Need some AR15 parts dimensions and weights can anyone help me out?

[AJAX22]

I need the length of a flat top upper (not including barrel or barrel nut, as measured parallel to the bore)

I need the length from the heel of the pistol grip to the front of the upper receiver as measured parallel to the bore on an assembled gun. (in mm)

I need the height from the heel of the pistol grip to the top of the upper receiver measured perpendicular to the bore. (in mm)

I need the width of the upper and lower receiver at the widest point (in mm)


I need the weight of a LPK (in grams)

I need the weight of an aluminum stripped lower (in grams)

I need the weight of a carbon fiber stripped lower (in grams)

I need the weight of a cienner .22LR conversion kit (in grams)

I need the weight of a stripped aluminum upper receiver (in grams)

I need the weight of a stripped carbon fiber upper receiver (in grams)

I need the weight of a barrel nut (in grams)



Any help would be much appriciated...

I have an idea......

[ParallaxTactical.com]

http://www.cncguns.com/downloads.html

SolidWorks files

[armygunsmith]

I think I see where you're going, but do tell.

[AJAX22]

I don't have solidworks on my laptop, can it be opened in anything else?

I'd rather keep this one close the the chest until I know if it is technically feasible.... no point in getting everyone's hopes up if it doesn't pan out.

[AJAX22]

bump... still need these dimensions if anyone can help out.

it could be very very cool...

[Nodda Duma]

You should be able to find a solidworks viewer online

-Jason

[THT]

I need the length of a flat top upper (not including barrel or barrel nut, as measured parallel to the bore)

I need the length from the heel of the pistol grip to the front of the upper receiver as measured parallel to the bore on an assembled gun. (in mm)

I need the height from the heel of the pistol grip to the top of the upper receiver measured perpendicular to the bore. (in mm)

I need the width of the upper and lower receiver at the widest point (in mm)


I need the weight of a LPK (in grams)

I need the weight of an aluminum stripped lower (in grams)

I need the weight of a carbon fiber stripped lower (in grams)

I need the weight of a cienner .22LR conversion kit (in grams)

I need the weight of a stripped aluminum upper receiver (in grams)

I need the weight of a stripped carbon fiber upper receiver (in grams)

I need the weight of a barrel nut (in grams)



Any help would be much appriciated...

I have an idea......

DPMS AR15: 210g

[k1dude]

If you're trying to build a small and light bug-out weapon/backpack weapon, consider the Kel-Tec SU-16B semi-auto (.223). It folds in half and only weighs 4.7 pounds. You'll be hard pressed to beat that with your own build. Plus the Kel-Tec only costs around $500. Any AR you build from scratch will far exceed that.

[AJAX22]

I'm not trying to build this for any utilitarian purpouse, cost is not a factor.

I'm trying to work a new loophole for detachable mag semi auto ar15 pistols

[ke6guj]

[AJAX22]

keep it on the down low, and please don't make a big deal out of it.

It will only work if a few key things can fly under the radar for a while.

[xrMike]

I'm trying to work a new loophole for detachable mag semi auto ar15 pistols

That doesn't sound like a loophole to me, but more like an exciting, new (yet still-strict!) interpretation of the letter of the law, as it is currently written.

That's not the same as a dirty common loophole.