RTG Parts Collectibles: USGI MOSQUITO HEAD NET, LIKE NEW, FITS MOST HATS $6.99

[RTGparts]

People have been asking about our HK wall mount that incorporates 8 of these into one unit. Those are sold out, unfortunately, but these can be configured any way you like for any number of rifles you want to mount. We have had several customers make their own back plate to mount multiple mounts side by side in a single unit. Get yours before we run out of these too.

HK made German army issue vehicle and wall mount. Designed for both HK G3 and HKG36 but works with a large number or weapons systems. These are really cool and have the largest molded HK logos we have seen. Work with all G36 variants as well as the HK G3/91, HK93/33/53, HK MP5. Has adjustable handguard inserts that allow you to securely mount HK wide or slim handguards. Will fit many other weapons systems with a little or no modification.

The buttstock slides into the bottom mount and the handguard locks into the upper throw lever mount. This is a quick release design so you can remove your weapon without delay. Buttstock base has a large and small pocket. Small pocket works with all HK A2 stocks. Larger opening works with G36 and UMP style buttstocks.

Each single vehicle mount kit includes buttstock mount, handguard mount with extension and mounting hardware. Mounting screws are meant to be threaded directly into steel plate. If mounting on wood or drywall you can substitute for other bolts or screws.

HK MULTI WEAPON WALL & VEHICLE MOUNT NEW, $49.95
https://www.robertrtg.com/store/pc/H...EW-124p192.htm


Thanks for looking and happy shooting!
Darwin Nercesian
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: darwin@rtgparts.com

[RTGparts]

This is a family pack of 3 Finnish Gas Masks and a case 45 filters. Because the 3 masks come with filters as well, you have a total of 48 filters. These are new old stock in unissued condition.

Great quality mask and filter made in the 1990's. Clean, modern construction from a country you can trust.

Filter is 60mm threading. You can find adapters that allow for the use of more common, and more affordable 40mm filters, but this pack makes sure you have all that you need.

You get 3 of these: FINNISH GAS MASK WITH FILTER, NOS UNISSUED

You get 45 of these: FINNISH 60MM GAS FILTER, NOS UNISSUED

ONLY 1 SET AVAILABLE: FINNISH 60MM GAS MASK FAMILY PACK, NOS UNISSUED, $315.00
https://www.robertrtg.com/store/pc/F...UED-8p8812.htm

[RTGparts]

We have a small number of beautiful Czech VZ61 Skorpion parts kits. The Skorpion is one of the coolest SMG's to every come out of the Soviet Union.

Each kit comes as pictured and includes one magazine. Barrels were torch cut length wise so they are great to use for a dummy gun. Lower receiver was demilled to BATF requirements. Kits have very consistent cuts.

Conditions are surplus very-good or better. We photographed three separate kits so you can get an idea about the range of conditions. As always with parts kits, it's possible a small part(s) went missing during demill overseas or during transit.

Only a few available. Don't miss out.

VZ61 SKORPION PARTS KIT, $279.95
https://www.robertrtg.com/store/pc/V...IT-15p8813.htm

[RTGparts]

Unissued FR-8 wood stock and handguard. New old stock surplus from the Spanish military.

Repair or replace that beat up stock on your collectable FR-8. Wood will require finish sanding and correct fitting to metal parts.

SPANISH FR-8 STOCK & HANDGUARD, NOS, $199.95
https://www.robertrtg.com/store/pc/S...OS-15p8647.htm

[RTGparts]

Rheinmetall MG3 tank mount for your MG42, MG1, MG3, MG74 or M53. These are complete in box and ready for install on your favorite vehicle.

Trigger bar is connected to the hand lever for easy firing. There is also the option of remote firing with the help of an electronic solenoid that operates the trigger bar and rear hand lever. A cable runs from the vehicle to the mount. We do not have the cables but this can be figured out by a motivated client. Weapon can be fired by hand using the lever or remotely using the solenoid.

Wouldn't this look excellent rotating out of the fender of your F-350 or Power Wagon?

