Glock 19x 80 Percent Frame?

[Rhyyke]

Tried searching but didn't find anything, has no one made an 80 percent Glock 19x frame? As in, a Glock 17 length frame that fits a 19 slide?

[Mr.Caketown]

I thought the 80% frames out there right now were mainly for Gen 3 and G43 , i think the G19x is a 5 or something

[LeadFarmer74]

Originally Posted by Rhyyke

Tried searching but didn't find anything, has no one made an 80 percent Glock 19x frame? As in, a Glock 17 length frame that fits a 19 slide?

Not that I am aware of. Only 17s and 19s.

[BarrettM99]

Lone wolf showed a Glock 17 size frame that accepts Glock 19 sides at shot show 17. Might be worthwhile to give them a call to check if it is available yet.

B791C4B1-AEE7-4C3D-901A-8294A35661E7.jpg

[boopiejones]

Originally Posted by Mr.Caketown

I thought the 80% frames out there right now were mainly for Gen 3 and G43 , i think the G19x is a 5 or something

Through gen 4, the Glock 17 and 19 barrels had a different lug pattern. So you couldn’t put a 17 barrel on a 19 or vice versa. With the gen 5, glock changed the 17’s barrel lug so that it is the same as the 19 lug pattern. This allows the slides and barrels to be interchangeable - hence the 19x is now possible.

I believe you are correct that all the 17 and 18 80% frames are gen 3. Lone wolf makes a conversion barrel so that you can put a 17 slide on a 19 frame, but it isn’t possible to put a 19 slide on a gen 3 17 frame. The primary issue is that the longer lug on the gen 3 17 combined with the shorter slide of the 19 won’t allow the gun to cycle fully, resulting in failure to eject and failure to feed.

[boopiejones]

Originally Posted by BarrettM99

Lone wolf showed a Glock 17 size frame that accepts Glock 19 sides at shot show 17. Might be worthwhile to give them a call to check if it is available yet.

Attachment 740769

But I believe those are 100% frames and not on the roster.

[olddirtygerm]

Originally Posted by Rhyyke

Tried searching but didn't find anything, has no one made an 80 percent Glock 19x frame? As in, a Glock 17 length frame that fits a 19 slide?

Polymer 80 has a 19x coming out or out. They announced it and probably have info for it listed in their site.


Sent from my iPhone using Tapatalk Pro

[boopiejones]

Originally Posted by olddirtygerm

Polymer 80 has a 19x coming out or out. They announced it and probably have info for it listed in their site.


Sent from my iPhone using Tapatalk Pro

Do you have a link?

I see news saying they’re going to make a polymer 80 “CL” but that is a 17 slide with a 19 frame (which you can already do using a conversion barrel). Exact opposite of a 19x.

[RollingCode3]

Is it possible to make it CA legal since it is illegal to manufacture an off-roster pistol in CA.

[LeadFarmer74]

Originally Posted by RollingCode3

Is it possible to make it CA legal since it is illegal to manufacture an off-roster pistol in CA.

Single shot or move.

[Lonestargrizzly]

Originally Posted by RollingCode3

Is it possible to make it CA legal since it is illegal to manufacture an off-roster pistol in CA.

Cant you just redros it with a 17 slide and then replace the 17 slide with a 19 slide?
Say that the grip bumps were removed by you?