CZ rear sights

[jmardy]

That Springer won't work on a TS but it works OK on my SP-01.
I've been searching for an LPA cut Docter mount for my Springfield 1911 and the only option was an EGW mount for a JP that you then adapt to Docter/FastFire (no thanks).
I found This: http://slaughterguns.com/sight_mounts.html
and emailed the guy and he said his LPA Bomar mount will work.
Ordered one today.
Will let you guys know how it works.

[Litespeeds]

That Springer won't work on a TS but it works OK on my SP-01.
I've been searching for an LPA cut Docter mount for my Springfield 1911 and the only option was an EGW mount for a JP that you then adapt to Docter/FastFire (no thanks).
I found This: http://slaughterguns.com/sight_mounts.html
and emailed the guy and he said his LPA Bomar mount will work.
Ordered one today.
Will let you guys know how it works.

Thanks. Looking forward to hearing your results. I'll keep my fingers crossed. I'm picking up a SP-01 SAO soon and will be putting my Burris FF3 and the CGW 10X bushing. Can't wait to mod a new toy. At least new to me.

[CAGLS]

Kensight adjustable LPA rear sight is standard on the SP-01 Shadow Target. It also fits on the TS slide which both come with the LPA dovetail cut.

[penguinofsleep]

thanks for the input everyone.

now i'll say what i'm looking for in more detail, i didn't want anyone limiting responses earlier so i left it intentionally vague:

for an SP01:
rear:
- slightly deeper notch, maybe by about 0.5mm
- taller rear sight, just to make it easier to rack with the rear sight
- yellow tritium rear sight in a 8 figure config with the front (think heinie sights)
- different shape rear sight that draws your eyes automatically to the right point in the notch. since there is no easy way to describe this, i'll list a few sights i like:
m&p pro core rear sights (taller than standard m&p sights). they seem to always automatically draw my eyes to the right spot so everything lines up properly right away.
shape of walther ppq rear sights. whole thing slopes inwards and the rear corners are filed down to again draw your eyes to the notch quickly. they aren't tall enough for me though.

so far the czc h-tac sights are the closest to what i want but the notch doesn't look deep enough, they don't come in the figure 8 sight configuration, and the rear profile of the sight could be done slightly differently.

front sight:
- actually almost fine as is, but could be 0.5 or 1mm taller if rear notch is made deeper
- sight tapers slightly towards the top instead of running vertically. not drastic. just like the m&p pro core front sight - always draws my eyes to the right place immediately.


for a standard cz75 rear:
- currently have a CZC competition rear (no tritium or fiber optics), just wish the rear notch was about 0.5mm deeper.
- maybe reshape the rear profile of the sight slightly, again to immediately draw your eyes towards the middle.

[Tok36]

Hay penguin CZC can alter any of there sights if you like. I have see a few guys have the notch widened and deepened from the stock config.

You say you like the M&P sight, is there an option to have your rear sight cut reprofiled for that sight or something els you like more?

[Varg Vikernes]

Would there be enough material to do Novak cuts??

[Tok36]

On the non FPB pistols there is, i am unclear on the FPB pistols.



This is what i plan on doing with my 85 combat slide.