MG3 MG42 TANK MOUNT NEW, $399.95
https://www.robertrtg.com/store/pc/M...EW-17p3397.htm

[RTGparts]

Mosin Nagant clip. New condition Polish production, the best quality clips available for your Nagant. Will work with all Mosin-Nagant rifles including Russian, Romainian, Polish Etc.

MOSIN-NAGANT CLIP, $2.39
https://www.robertrtg.com/store/pc/M...IP-14p2667.htm


PRVI PARTIZAN 7.62X54R 182GR FMJ, 20RD BOX
https://www.robertrtg.com/store/pc/P...BOX-8p8807.htm

[RTGparts]

Armorer level 38mm to 44mm cleaning kit. These are labeled as 44mm Panzerfaust cleaning kits but the Germans use these for multiple weapon platforms from 38mm to 44mm, as such the labels may vary. This is a great kit with long cleaning rod and many cleaning tools and accessories.

We have sold the smaller 40mm field cleaning kits for years but now for the first time we have a more advanced kit available.

Comes in a handy case with carry strap. Looks like a G.I. issue pool cue case.

These German army surplus kits are in great shape, most appear unissued.

38-44MM CLEANING KIT - THE BIG KIT, $39.95
https://www.robertrtg.com/store/pc/3...T-190p3770.htm

[RTGparts]

French Berthier 3rd 8mm Lebel clip. Original French military production in unissued condition. You won't find them nicer than this!

If you own a Berthier 8mm Lebel then you know how difficult these are to find. Stock up while you can.

FRENCH BERTHIER 3RD CLIP, 8MM LEBEL, $10.99
https://www.robertrtg.com/store/pc/F...EL-15p3869.htm

[RTGparts]

Swiss military issue stove w/ fuel. Sealed air-tight, ready for long term storage or immediate use. Includes stand.

Genuine Swiss military issue
Perfect for camping, hiking, hunting, survivalist, preppers, and bug-out-bags
Lightweight at only 5.3 ounces
1 hour burn time
Condition: New, never issued

SWISS M71 STOVE WITH FUEL NEW, $4.99
https://www.robertrtg.com/store/pc/S...NEW-8p8855.htm

[RTGparts]

Cold Steel, Competition Thrower, 1055 Carbon Steel, Plain Edge, Hatchet, 4" Cutting Edge

Fantastic throwing axe for the competitive thrower or first time learner. This modified Axe Gang Hatchet meets regulations for competition axe throwing in your favorite league.

1055 Carbon Steel
16" American Hickory Handle
Meets most axe throwing association requirements for tournament play

COLD STEEL COMPETITION THROWER, $26.95
https://www.robertrtg.com/store/pc/C...WER-8p8852.htm

[RTGparts]

Czech M10M Gas Mask Kit. Great quality, asbestos free gas mask kit.

The M10M is a modernized, improved version of the Soviet M10 which was a copy of the U.S. M17 gas mask.

The Czech M10M gas mask comes with filter and drinking tube. This is a lightweight and comfortable mask. Specially designed for extended use with superior comfort, secure fit, and low breathing resistance. The M10M mask's main purpose is to protect from nuclear, biological, and chemical agents.

It does not use the same 40mm filter as most earlier masks. Instead it uses a pair of asbestos free filters on the left and right side of the mask and has a speaking port on the front of the mask.

The bigger eye sockets allow for the mask to provide clear visibility, ideal for being worn during long periods of time. It also contains a drinking tube allowing for fluids to be consumed while using the mask.

The adjustable rubber straps are specially designed for comfort and extended use. This protective gas mask causes minimal interference with physical activities.

CZECH M10M GAS MASK KIT, $26.95
https://www.robertrtg.com/store/pc/C...KIT-8p8866.htm

[RTGparts]

Brand new French made Gas Mask Filter. Standard 40mm, will fit NATO and Soviet gas masks.

2005 production, the safest filter you can buy at surplus prices!

Made in France. This same make of filter is used by the French, Belgian, Italian forces and many more European and NATO nations.

Will fit Russian, Polish, German, French, Italian, English and Israeli gas masks, just to name a few. The vast majority of military gas masks use these standardized 40mm filters.

