Kidd trigger group?

[xbimmers]

Thank you all for your input. I went ahead and ordered the Kidd Trigger group. I should get it by thursday of next week.

[LasVegasTaxMan]

Going back to the trigger groups for the 10-22. I just purchased a hornet products trigger group with about a 2.5 lb trigger pull.

Upon opening the package I have to say it was very impressive, wrapped well, included instructions on how to install. I did not want to spend a whole lot of money on my first plinker set up. I paid less than $100 dollars and so far it seems to be worth the price. I will give details once I get a change to shoot it.

If any of you have a hornet trigger group let us know your thoughts.

[mds2004]

I know how much they are on Nodaks website, but the problem is my FFL wants just as much as the receiver to get it here. Sad...I know.

Use a different FFL. Mine only charges 25 + DROS. Others in my town will charge $125 + DROS. Just shop around.

[bombadillo]

Wow!!! My local guy only wants 25 bucks to take a transfer. Thats insane that he would want over 50 bucks or so.

[Jaybo510]

Shoot, they're on sale right now for 110 from nodak directly. Check them out: http://www.nodakspud.com/NDS-22.htm You can get the tech sight front sight for 35 bucks too.

I know how much they are on Nodaks website, but the problem is my FFL wants just as much as the receiver to get it here. Sad...I know.

[bombadillo]

Shoot, they're on sale right now for 110 from nodak directly. Check them out: http://www.nodakspud.com/NDS-22.htm You can get the tech sight front sight for 35 bucks too.

[mds2004]

I agree. I definitely like the integral rail more.

[CHS]

Here are his new ones so far. They are not yet finished:

Looks good! I would prefer an integral rail (since that's what I originally bought, heh), but if it comes drilled/tap for different scope rails that he'll be offering, that sounds good too.

Probably much more cost effective for him to offer one receiver with three sighting options rather than three different receivers.

I love my OD green hard anodizing though

[mds2004]

Here are his new ones so far. They are not yet finished:

[span style='font-weight: bold;']Originally Posted By mike_nds:[/span]
Well we have begun production on the new NDS-22 receivers.

The basics are as follows;

The top of the receiver will be SMOOTH, no integral rail.

We have blended the back end to match the stock in a similar fashion to the factory one. It will be close, but not exactly the same.

The top of the receiver will have a flat for proper scope base mounting, no "hump".

It will be drilled and tapped for several different rails/sights.

One will be a 0 MOA

One will be 20 MOA (or close as we can come) for long range shooters

And there will be a rear peep sight available for "Appleseed" type shooters.



Here's some pics of one of the receivers, it's still in process and has lots of machining left to be done.

However, it gives you a good idea of the contour of the top and rear of the new design.

The flat on the top is about 1/2" wide, and will give a good surface for the scope bases.

The rear radius mates very well with the line of the factory stock.

[mds2004]

Did you have to wait 10 days for it? Because if you didnt I will drive pretty much anywhere in California to get one for that price. Where did you get it again?

He bought two from Nodak at $135 a piece, and they shipped it to his FFL. From there he paid dealer fees + $25 DROS and had to wait 10 days.

This is the same process you will have to go through. Ask around for dealers with best prices. Mine does it for $50 including DROS. If purchased at $140, that would be $190 OTD. When you buy it, immediately tell your dealer so you can start the DROS before he even receives the receiver so you do not lose any days.

Edit: all he has are his other receivers at $110 shipped.

[CHS]

Did you have to wait 10 days for it? Because if you didnt I will drive pretty much anywhere in California to get one for that price. Where did you get it again?

It's a firearm, you have to wait 10 days.

http://nodakspud.com/NDS-22.htm

Bought it from there, but it looks like they don't make it anymore and are re-vamping their design.

[Jaybo510]

I paid $135 for mine. They were $140 if you bought one, or $135 if you bought two. I got one for me and one for the GF.

Did you have to wait 10 days for it? Because if you didnt I will drive pretty much anywhere in California to get one for that price. Where did you get it again?

[Jaybo510]

Just for a visual...here's a picture of my Ruger 10-22 that will receive a Kidd trigger group in the near future.

Is that one of those Butler Creek steel lip 10 rounders?

[CHS]

What did you pay for it? Irvington Arms was trying to sell me one for $200 for a unfinished NDS-22R. I contacted Nodak and they told me it list for $140. So Im wondering what you got yours for. LMK

I paid $135 for mine. They were $140 if you bought one, or $135 if you bought two. I got one for me and one for the GF.

[Jaybo510]

http://www.nodakspud.com/NDS-22.htm

I've got an OD green one from before they had to re-anodize a batch and moly-coated them. Mine's the NDS-22R, railed model. It's not shown on that page. Looks like he's totally redoing his design.

What did you pay for it? Irvington Arms was trying to sell me one for $200 for a unfinished NDS-22R. I contacted Nodak and they told me it list for $140. So Im wondering what you got yours for. LMK