube, powder measure. And last, the item only has one caliber conversion kit which has a chip on one slot of the plate. The shell plate is a #5 (which is for 9mm/ but also works with 40). No dies will be included , except that one that is directly above the swaging slot. You will have to provide your own sizer/seat/crimp.
As far as priorities, H2O sport was 1st in order of stating an interest. Followed by mioduz, thirdly by funranger and then MSA. This order will be the one I will abide by in fairness to everyone, however as i have stated the reloading press is a "used press" and as such I would like to give everyone the opportunity to inspect it prior to purchase. I have been using it for my 40 S&W but have become frustrated with the "clunk" sound that comes on the upstroke. The shell plate will need replacement but that is definitely an easy fix. There are no other conversion kits included with the press and the toolhead that is attached to it will be the only one in the package. Send me a pm if you decide to stay on the short list and i will get back to you as soon as possible.