NEW FRENCH GAS MASK FILTER, STANDARD 40MM, FITS SOVIET OR NATO, $9.95
https://www.robertrtg.com/store/pc/N...ATO-8p7533.htm

[RTGparts]

By purchasing this item you will receive the EXACT items shown in the pictures.

Here is a blast from the past! This German Armorers Tool Kit has a lot of history and is about 2/3 complete. One of the latches on the wood crate is busted but the case still locks up tight. Please look through all of the photos for a complete inventory of items.

Some of the tools included:

HKG3/33 Cocking Tube Straightening Mandrel (for removing dents)
MG3 Barrel Grease Pump (for if a bullet is stuck in the barrel)
HKG3/33 15x1 Barrel Grease Pump (for if a bullet is stuck in the barrel)
HK Sight Adjustment Tool
7.62x51 Head Space Gauge (no-go or field gauge)
Feeler Gauge
MG3 Multi Tool (ruptured case tool with extractor removal tool)
MG3 Carbon Scraper
MG3 Top Cover hinge Tool
Walther P1/38 sight tool
25mm Head Space Gauge
HK 40mm Grenade Launcher Firing Pin Protrusion gauge.
HK 40mm Grenade Launcher Mandrel for knocking dents out of tubes
HK 40mm Grenade Head Spacing Gauge
Cleaning Rods
7.62 Chamber Brushes
7.62 Bore Brushes
7.62 dummy rounds

I have forgotten what the other tools are for.

GERMAN ARMORERS TOOL KIT, $895.00
https://www.robertrtg.com/store/pc/G...KIT-7p8873.htm

[RTGparts]

By purchasing this item you will receive the EXACT item shown in the pictures.

Polish army surplus M91 Mosin Nagant armorers gauge set. This is an armorers gauge set for the 7.62x54R Mosin Nagant.

Box is slightly warped and does not close all the way. One of the latches is also damaged. Please see pictures.

MOSIN NAGANT M91 ARMORERS GAUGE SET, ONLY 1 AVAILABLE, $249.95
https://www.robertrtg.com/store/pc/M...T-319p8875.htm

[RTGparts]

Super rare SAR80 parts kit. These were beautiful guns before demill. Receiver and barrel have been cut up but the pieces are included. Kits come as pictured.

This AR15/AR18 hybrid was the best of both worlds and was one of the best 556 weapons ever made.

SAR80 PARTS KIT, $899.00
https://www.robertrtg.com/store/pc/S...IT-15p8331.htm

[RTGparts]

Sold as-is. By purchasing this item you will receive the EXACT items shown in the pictures.

Partial Breda37 Parts Kit. Best I can tell the only parts missing are the recoil assembly and feed tray assembly. Comes with everything that is shown in the image including a live and uncut barrel, receiver sections, top cover assembly, spade grip, cocking handle, bolt assembly.

Italian surplus Breda 37 parts kit with live barrel. Not an easy kit to find with a working barrel! These are nice demills that can be easily made into a dummy gun or a post sample machine gun if you find the missing parts.

PARTIAL ITALIAN BREDA 37 PARTS KIT WITH LIVE BARREL, $599.99
https://www.robertrtg.com/store/pc/P...EL-15p8879.htm


PARTIAL ITALIAN BREDA 37 PARTS KIT WITH LIVE BARREL, $599.99
https://www.robertrtg.com/store/pc/P...EL-15p8878.htm

[RTGparts]

ONLY 1 AVAILABLE: Sold as is. By purchasing this item you will receive the EXACT item shown in the pictures.

I put this kit together using a surplus Beryl 4-cell mag pouch and added 4 new AC-Unity 5.45x39 window magazines, a Russian oiler and a brand new Tantal Beryl Tripod.

Pouch is missing 1 button for the main latch.

ONLY 1 AVAILABLE, BERYL SURPLUS 4-CELL MAG POUCH W/ 4X 5.45x39 MAGS, OILER & BIPOD, $79.99
https://www.robertrtg.com/store/pc/B...POD-5p8872.htm

[RTGparts]

Combo deal! Russian AK47 3-cell magazine pouch with three AC-Unity Soviet Follower AK47 30rd Magazines. Magazines are brand new. Pouches range from very-good to like new condition and are original soviet era, Russian production.

RUSSIAN AK47 3-CELL MAG POUCH W/ THREE 30RD AK47 MAGAZINES, $32.95
https://www.robertrtg.com/store/pc/R...NES-4p8890.htm

[RTGparts]

Soviet USSR civil guard gas mask kit new. Civil Guard kits are the same as Russian military GP5 gas masks but have a grey mask instead of military black. This type of gas mask was stored by the Soviets for the event of nuclear, biological or chemical attacks and were to be distributed to the population if needed. Luckily the need rarely arose.

These are in new and unissued condition. Great working order with soft rubber, brand new filter and carry case. The metal buttons on the carry pouch might have some surface rust. Other than light corrosion on metal parts these are in perfect working order and remain ready to use.

These were made throughout the 1970's and 80's until the end of the cold war.

Each kit includes the bag, mask and filter. Some kits include accessories or military literature. These were made over a number of years so expect slight variation in the color/design of the bags and masks.

Takes a standard 40mm filter.

RUSSIAN GP5 GAS MASK KIT NEW, SOVIET USSR CIVIL GUARD, $19.95
https://www.robertrtg.com/store/pc/R...ARD-8p7232.htm

[RTGparts]

Okay, this is just cool...

FRENCH MILITARY ISSUE WIRE SAW $9.95
https://www.robertrtg.com/store/pc/F...SAW-8p7230.htm


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: info@rtgparts.com

[RTGparts]

Italian military surplus belt with pouch and holster kit in an attractive foliage green.

Pistol shown in the images is a Glock 48. We were able to test the holster with Glock 19, 23, 45 and 48. I suspect a Glock 17/22 will also fit but we don't have an example for testing. 1911 Government barely fit if you pulled the cover tightly to secure.

Condition is unissued old stock. Some have some dust, dirt or marks from storage but are otherwise new. Very nice quality set for the money.

ITALIAN BELT W/ POUCH AND HOLSTER SET, FOLIAGE GREEN, $19.99
https://www.robertrtg.com/store/pc/I...EEN-8p8902.htm

[RTGparts]

USGI AT-Digital small triple magazine pouch. Dual belt loop / MOLLE straps on back, Dual front buckles, Inner daisy chain secures 3 pistol magazines, Measures 7x5x2 Inch

This works with Beretta M9 mags, Glock mags, Sig Mags, etc.

Condition is surplus Like New.

USGI AT-DIGITAL ARTILLERY POUCH OR SMALL TRIPLE MAGAZINE POUCH, $12.95
https://www.robertrtg.com/store/pc/U...UCH-8p8944.htm

[RTGparts]

Dutch small magazine pouch with dual alice clips. Not sure what type of mag this held but it measures: 4.3 x 3.9 x 1.5 Inch. Holds a 20rd AR magazine but looks like it originally held a 10rd or 15rd .308 magazine.

Light weight with dual clips on the back for mounting to most belts or web gear.

Conditions range from surplus good to excellent.

NSN Number 8465-17-106-3932

DUTCH SMALL MAGAZINE POUCH, $4.95
https://www.robertrtg.com/store/pc/D...UCH-8p8943.htm


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: darwin@rtgparts.com

[RTGparts]

Sold as is. By purchasing this item you will receive the EXACT item shown in the pictures.

Size Large. Polish military issue, Desert Camo Flak Vest with two strike plates. Includes groin pad which is folded up in image 1.

This is different than the style we had before which had pockets and mag pouches. This is a less bulky but equally effective version.

Adjustable for a good fit. Weighs between 28 pounds, depending on size.

A great body armor kit you can be proud of for years!

POLISH ARMORED VEST WITH TWO STRIKE PLATES, LARGE, $329.95
https://www.robertrtg.com/store/pc/P...RGE-8p8957.htm


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: darwin@rtgparts.com

[RTGparts]

We have some really nice Romanian tactical vests in excellent to like new condition. These all appear to be unissued but expect normal surplus storage or handling marks.

Light weight rig that is sturdy and strong. Front 4 mag pouches barely fit standard Soviet AK47 30rd mags. Also fit most 30rd AK74, AR15, Mini-14, Scar 16, FN FNC and Steyr Aug magazines. The pouches are to small for AK47 Bakelite, Polymer or AC-Unity 30rd mags. Only steel 30rd AK47 mags fit.

This will make an awesome addition to your Romanian AK collection.

ROMANIAN CAMO TACTICAL VEST LIKE NEW, $74.95
https://www.robertrtg.com/store/pc/R...NEW-8p8974.htm

[RTGparts]

RUSSIAN GP5 GAS MASK KIT NEW, SOVIET USSR CIVIL GUARD, $19.95
https://www.robertrtg.com/store/pc/R...ARD-8p7232.htm


RUSSIAN GP5 GAS MASK KIT NEW, SOVIET USSR MILITARY BLACK, $23.95
https://www.robertrtg.com/store/pc/R...ACK-8p7233.htm

[RTGparts]

Do you have liberals in your town? Do you live in constant fear that Alec Baldwin may be lurking in your neighborhood? RTG to the rescue. Protect yourself and your loved ones by Baldwin-proofing yourselves today! Lets face it, Alec Baldwin is now responsible for more firearms related deaths and injuries than most gun owners in this country, and that is something we need to recognize. Here at RTG, we denounce work place violence and the people who perpetrate it.



CZECH ARMOR STRIKE PLATE, NEW, $129.95
https://www.robertrtg.com/store/pc/C...W-404p8177.htm


POLISH DESERT CAMO FLAK VEST WITH TWO STRIKE PLATES, LARGE, $329.95
https://www.robertrtg.com/store/pc/P...E-404p7631.htm


AUSTRIAN OD M1 STEEL HELMET WITH ADJUSTABLE LINER, $44.95
https://www.robertrtg.com/store/pc/A...R-404p7962.htm

[RTGparts]

British military surplus wire cutter with pouch. These appear unissued and are super stout, built for cutting through the toughest wire. Metal folding handles, Compact 10 x 3″ folded

BRITISH FOLDING WIRE CUTTER WITH POUCH, $26.95
https://www.robertrtg.com/store/pc/B...UCH-8p8981.htm

[RTGparts]

Polish WZ78 Tantal 'Pallad' handguard. Allows the pallad grenade launcher to be mounted onto the WZ78 Tantal rifle. This hard to find Polish Tantal accessory gives a great feel and unique look to any AK AKM AK74 style rifle. Colors vary. This listing is for reddish-brown bakelite.

TANTAL PALLAD HANDGUARD, POLISH RADOM, RED-BROWN BAKELITE, $129.95
https://www.robertrtg.com/store/pc/T...LITE-4p194.htm

[RTGparts]

Really nice quality British MTP Camo 9mm magazine pouch. Heavy duty polypropylene webbing material, closed style magazine pouch with hook/loop closure. Molle rear attachment.

Fits Glock 17, Glock 19, Browning Hi-Power and similar sized 9mm/.40 magazines.

BRITISH 9MM SINGLE MAG POUCH, MTP CAMO, $8.95
https://www.robertrtg.com/store/pc/B...AMO-8p8982.htm

[RTGparts]

WWII production Sturmgewehr Steel Buttcap. Correct for MP44/STG44 wood buttstocks.

These are original WWII production with what appears to be jvo codes stamped onto them. All are unissued but most have surface rust or pitting. Expect to give them some TLC or a blasting to look their best. The last image shows the range of corrosion you can expect.

STG44 STEEL BUTTCAP, $14.95
https://www.robertrtg.com/store/pc/S...P-208p8836.htm

[RTGparts]

Russian DSHK 51rd belt with starter tab. Hard to find long belt for your valuable DSHK collection.

DSHK 51RD BELT WITH TAB - RUSSIAN, $54.95
https://www.robertrtg.com/store/pc/D...N-193p3327.htm

[RTGparts]

Military surplus eye-wear is typically of great quality but you look like a moron wearing them. THESE ARE DIFFERENT!!! These look fantastic and are top of the line quality.

Swiss made sunglasses that look awesome! Stylish, Durable with great protection for your eyes! Frames are made of light poly-carbonate graphite colored material and feature brown lenses for increased contrast, flexible nose frame and offer 100% UVA & UVB protection up to 400 nanometer

Include removable lanyard. Very comfortable and light weight. Great for shooting, hiking, etc. You can't match the combination of quality and price anywhere. These are the best value in sunglasses.

These are Swiss surplus. Conditions range from surplus very-good to like new.

SWISS SUVASOL ARMY SUNGLASSES, $14.95
https://www.robertrtg.com/store/pc/S...OME-8p8856.htm

[RTGparts]

Czech M60 canteen kit. Includes wool cover, leather strap with fastener, aluminum canteen and stopper. Stopper might be plastic or a cork. Wool covers vary in color.

This is the correct canteen for use with the water drinking feature of your M10M Soviet Gas Mask (as shown in last image).

Great kits in surplus good to very good condition.

CZECH M60 CANTEEN KIT, CORRECT FOR USE WITH M10M GAS MASK, $10.99
https://www.robertrtg.com/store/pc/C...ASK-8p8998.htm

[RTGparts]

These are fun gag gifts for your desk or for your truck. Let those complainers and tailgaters know how you really feel, and have some fun with it!

GG&G CLAYMORE MINE DESK ACCESSORY, $48.45
https://www.robertrtg.com/store/pc/G...ORY-8p9018.htm


GG&G CLAYMORE MINE TRAILER HITCH COVER, $44.25
https://www.robertrtg.com/store/pc/G...VER-8p9019.htm

[RTGparts]

Hungarian military surplus OD Green, Aluminum Canteen. Used good to very-good condition.

Aluminum construction
Threaded cap with keeper
1.5 Inch mouth opening
1-qt. capacity

HUNGARIAN OD ALUMINUM CANTEEN, $8.99
https://www.robertrtg.com/store/pc/H...EEN-8p8995.htm

[RTGparts]

New old stock, US military issue .30 Cal Broken Shell Extractor.

US military issue, made in USA
Broken Shell Extractor for .30 Cal Carbine or .30-06 rifle cartridges
Precision-machined steel in matte black finish
2-pc. adjustable-length threaded design
Works on both bolt action and semi-auto rifles
Weight: 0.3 Ounce.
Length: 2.4 Inch.

USGI .30 CAL BROKEN SHELL EXTRACTOR NEW, $3.95
https://www.robertrtg.com/store/pc/U...NEW-8p8942.htm

[RTGparts]

AK47 AKM BLANK FIRING ADAPTER, SURPLUS VG, $2.95
https://www.robertrtg.com/store/pc/A...-VG-4p1658.htm


AK47 AKM BLANK FIRING ADAPTER NEW, $3.95
https://www.robertrtg.com/store/pc/A...NEW-4p6803.htm


AK BLANK FIRING ADAPTER FOR 24MM, $4.95
https://www.robertrtg.com/store/pc/A...4MM-4p1657.htm


BLANK FIRING ADAPTER - TANTAL, $19.95
https://www.robertrtg.com/store/pc/B...NTAL-4p133.htm

[RTGparts]

New old stock 20mm 10rd magazine. These were produced for the German army (Bundeswehr) and were used on a variety of weapons including the MK22 20mm cannon shown in image two. On the MK22 these are used as a specialty ammunition clip while the twin flexible chutes fed the more standard ammo.

20MM 10RD MAGAZINE NEW, GERMAN, $49.95
https://www.robertrtg.com/store/pc/2...AN-14p5990.htm

[RTGparts]

Gunplumber's Guide to HK Weapons Systems. 3 discs, 10 hours. Tool selection, tips, techniques, and arsenal level assembly and disassembly of: HK 91 / G3 HK 93 / 33 HK 94 / MP5 & MP5 SD PSG-1 & Ambi Trigger Groups HK P7 M8 HK USP HK Mk 23 SOCOM HK USC HK SL8 Benelli M1 Super 90.

GUNPLUMBERS GUIDE TO HK WEAPONS SYSTEMS, $64.95
https://www.robertrtg.com/store/pc/G...EMS-2p2388.htm